Arris DSR-7400 Series User manual

STARZ ENTERTAINMENT DSR-7400 SERIES QUICK START GUIDE
RF INPUTS: Connect RF inputs as labeled below.
ASI OUTPUTS: Connect ASI (or optional* IP) outputs as labeled below.
SIGNAL LOCK: Enter frequency and modulation parameters in the Quick Install menu to gain signal lock.
AUTHORIZATION: Contact Starz Affiliate Support for signal authorizations. [phone], Opt. #2
Write down UA 1 and UA 2, as you will need these when calling 888-783-2275, Opt. #2 for authorization.
AUTHORIZATION
Hit the “OK” button with “Quick Install” highlighted as shown.
SIGNAL LOCK Set and verify the following fields shown below:
Transponder 17 or 20
Symbol Rate 32.500
Input Port RF Port 1 or RF Port 3
Modulation Mode DVBS2
G13-V G15-V
Transcoded
SERVICES
ASI OUTPUTS
*GigE
OUTPUT
RF INPUTS
v. T2
PAGE 1 OF 2 (SEE REVERSE)
RF Port 11110.00 17
16APSK 32.500

ANALOG HOOKUP INSTRUCTIONS
ARRIS authorized distributors:
Advanced Media Technologies
3150 SW 15TH!Street
Deerfield Beach, FL 33442
Phone: [phone]
Fax: [phone]
Contacts: Ken Augustine and Neil Baruch
TVC Communications
10814 W. 78th St.
Shawnee, KS 66214
Phone: [phone]
Fax: [phone]!
Contact: Brent Scott
IF YOU WISH TO PURCHASE ADDITIONAL IRDs, PLEASE REACH OUT TO EITHER OF THE CONTACTS LISTED BELOW:
PAGE 2 OF 2
VIDEO
AUDIO 1
AUDIO 2