Artcoustic Architect SL Series User manual

SL ARCHITECT SERIES
Owners manual
artcoustic.com

WELCOME TO THE WORLD
OF ARTCOUSTIC
ARTCOUSTIC LOUDSPEAKERS
Congratulations with your purchase of the Artcoustic
SL Architect in-ceiling speaker.
The SL Architect Series is created to provide impressive
sound from ultra thin and aesthetically pleasing loudspeakers.
The entire Architect line of in-ceiling loudspeakers will
surprise you.
Whether you are looking for true Hi-Fi music reproduction or
louder applications such as home cinema installations,
commercial installations, bars, restaurants and public
address setups, the Artcoustic SL Architect Series oers the
ultimate solution.
The SL Architect Series has been designed and Engineered
with the same high specifications as all the other Artcoustic
models, leaving no space for compromise on sound quality
and built. The SL Architect series consist of four models,
SL Architect 2-1 single source speaker to the larger
SL Architect 4-2 single source speaker,
the directional single source SL Architect 2-1 PAS and finally
the full-range single source speaker with high dynamic range
SL Architect F-1.
Thank you for purchasing the Artcoustic SL Architect Series.
All the best,
The Artcoustic Team
OWNERS MANUAL – SL ARCHITECT SERIES

SL Architect 2-1 PAS isometric view
ARTCOUSTIC LOUDSPEAKERS
FEATURES
HIGH FREQUENCY DRIVER
Dual Ring Radiator diaphragm with highly linear
suspension and low loss surrounds for high clarity
and clean transient response. Copper caps for
better HF extension and lower distortion and
wave-guide center plug, copper-clad aluwire.
WOOFER
Extra long excursion and aluminium Short
Circuiting Ring, 4-layer voice coil, anodised
aluminium for improved heat dissipation,
combined with Distortion Reduced Motor.
CROSSOVER
6 dB/octave low pass and
12 dB/octave high pass filter.
DESIGN FEATURES
Low resonance bae, exceptional low mounting
depth combined with very high SPL and dynamic
range.
EASY INSTALLATION
Quick and easy installation with in-house
developed Spider Grip metal mount.
OWNERS MANUAL – SL ARCHITECT SERIES
SL ARCHITECT SERIES
SL ARCHITECT 21, SL ARCHITECT 42, SL ARCHITECT F1
5 degrees angled tweeters, for controlled directivity and improved o axis response.
SL ARCHITECT 21 PAS
20 degrees angled, full-range all units.

MOUNTING INSTRUCTION
align grille holes with mounting screws
rotate grille until fixed
please follow instructions below
NEW ARTCOUSTIC IN-CEILING SPEAKER “O” GRILLE MOUNT SYSTEM

SPECIFICATIONS
TRANSDUCER
LF-MF 2 x 3 inch cones
HF 1 x 1 inch Dual Ring Radiator
CROSSOVER
Low Pass Filter 6 dB/octave 1000 Hz
High Pass Filter 12 dB/octave 4000 Hz
CONNECTION
Single amped Gold Plated Screw Terminals
PERFORMANCE
Operating Range 60 Hz (-3dB) to 40 kHz
Axial Sensitivity (Half Space SPL) LF/MF-HF 93 dB
Calculated Axial Output Limit (Half Space SPL) Average Peak 110 dB
Maximum Power Handling 60 Watt
Input Impedance Nominal 4 ohms
Nominal Beamwidth Horizontal 90° Vertical 90°
Recommended High Pass Filter 100 Hz, 24 dB/octave
DESIGN
Cabinet: Black, White, RAL, NCS
Screen: Black, White, RAL, NCS, Artcoustic Art Gallery
SL ARCHITECT 2-1 ARCHITECTURAL SPEAKER
ARTCOUSTIC LOUDSPEAKERS
OWNERS MANUAL – SL ARCHITECT SERIES
Horizontal 90°
Vertical 90°
NOMINAL BEAM
WIDTH
H: 240 W: 240 D: 74 mm
1.8 kg
OPERATING RANGE
DIMENSIONS
WEIGHT
SENSITIVITY
MAX SPL
MAXIMUM POWER
60 Hz 40 kHz
-3dB 60 Hz
110 dB
93 dB
60 Watt
Input impedance
Nominal 4 ohms
The smallest model in the in-ceiling line up. SL Architect 2-1 is the perfect solution
for multi-room applications, commercial installations, bars, restaurants, hotel
lobby’s etc. it’s also the perfect choice for Dolby Atmos eect speakers in Artcoustic
cinema systems.
Couple the SL Architect 2-1 with one of the powerful Artcoustic subwoofers and
experience the ultimate sound performance, within the typical Artcoustic reward
winning, discrete and aesthetic design.

