Article SALINAS User manual

Assembly Instructions
SALINAS
Sideboard
VERSION 1.0

ASSEMBLY INSTRUCTIONS
Read these instructions carefully and keep for future
reference. Refer to parts inventory for guidance, and
ensure you have all pieces before starting.
When assembling, place all parts on a soft, clean, and flat
surface such as a carpet to prevent scratches.
If you’re having diculty, our friendly Customer Care
team is always here to help. Call us at 1.888.746.3455
during business hours, email [email protected] or chat
live at article.com.
SALINAS Sideboard Page 2 of 7
20 min
2
PARTS INVENTORY
ID DESCRIPTION QTY
CABINET FRAME 1
SLIDING DOOR 1 1
SLIDING DOOR 2 1
SHELF 2
SHELF PIN 8
TIME # OF PEOPLE DIFFICULTY
ANTI-TIP
Installation Required

SALINAS Sideboard Page 3 of 7
1
×8
× 4 × 4
2
Pull down to unlock.
!

SALINAS Sideboard Page 4 of 7
3
4
×2
Press button to lock.
!
Place the wheels at the
bottom of the door into
the outer groove.
!
The door should come
over the edge 100mm at
least before locked.
!
Lock in the outer groove.
!

#
Page 5 of 7
SALINAS Sideboard
5
Adjust the wheel at the bottom
of doors by screwing in or out
if the door is not straight.
!

#
Page 6 of 7
SALINAS Sideboard
7
6
Place the wheels at the bottom of
the door into the inner groove.
!
×2
Press button to lock.
!
Lock in the inner groove.
!
The door should come
over the edge 100mm
at least before locked.
!

#
Page 7 of 7
SALINAS Sideboard
8
Adjust the wheel at the bottom
of doors by screwing in or out
if the door is not straight.
!
Adjust sliding door 1
(B) wheel in position.
!

SALINAS Sideboard
Serious or fatal crushing injuries can occur from furniture
tip-over. To help prevent tip-over:
• Install tip-over restraint provided.
• Do not set heavy objects on top of this product,
unless the product is specifically designed to
accomodate them.
• Never allow children to climb or hang on mirrors,
shelves, consoles, or cabinets with doors and/or
drawers.
Use of tip-over restraints may only reduce but not
eliminate, the risk of tip-over.
20 min
3
TIME
REQUIRED TOOL
# OF PEOPLE DIFFICULTY
PARTS INVENTORY
ID DESCRIPTION QTY
BRACKET 4
M4 ×20MM SCREW 4
M8 ×51MM PLUG 4
M6 ×70MM SCREW 4
STRAP 2
ANTI-TIP RESTRAINT INSTALLATION
Page 1 of 4
WARNING!
Hardware (C/D) to attach brackets to wall is
designed for drywall. To attach this unit to another
type of wall, consult with your local hardware store.
REQUIRED TOOL
8MM / 5/16" DRILL BIT
1010 Raymur Ave.
Vancouver, BC V6A 3T2

SALINAS Sideboard
1
23
Mark on wall where second pair
of brackets should be placed.
Attach pair of brackets to top
corners of the back unit.
Align brackets on unit with brackets on wall.
Page 2 of 4
×4 ×2

SALINAS Sideboard
4
5A
Page 3 of 4
× 4× 4 × 4
Drill holes in wall using
8mm / 5/16"drill bit.
Align brackets on unit with brackets on wall.