Artesyn MVME7100ET User manual

MVME7100ET
Quick Start Guide
P/N:6806800L33B (June 2014)
Observe ESD-safe
measures
What’s in the box?
Install the board
When installing or servicing the
module or accessories, strictly
observe the safety precautions
in the Safety Notes. Otherwise,
personal injury or property dam-
age may occur.
Use either a properly grounded ESD
wrist strap or make sure that you are
working in an ESD-safe environment.
Make sure you receive all items of
your shipment:
• MVME7100ET board
• Printed Safety Notes
Prepare the installation
site
• Make sure that all environmental
and power requirements defined in
the MVME7100ET Installation and
Use manual are met.
• Remove all items from the box.
1. Attach an ESD strap to your wrist.
2. Attach the other end of the ESD
strap to an electrical ground. The
ESD strap must be secured to your
wrist and to ground throughout the
procedure.
3. Remove any filler panel that might
fill that slot.
4. Install the top and bottom edge of
the MVME7100ET into the guides of
the chassis.
5. Ensure that the levers of the two
injector/ejectors are in the outward
position.
6. Slide the MVME7100ET into the
chassis until you feel resistance.
7. Simultaneously move the injector/
ejector levers in an inward direction.
8. Verify that the MVME7100ET is
properly seated.
9. Secure the board to the chassis using
the two screws located adjacent to
the injector/ejector levers.
10.Connect the appropriate cables to
the MVME7100ET.
1
2
3
4

MVME7100ET-Quick Start Guide
Artesyn Embedded Technologies
Marketing Communications
2900 S. Diablo Way, Suite 190
Tempe, Arizona 85282
Artesyn Embedded Technologies
Lilienthalstr. 17-19
85579 Neubiberg/Munich
Germany
Finding more information
For more information on the product,
see the MVME7100ET Installation and
Use and other related documentation.
Visit our Web site
http://www.artesyn.com/computing
Use SUPPORT>TECHNICAL DOCUMENTA-
TION link to look for technical documenta-
tion.
Technical Assistance
To request technical assistance, visit
our Web site
http://www.artesyn.com
Install the board (contd)
When the MVME7100ET is
installed in a chassis, you are ready
to connect peripherals and apply
power to the board.
5