Hodedah HI224-G User manual

Assembly Instructions
This instruction booklet contains important safety information, please read and keep for future reference.
HODEDAH ®
ITEM # HI224-G (MOP-SP)
4 DOOR PANTRY
2 people
90 mins
1 YR LTD
1 Box
www.Hodedah.com 1| Page
FRONT VIEW BACK VIEW
Weight Capacity per shelf 30lb.
Product Dimensions: Height 71.69" x Width 23.93" x Depth 14.6"

HODEDAH ®
www.Hodedah.com 2| Page
DO NOT RETURN PRODUCT TO THE STORE
Phone WebsiteEmail
Questions, need parts, we are here to help!
WARRANTY
WARNING
If parts are missing or damaged please contact our customer service team and we will
gladly ship your replacement parts FREE of charge within ONE YEAR of purchase!
Hodedah warrants this product to be free from defects in materials and workmanship and agrees to
remedy any such defect. This warranty covers one year from the date of original purchase. This is solely
limited to replacement of defective parts and no assembly for labor is included. This warranty does not
apply to any product that has been improperly assembled, subjected to misuse, abuse or which has been
altered or repaired in any way. To obtain warranty service, original purchaser must present the following;
original bill of sale, date of purchase, where the product was purchased and images if applicable.
Components replaced warranted through the remainder of the original warranty only. The defective part
will be replaced without charge, subject to the terms and conditions described above.
Mon - Fri | 9:30 am to 5pm EST Send us an email
FOR PROMPT, RELIABLE SERVICE PLEASE HAVE YOUR INSTRUCTION MANUAL READY
Visit our website to open a case
1 - 855 - HODEDAH
1 - 855 - 463 -3324
[email protected] www.Hodedah.com
·This product contains small parts, keep away from children.
·This product contains plastic bags, keep away from children.
·Serious or fatal crushing injuries can occur from furniture tip-over. To help
prevent this, place heaviest items on the lower shelves and drawers. Do not set
heavy objects on top shelves and drawers.
·Never allow children to climb or hang on drawers, shelves and doors.
·Never open more than one drawer at a time.
·The use of tip-over restraints may reduce but not eliminate the risk of tip-over.

HODEDAH ®
www.Hodedah.com 3| Page
Product Care and Maintenance
Let's get started…
·Never open more than one drawer at a time.
·The use of tip-over restranits may reduce but not eliminate the risk of tip-over.
·Make sure you receive all boxes. If your item is packed in one box, box count will read 1
of 1, likewise if your item is packed in two boxes, box count will read 1 of 2 and second
box will read 2 of 2.
·Read each step carefully. It is very important that each step is performed in the correct
order. If these steps are not followed in sequence, assembly difficulties will occur.
·Work in a spacious level area, preferably carpet, near the place the unit will be used.
·DO NO USE power tools to assemble your furniture, it will strip and damage parts.
·Your package should include the following hardware and parts. Parts are labeled or
stamped on the raw edge. Please inspect contents to ensure you have received all
components. If you are missing any hardware or parts please contact customer
service right away before assembly.
Helpful hints, read before beginning assembly
Assembly Tools Required (not supplied)
·Wipe clean with dry soft cloth, never use chemicals or cleaning products they will
damage the finish.
·Avoid placing your furniture in direct sunlight, as sunlight causes fading.
·Never push, drag or pull your furniture, to move to a new location carefully with
two or more people carry the unit to its new location.
·Avoid extreme changes in temperature by arranging furniture away from radiators,
heat and air vents and air conditioning units.
Hammer Phillips Screwdriver No Power Tools NeededTape Measure