ARTCOUSTIC LOUDSPEAKERS
SPECIFICATIONS
TRANSDUCER
LF-MF 4 x 3 inch cones
HF 2 x 1 inch Dual Ring Radiator
CROSSOVER
Low Pass Filter 6 dB/octave 1000 Hz
High Pass Filter 12 dB/octave 4000 Hz
CONNECTION
Single amped Gold Plated Screw Terminals
PERFORMANCE
Operating Range 65 Hz (-3dB) to 40 kHz
Axial Sensitivity (Half Space SPL) LF/MF-HF 96 dB
Calculated Axial Output Limit (Half Space SPL) Average Peak 115 dB
Maximum Power Handling 120 Watt
Input Impedance Nominal 4 ohms
Nominal Beamwidth Horizontal 90° Vertical 90°
Recommended High Pass Filter 100 Hz, 24 dB/octave
DESIGN
Cabinet: Black, White, RAL, NCS
Screen: Black, White, RAL, NCS, Artcoustic Art Gallery
SL ARCHITECT 4-2 ARCHITECTURAL SPEAKER
The SL Architect In-Wall 4-2 is more powerful than the 2-1 and is a single source,
high performance speaker, for more demanding applications.
The SL Architect 4-2 has an impressive operating dynamic range -3 dB 65 Hz and
extends to and impressive upper frequency response at 40 kHz, all matched with
an exceptional sound pressure at 115 dB. This makes the SL Architect 4-2 a true
all-rounder, fitting a large portfolio of applications.
OWNERS MANUAL – SL ARCHITECT SERIES
Horizontal 90°
Vertical 90°
NOMINAL BEAM
WIDTH
H: 300 W: 300 D: 74 mm
3.4 kg
OPERATING RANGE
DIMENSIONS
WEIGHT
SENSITIVITY
MAX SPL
MAXIMUM POWER
65 Hz 40 kHz
-3dB 65 Hz
Input impedance
Nominal 4 ohms
120 Watt
115 dB
96 dB

ARTCOUSTIC LOUDSPEAKERS
SPECIFICATIONS
TRANSDUCER
LF-MF 2 x 3 inch cones
HF 1 x 1 inch Dual Ring Radiator
CROSSOVER
Low Pass Filter 6 dB/octave 1000 Hz
High Pass Filter 12 dB/octave 3000 Hz
CONNECTION
Gold Plated Push Terminals
PERFORMANCE
Operating Range 70 Hz (-3dB) to 18 kHz
Axial Sensitivity (Half Space SPL) LF/MF-HF 94 dB
Calculated Axial Output Limit (Half Space SPL) Average Peak 112 dB
Maximum Power Handling 60 Watt
Input Impedance Nominal 4 ohms
Nominal Beamwidth Horizontal 60° Vertical 60°
Recommended High Pass Filter 100 Hz, 24 dB/octave
DESIGN
Cabinet: Black, White, RAL, NCS
Screen: Black, White, RAL, NCS, Artcoustic Art Gallery
SL ARCHITECT 2-1 PAS ARCHITECTURAL SPEAKER
OWNERS MANUAL – SL ARCHITECT SERIES
Horizontal 60°
Vertical 60°
NOMINAL BEAM
WIDTH
H: 300 W: 300 D: 153 mm
2.4 kg
OPERATING RANGE
DIMENSIONS
WEIGHT
SENSITIVITY
MAX SPL
MAXIMUM POWER
70 Hz 18 kHz
-3dB 70 Hz
112 dB
94 dB
60 Watt
Input impedance
Nominal 4 ohms
The SL Architect 2-1 (PAS - Point and Shoot) - is a high SPL, directional,
single-source speaker, incorporating the same ultra-thin and minimalistic design
of the existing Architect products. The PAS is perfect for Dolby Atmos speaker
applications and in-ceiling LCR configurations.
For ultimate sound reproduction, couple the SL Architect 2-1 PAS with one of our
powerful subwoofers.

