Article NERA User manual

Assembly Instructions
NERA
Bed with Nightstands
VERSION 1.4

ASSEMBLY INSTRUCTIONS
Read these instructions carefully and keep for future
reference. Refer to parts inventory for guidance, and
ensure you have all pieces before starting.
When assembling, place all parts on a soft, clean, and flat
surface such as a carpet to prevent scratches.
If you’re having diculty, our friendly Customer Care
team is always here to help. Call us at 1.888.746.3455
during business hours, email [email protected] or chat
live at article.com.
NERA Bed with Nightstands Page 2 of 21
1+ hours
5
TIME # OF PEOPLE DIFFICULTY
PARTS INVENTORY
ID DESCRIPTION QTY
HEADBOARD 1
LEFT SIDE HEADBOARD 1
RIGHT SIDE HEADBOARD 1
FOOTBOARD 1
CENTER BEAM BRACKET 2
LEFT SIDE RAIL 1
RIGHT SIDE RAIL 1
LEFT CORNER PIECE 1
RIGHT CORNER PIECE 1
LEG 2
PARTS INVENTORY CONT.
ID DESCRIPTION QTY
CENTER BEAM 1
CENTER LEG BRACKET
PREINSTALLED 2
FLOATING CENTER LEG 2
LEFT NIGHTSTAND MOUNTING BRACKET 1
RIGHT NIGHTSTAND MOUNTING BRACKET 1
LEFT NIGHTSTAND 1
RIGHT NIGHTSTAND 1
SLAT CLIP 28
SLAT 28
SLAT CENTER BRACKET 14
REQUIRED TOOL
Pozidriv screwdriver
REQUIRED TOOL
Phillips screwdriver

Page 3 of 21
HARDWARE / TOOLS INVENTORY
ID DESCRIPTION QTY
WOOD DOWEL 8
DOUBLE COMPRESSION
FITTING ANCHOR 6
ALLEN KEY 1
M10 ×10MM SCREW 12
TEFLON PAD 2
THIN ALLEN KEY 1
M6 ×12MM BOLT 4
LONG COMPRESSION
FITTING ANCHOR 4
HARDWARE / TOOLS INVENTORY CONT.
ID DESCRIPTION QTY
SHORT COMPRESSION
FITTING ANCHOR 10
M8 ×8MM SCREW 14
M6 ×20MM BOLT
4 PREINSTALLED ON CENTER LEGS 12
M8 ×15MM BOLT 4
M4 ×17MM SCREW 4
M8 ×60MM BOLT 4
M8 ×40MM BOLT 4
10
11
12
13
14
15
DO NOT DRAG BED, ALWAYS LIFT WITH
AT LEAST TWO PEOPLE BEFORE MOVING
NERA Bed with Nightstands
DO NOT SIT OR STAND ON NIGHTSTAND
MAY CAUSE INJURY AND/OR STRUCTURAL DAMAGE
Structural integrity is warranted only if all
fasteners are properly installed & tightened,
and the bed is moved only per instructions.

Page 4 of 21
1A
×8 ×6
Holes on double compression
fitting anchors (2) must be facing
inwards on headboard (A).
!
NERA Bed with Nightstands
BACK SIDE OF HEADBOARD

Page 5 of 21
1B
×12
NERA Bed with Nightstands
Note orientation of holes
on side headboards (B/C).
Secure first 6 screws (4) into headboard (A) first
before attaching left and right side headboards (B/C).
!
!
BACK SIDE OF HEADBOARD

Page 6 of 21
NERA Bed with Nightstands
2A
×2
First remove plastic backing
from teflon pads (5). Stick on
bottom side of headboard (A)
approx. 1/4” in from the edges.
!
FRONT SIDE OF HEADBOARD

Page 7 of 21
2B
NERA Bed with Nightstands
×4
Use the 4 shortest bolts (7) provided.
Ensure center beam brackets (E)
are level when installed.
!
!
!

×6
Page 8 of 21
3
NERA Bed with Nightstands

Page 9 of 21
×4
4
NERA Bed with Nightstands

Page 10 of 21
5
NERA Bed with Nightstands
THIS SIDE UP
THIS SIDE UP
×4