HODEDAH ®
www.Hodedah.com 4| Page
Hardware List
Accessories
1QTY
Screw M6 x 40mm
Pvc Cap
3QTY
24 Pcs
4QTY QTY
6QTY 7QTY
Pvc Dowel
8QTY 9QTY
Nail
70 Pcs
10 QTY
Allen Key
1 Pc
11 QTY 12 QTY
4 Pcs
5
Protection Nail
H-Profile
2QTY
4 Pcs
8 Pcs
Important
1. Before you throw the package, please use the Check Box to identify the parts
and hardware to ensure that you have everything you need.
2. Check and measure the bolts before applying them to parts.
3. Do not completely tighten all hardware until the entire assembly is complete,
unless indicated otherwise.
H-Profile
20 Pcs
20 Pcs
8 Pcs
Shelf Support
Magnet + Metal Piece
Screw M3 x 12mm 8 Pcs
8 Sets
AIM
8 Pcs
Door Support
Screw M4 x 25mm
6 Pcs 1 Pc1 Pc
Handle
Screw M4 X 20mm
13
(separate from
hardware pack)
Anti-Tip Kit
QTY
1 PK

HODEDAH ®
www.Hodedah.com 5| Page
AQTY
1 Pc
BQTY CQTY
1 Pc
DQTY
1 Pc
EQTY FQTY
1 Pc 1 Pc
GQTY HQTY IQTY
Parts List
JQTY KQTY QTY
2 Pcs
MQTY
L
Left Side Panel
747 x 368 x 15mm
Back Strengthening Panel
578 x 76 x 15mm
Kick Panel
578 x 89 x 15mm
Right Side Panel
747 x 368 x 15mm
Right Side Panel
1069 x 368 x 15mm
Partition Panel
578 x 292 x 15mm
Left Side Panel
1069 x 368 x 15mm
Top Panel
578 x 368 x 15mm
Partition Panel
578 x 368 x 15mm
Front Strengthening Panel
578 x 76 x 15mm
Bottom Panel
578 x 368 x 15mm
Adjust Panels
578 x 292 x 15mm
Left Door
675 x 284 x 15mm
1 Pc
1 Pc1 Pc
1 Pc
1 Pc
1 Pc
1 Pc
NQTY
Right Door
675 x 284 x 15mm
1 Pc
OQTY
Left Door
942 x 284 x 15mm
1 Pc
QTY
1 Pc
QQTY RQTY
Back Panels
740 x 301 x 3mm
Right Door
942x 284 x 15mm
Back Panels
978 x 301 x 3mm
2 Pcs2 Pcs
P

HODEDAH ®
www.Hodedah.com 6| Page
The Breakdown

HODEDAH ®
www.Hodedah.com 7| Page
Pre - Assembly
Protection Nail
4 Pcs.
9
PANEL A
PANEL G
PANEL K
PANEL H
SHELF SUPPORT
8 Pcs.
4
Insert 8 shelf supports ④ into
panels A,G,Hand K’s non
thru holes.
Nail 4 Protection
Nail ⑨, with
hammer onto the
bottom edge of
panels Aand G.

HODEDAH ®
www.Hodedah.com 8| Page
Pre - Assembly
PANEL B
PANEL D
PANEL I
PANEL J
PANEL C
PANEL E
PANEL F
Pvc Dowel
24 Pcs.
3
7MAGNET
8 Pcs.
AIM
Insert magnets ⑦
onto panels C, F,
I and J 's non-thru
holes, make sure
the magnets.
Insert PVC dowels
③to panels
B, C, D,E,F, I
and J ’s non-thru
holes, using hammer
to gently tap them in.

HODEDAH ®
www.Hodedah.com 9| Page
Door Panel Assembly
7METAL PIECE
8 Pcs. 7Screw
M3 x 12mm
8 Pcs.
8DOOR SUPPORT
8 Pcs.
2 2
Handle
4 Pcs.
Handle Screw
M4 x 20mm
8 Pcs.
Fix and fasten metal pieces
⑦with screw ⑦at all door
panels M,N,Oand P.
Insert door supports ⑧to
both ends of all door panels
M,N,Oand P.
Fasten 2 screws ②from all
door panels M,N,Oand
P's thru hole into the handle
②holes.