ARTCOUSTIC LOUDSPEAKERS
SPECIFICATIONS
TRANSDUCER
LF-MF 1 x 5.5 inch cones
HF 1 x 1 inch Dual Ring Radiator
CROSSOVER
Low Pass Filter 6 dB/octave 1000 Hz
High Pass Filter 12 dB/octave 4000 Hz
CONNECTION
Single amped Gold Plated Screw Terminals
PERFORMANCE
Operating Range 40 Hz (-3dB) to 40 kHz
Axial Sensitivity (Half Space SPL) LF/MF-HF 90 dB
Calculated Axial Output Limit (Half Space SPL) Average Peak 105 dB
Maximum Power Handling 100 Watt
Input Impedance Nominal 8 ohms
Nominal Beamwidth Horizontal 90° Vertical 90°
Recommended High Pass Filter 100 Hz, 24 dB/octave
DESIGN
Cabinet: Black, White, RAL, NCS
Screen: Black, White, RAL, NCS
SL ARCHITECT F-1 ARCHITECTURAL SPEAKER
OWNERS MANUAL – SL ARCHITECT SERIES
Horizontal 90°
Vertical 90°
NOMINAL BEAM
WIDTH
H: 300 W: 300 D: 86 mm
3.5 kg
OPERATING RANGE
DIMENSIONS
WEIGHT
SENSITIVITY
MAX SPL
MAXIMUM POWER
40 Hz 40 kHz
-3dB 40 Hz
105 dB
90 dB
100 Watt
Input impedance
Nominal 8 ohms
The SL Architect F-1 is a full range single source speaker targeting multi-room
applications. The SL Architect F-1 performs with equal impressive
dynamic range within a residential solution as in a professional setup, such as
bars, restaurants, hotels, or simply anywhere, where the typical Artcoustic superior
quality sound reproduction is expected, all without the need of a subwoofer.
The SL Architect F-1 has an impressive operating dynamic range starting at
40 Hz (-3 dB) and extending to an impressive upper frequency response at 40 kHz.
The SL Architect F-1 is a true all-rounder, fitting a large portfolio of applications.

SCHEMATICS
dimension are in mmSL Architect 2-1 Architectural Speaker
52
18
9
74
4
terminals
Ø 215
Ø 240
side view
front view
cut dimension Ø 220mm
rear view
top view
isometric view
4
round grille, for in-ceiling and in-wall.
R166

SCHEMATICS
dimension are in mm
72
76
4
SL Architect 4-2 Architectural Speaker
Ø 300
cut dimension Ø 278mm
push terminals
isometric view
side view
top view
4
round grille, for in-ceiling and in-wall.
R166
front view
rear view

SCHEMATICS
dimension are in mmSL Architect 2-1 PAS Architectural Speaker
153
4
149
12
4
round grille, for in-ceiling and in-wall.
R166
Ø 300
33 degree
Ø 274
isometric view
front view
left view right view
top view
cut dimension Ø 278mm
rear view

SCHEMATICS
dimension are in mmSL Architect F-1 Architectural Speaker
push terminals
82
86
9
Ø 300
Ø 274
side view
4
round grille, for in-ceiling and in-wall.
R166
isometric view
cut dimension Ø 278mm
4
front view
top view
rear view

