Article GEOME User manual

Assembly Instructions
GEOME
6 Drawer Double Dresser
VERSION 1.0

ASSEMBLY INSTRUCTIONS
Read these instructions carefully and keep for future
reference. Refer to parts inventory for guidance, and
ensure you have all pieces before starting.
When assembling, place all parts on a soft, clean, and flat
surface such as a carpet to prevent scratches.
If you’re having diculty, our friendly Customer Care
team is always here to help. Call us at 1.888.746.3455
during business hours, email [email protected] or chat
live at article.com.
GEOME 6 Drawer
Double Dresser Page 2 of 4
20 min
2
PARTS INVENTORY
ID DESCRIPTION QTY
LEG FRAME 2
SUPPORT BAR 1
M6 ×15MM BOLT 4
ALLEN KEY 1
M6 ×20MM BOLT 4
M6 LOCK WASHER 4
M6 WASHER 4
TIME # OF PEOPLE DIFFICULTY
ANTI-TIP
Installation Required

#
Page 3 of 4
1
2
Fully tighten all bolts.
!
!
× 4
× 4
100%
85%
50%
100%
85%50%
GEOME 6 Drawer
Double Dresser

Page 4 of 4
3
Adjust levelers on
leg frames as needed.
!
× 4
If the magnet on the door locking mechanism isn’t catching properly, adjust
the lock mechanism by twisting the dial on the end to extend it further outward.
!
GEOME 6 Drawer
Double Dresser

Children have died from furniture tipover.
To reduce the risk of furniture tipover:
• ALWAYS install tipover restraint provided.
• NEVER put a TV on this product.
• NEVER allow children to stand, climb or hang
on drawers, doors, or shelves.
• NEVER open more than one drawer at a time.
• Place heaviest items in the lower drawers.
20 min
3
TIME
REQUIRED TOOL
REQUIRED TOOL
8MM / 5/16" DRILL BIT
# OF PEOPLE DIFFICULTY
PARTS INVENTORY
ID DESCRIPTION QTY
BRACKET 4
M4 ×20MM SCREW 4
M8 ×51MM PLUG 4
M6 ×70MM SCREW 4
STRAP 2
ANTI-TIP RESTRAINT INSTALLATION
Page 1 of 3
ANTI-TIP Installation
WARNING!
Hardware (C/D) to attach brackets to wall is
designed for drywall. To attach this unit to another
type of wall, consult with your local hardware store.
1010 Raymur Ave.
Vancouver, BC V6A 3T2
VERSION 1.3

Page 2 of 3
12
3
Attach pair of brackets to top
corners of the back of the unit.
ANTI-TIP Installation
× 4
Mark on wall where second pair
of brackets should be placed.
× 2
× 4× 4 × 4
Drill holes in wall using
8mm / 5/16"drill bit.

Page 3 of 3
4A
4B
Align brackets on unit
with brackets on wall.
Pull strap down until it snap-locks.
ANTI-TIP Installation
× 2 × 2