HODEDAH ®
www.Hodedah.com 10| Page
Step 1
Screw
M 6 x 40mm
6 Pcs.
1Allen Key
1 Pc.
6
* Place and fix Panels B,C,D,E,Fonto Panel Gby inserting the (Left)
dowels onto the non-thru holes at Panel G.
* Using allen key ⑥to fasten screw ①from the 6 thru holes
of panel G.

HODEDAH ®
www.Hodedah.com 11| Page
Step 2
Screw
M 6 x 40mm
6 Pcs.
1Allen Key
1 Pc.
6
* Place and fix Panels B,C,D,E,Fonto Panel Aby inserting the (Right)
dowels onto the non-thru holes at Panel A.
* Using allen key ⑥to fasten screw ①from the 6 thru holes
of panel A.

HODEDAH ®
www.Hodedah.com 12| Page
Step 3
Nail
22 Pcs.
5H-PROFILE
1Pc.
11
Place 2 back Panels Ronto the back of the main unit, and join 2 panels Rtogether with
H-profile by slotting one side each of panel R into the track of H-profile. Then align them
properly for nailing.
Use hammer to install the nails at center of the edges. Nails should be about 100mm apart.

HODEDAH ®
www.Hodedah.com 13| Page
Step 4
Screw
M 6 x 40mm
4 Pcs.
1Allen Key
1 Pc.
6
* Place and fix Panels Iand Jonto Panel Kby inserting the (Left)
dowels onto the non-thru holes at Panel K.
* Using allen key ⑥to fasten screw ①on panel K.

HODEDAH ®
www.Hodedah.com 14| Page
Step 5
Screw
M 6 x 40mm
4 Pcs.
1Allen Key
1 Pc.
6
* Place and fix Panels Iand Jonto Panel Hby inserting the (Right)
dowels onto the non-thru holes at Panel H.
* Using allen key ⑥to fasten screw ①on panel H.

HODEDAH ®
www.Hodedah.com 15| Page
Step 6
Nail
24 Pcs.
5H-PROFILE
1Pc.
12
Place 2 back Panels Qonto the back of the main unit, and join 2 panels Qtogether with
H-profile by slotting panel Qinto the track of H-profile. Then align them properly for
nailing.
Use hammer to install the nails at center of the edges. Nails should be about 100mm apart.

HODEDAH ®
www.Hodedah.com 16| Page
Step 7
Screw M4 x 25mm
6Pcs.
10
Join upper part
and lower part
together.Fasten
screw ⑩using
holes on panels
Fand Eto panel
I.

HODEDAH ®
www.Hodedah.com 17| Page
Step 8
Place adjusting
panels Lonto
shelf supports.

HODEDAH ®
www.Hodedah.com 18| Page
Step 9
O
Cover screw heads
①with cap.
Install door panels M, N, Oand Pby pushing down the springs to
insert them onto each hole of panels J, I, & C.

HODEDAH ®
www.Hodedah.com
TP 6#x5/8'' Screw
2Pcs.
Mounting bracket
4Pcs.
Restraint strap
2Pcs.
·Attach the mounting bracket a to the furniture in the
solid part below the top panel a few inches away from the
side of the unit.
·Screw b through the smallest hole of a .
FITTING OF ANTI-TIP SAFETY STRAP
STEP 1:
STEP 2:
·Locate a stud in the wall
behind the unit,does not
have to be centered.
·Place the other mounting
bracket a on the wall
stud 2 inches below the
mounting bracket
secured to the back of
your unit.
·Attach to the wall stud
using c through the
smaller hole of a .
·Repeat the same step a few inches away from
the other side of the unit.
·Place the furniture into position so both mounting
brackets are vertically in line.
·Lace the end of the restraint strap through the
larger holes in each mounting bracket.
·Secure the straps and lock into place.
STEP :
TP 8#x2'' Screw
2Pcs.
BACK SIDE OF
TOP PANEL
WALL
FURNITURE
19| Page

HODEDAH ®
www.Hodedah.com 20| Page
Job Complete
In the interest of our environment please dispose of all packaging thoughtfully.
Enjoy & Thank you for purchasing from Hodedah!