Artcobell TA-SA.F Series User manual

02.12.15 | Rv3
DISCOVER | INSTALLATION INSTRUCTIONS
Applicable Models:
TA-SA****.F
Use on Discover Teacher Desks,
Discover Shape Tables &
Discover Shape Student Desks
DISCOVER TEACHER DESKS
12”h Modesty Screen 12”h Privacy Screen 22”h Combination Screen
Discover
Teacher Desks
Single Pedestal
Double Pedestal
48”w
60”w
72”w
60”w
72”w
Number of Brackets
2
3
4
2
3
Modesty Screen Size
24.25 x 12”
36.25” x 12”
48.25” x 12”
24.25 x 12”
36.25” x 12”
Privacy Screen Size
24.25 x 12”
36.25” x 12”
48.25” x 12”
24.25 x 12”
36.25” x 12”
Combo Screen Size
24.25 x 22.5”
36.25” x 22.5”
48.25” x 22.5”
24.25 x 22.5”
36.25” x 22.5”
DISCOVER SHAPE TABLES
Table Width Table Depth
Table Width
Table Depth
36”w
48”w
60”w
72”w
24”d
30”d
36”d
# of Brackets
2
3
4
5
N/A
2
2
12”h Screens
24.25” x 12”
36.25” x 12”
48.25” x 12”
60.25” x 12”
N/A
24.25” x 12”
24.25” x 12”
22”h Screens
24.25” x 22.5”
36.25” x 22.5”
48.25” x 22.5”
60.25” x 22.5”
N/A
24.25” x 22.5”
24.25” x 22.5”
Other Discover Shapes
24” Screens may be used on the following shapes/sizes:
3P3060 (3), AP2440 (2), AP3050 (2), BR2046 (2), EX3054 (2), SQ36 (4), SQ42 (4), WG3060 (3), Student Desks RC2026 and RC2034
36” Screens may be used on the following shapes/sizes:
HR2448 (1), SQ48 (4)
60” Screens may be used on the following shapes/sizes:
HR3672 (1)
The following shapes support multiple sizes of screens:
BR3072 (2 –24” & 2 – 36”), TZ3060 (3 – 24” & 1 – 36”)
Screens

02.12.15 | Rv3
DISCOVER | INSTALLATION INSTRUCTIONS
SCREEN INSTALLATION
Figure 1 Recommended Pre-Drill on Rectangular Tables Only
Note: not all tables support above pre-drill locations
1. Once proper pre-drill location is determined and 2. Using a 5/32” allen wrench and included
with the desk in the upside down position, attach button head machine screws, attach
each L-bracket to top using the included #12 x 3/4” screen to each of the L-brackets.
Philips head wood screws. NOTE: It may be easier to
not fully tighten screws as this will help with alignment.
3. Tighten all fasteners and if needed, use two installers to flip the desk or table to the in-use position
All Teacher desk tops come pre-drilled from the factory for
installation of screen brackets. The approach side of the desk
has two pre-drill locations depending upon desired screen
application. See below for appropriate hole pattern.
Application Pre-Drill Location
Modesty Screen (12”h) A
Privacy Screen (12”h) B
Combination Screen (22”h) B
Note: Discover Shape Tables are NOT pre-drilled See Figure 1 for
recommended hole locations.

02.12.15 | Rv3
DISCOVER | INSTALLATION INSTRUCTIONS
DISCOVER SHAPE TABLES & SCREENS | Planning Drawings
APERATURE 24x40 APERATURE 30x50
- QTY 3 - DTT-AP2440 –APERTURE TABLES - QTY 3 - DTT-AP3050 - APERTURE TABLES
- QTY 3 - TA-SA1224 - SINGLE SCREEN 12"X24.25" - QTY 3 - TA-SA1224 - SINGLE SCREEN 12"X24.25"
BOOMERANG 20x46 BOOMERANG 30x72
- QTY 3 - DTT-BR2046 - BOOMERANG TABLES - QTY 3 - DTT-BR3072 - BOOMERANG SHAPE TABLES
- QTY 3 - TA-SA1224 - SINGLE SCREEN 12"X24.25" - QTY 3 - TA-SA1236 - SINGLE SCREEN 12"X36.25"
BOOMERANG 30x72
- QTY 4 - DTT-BR3072 - BOOMERANG SHAPE TABLES
- QTY 2 - TA-SA1236 - SINGLE SCREEN 12"X36.25"
- QTY 2 - TA-SA1224 - SINGLE SCREEN 12"X24.25"