Mocka Kennedy Coffee Table User manual

Kennedy Coffee Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
bolt
x26
bracket
x4 l g
bolt x4
on
len
key x1
al
x16
washer bolt
x16
screw
x8
long screw
x2
plug
x4
cover
x4
screw
x16
A B C D E F G
HJKLM
N
I
O
Hardware Supplied
PQR
dowel
x12
screw
x44
slide
rail x4
slide
rail x4
slide
rail x4
slide
rail x4
bracket
x4
S
locking
nut x26
T
felt pad
x4

Kennedy Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12
C
C
C
C
C
C
1
Insert 6x bolts (C) into panel [1] and tighten with a screwdriver. Attach 1x slide rail (F) and 1x slide rail (G) to panel [5] as shown with
4x screws (E). Flip the panel [5], attach 1x slide rail (F) and 1x slide rail
(G) to panel [5] as shown with 4x screws (E). Tighten with a screwdriver.
E
G
E
FE
E
F
G
E
E
E
E
FLIP
G
CR
E
F
CL
E
5
5

Kennedy Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
34
Attach panels [3] , [4] and [5] to panel [1] with 6x dowels (A) and
secure with 6x locking nuts (D). Tighten with a screwdriver.
Slide panels [6] down along the grooves between panels [1], [3], [4]
and [5].
A
A
A
A
A
A
D
D
D
D
D3
5
4
1
3
5
46
6
1

Kennedy Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
56
Attach 4x brackets (J) to panel [2] and secure with 8x screws (E).
Tighten with a screw driver. Place 4x covers (K) over the brackets
(J) as shown. Insert 4x bolts (C) into panel [2] and tighten with a
screwdriver.
Attach panel [2] to the unit with 6x dowels (A),secure with 2x long
screws (B) and 4x locking nuts (D). Tighten with a screwdriver.
E
E
K
J
J
The round head
is aligned with the
direction of the arrow
EE
J
EE
J
EE
J
EE
J
A
A
A
A
B
B
23
5
4
2
D
D
D
C
C
C
C

Kennedy Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
78
S
Attach 2x slide rail (F) and 2x slide rail (G) to panels [3] and [4] as shown
with 8x screws (E). Tighten with a screwdriver.
Attach a leg bracket (R) to each leg [7] using 2x screws (R) and
1x bolt (Q). Tighten with a screwdriver and Allen key (O). Attach
each leg [7] to panel [2] using 4x small bolts (S) and 4x washers
(N) as shown. Tighten with the Allen key (O). Attach 4x felt pads
(T) to the ends of the legs.
G
CR
E
N
NS
N
N
S
NS
N
2
front
back
S
N
N
O
Q
R
P
R
O
front x4
7
E
F
3
4
G
E
E
E
F
CL
E
E
T
T
T
T
T

Kennedy Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
9x2 10x2
C
10
11
Insert 4x bolts (C) into panel [8]/[9]. Attach 1x plug (L) to panel [8]/[9] and
secure with 1x screw (E).Tighten with a screwdriver.
Attach panel [10] and [11] to front panel [8]/[9] using 4x locking nuts (D).
Tighten with a screwdriver.
C
C
C
E
L
8
9
D
D
8
9
D
D

Kennedy Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
11x2 12x2
13
Slide panel [12] along the grooves between the side panels [10] and
[11] to form the base of the drawer.
Attach panels [10], [11] and [13] as shown using 4x screws (M).
Tighten with a screwdriver.
11
12
10
8
9
8
9
11
10
M
M
M
M

Kennedy Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
13x2 14
E
EI
E
E
H
Attach slide rails (K) and slide rails (I) to the underside of the side panels
as shown. Secure with 4x screws (E) and tighten with a screwdriver.
Insert the drawers into the unit as shown. If the door is not catching or
sitting flush, twist the end of the cover (K) until it catches on the plug (L).
Once assembled lift furniture into place, do not drag. You're done, enjoy!
8
9
10
11
8
9
9
8
K