POLAR RESPONSE
ARTCOUSTIC LOUDSPEAKERS
OWNERS MANUAL – SL ARCHITECT SERIES
3D polar response 1mhorizontal polar response 1m vertical polar response 1m
SL ARCHITECT 2-1
1m
16000Hz
6500Hz
2500Hz
1000Hz
+3
90°
60°
30°
0°
360°
270°
210°
240°
180°
120°
150°
330°
300°
0
-3
-6
-9
dB
+3
90°
60°
30°
0°
360°
270°
210°
240°
180°
120°
150°
330°
300°
0
-3
-6
-9
dB
3D polar response 2mhorizontal polar response 2m vertical polar response 2m
SL ARCHITECT 4-2
2m
+3
90°
60°
30°
0°
360°
270°
210°
240°
180°
120°
150°
330°
300°
0
-3
-6
-9
dB
+3
90°
60°
30°
0°
360°
270°
210°
240°
180°
120°
150°
330°
300°
0
-3
-6
-9
dB
16000Hz
6500Hz
2500Hz
1000Hz
3D polar response 1mhorizontal polar response 1m vertical polar response 1m
SL ARCHITECT 2-1 PAS
1m
+3
90°
60°
30°
0°
360°
270°
210°
240°
180°
120°
150°
330°
300°
0
-3
-6
-9
dB
+3
90°
60°
30°
0°
360°
270°
210°
240°
180°
120°
150°
330°
300°
0
-3
-6
-9
dB
16000Hz
6500Hz
2500Hz
1000Hz

POLAR RESPONSE
ARTCOUSTIC LOUDSPEAKERS
OWNERS MANUAL – SL ARCHITECT SERIES
3D polar response 1mhorizontal polar response 1m vertical polar response 1m
SL ARCHITECT F-1
1m
+3
90°
60°
30°
0°
360°
270°
210°
240°
180°
120°
150°
330°
300°
0
-3
-6
-9
dB
+3
90°
60°
30°
0°
360°
270°
210°
240°
180°
120°
150°
330°
300°
0
-3
-6
-9
dB
16000Hz
6500Hz
2500Hz
1000Hz

ARTCOUSTIC LOUDSPEAKERS
OWNERS MANUAL – SL ARCHITECT SERIES
SAFETY INSTRUCTIONS
Do not use this
product near water
Clean rear panel
with dry cloth only
Do not block any
ventilation opening
Do not install near
any heat sources
If wall-mounted,
ensure the use of
matching screws
and rawl plugs
SAFETY
WARNING
This product complies with Part 15 of the FCC Rules.
Its operation is subject to the following two conditions:
- This product may not cause harmful interference.
- This product must accept any interference received,
including interference that may cause undesired operation.
To reduce the risk of fire and
electric shock do not expose this
product to rain or moisture.
Do not place product filled
with liquids such as vases
on the product.
Do not open product. There are no
user-serviceable parts inside.
Always use the power supply
shipped with this product.
Using a power supply with wrong
voltage or polarity, can damage
the electronics.
Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.

ARTCOUSTIC LOUDSPEAKERS
OWNERS MANUAL – SL ARCHITECT SERIES
WARRANTY
∙For deterioration of component parts, the nature of which is to become worn or
depleted with use, such as batteries.
∙For damages caused by incorrect installation, connection or packing.
∙For damages caused by accidents, lightning, water, fire heat, war, public
disturbances or any other cause beyond the reasonable control of Artcoustic
and its appointed distributors.
∙For damages caused by any use other than correct use described in the user
manual, negligence, modifications, or use of parts that are not made or authorized
by Artcoustic.
lf it is found necessary to return the product for repair, you will be given a form to fill out
and return. You should not return the product without previous acceptance. To validate your
warranty, you will need to produce the original sales invoice or other proof of ownership
and date of purchase.
Is valid only for products
purchased from an authorised
Artcoustic retailer or dealer.
Is valid from the date of purchase
for a period of 3-years for passive
loudspeakers, and 2-years for powered
loudspeakers and electronics.
Is limited to the repair of the
equipment (which could be a repair or
replacement at our discretion, neither of
which aects your original warranty).
Neither transportation, nor any
other costs, nor any risk for removal,
transportation and installation of products
is covered by this warranty.
Will not be applicable in cases other than defects in materials and/or workmanship
at the time of purchase and will not be applicable:
IS NOT APPLICABLE
IS APPLICABLE