Article LENIA 19193 User manual

Assembly Instructions
LENIA
Cabinet
VERSION 1.0

Page 2 of 10LENIA Cabinet
ASSEMBLY INSTRUCTIONS
Read these instructions carefully and keep for future
reference. Refer to parts inventory for guidance, and
ensure you have all pieces before starting.
When assembling, place all parts on a soft, clean, and flat
surface such as a carpet to prevent scratches.
team is always here to help. Call us at 1.888.746.3455
during business hours, email [email protected] or chat
live at article.com .
20 min
3
TIME# OFPEOPLE DIFFICULTY
REQUIRED TOOL
ANTI-TIP
Installation Required
PARTS INVENTORY
ID DESCRIPTION QTY
CABINETFRAME 1
LEFT LEG 1
RIGHT LEG 1
SUPPORT BAR 1
SHELF2
CAM LOCKBOLT 2
CAM LOCKNUT 2
ALLEN KEY 1
M8 × 20MM BOLT 8
BLOCK WAHSER M8 8
WASHER M8 8
SHELF PIN 8
PARTS INVENTORY CONT.
ID DESCRIPTION QTY
BRACKET 4
M4 × 20MM SCREW 4
M8 × 51MM PLUG 4
M6 × 70MM SCREW 4
STRAP 2
Hardware (C/D) to attach brackets to wall is
designed for drywall. To attach this unit to another
type of wall, consult with your local hardware store.

#
Page 3 of 10LENIA Cabinet
2
1

#
#
Page 4 of 10LENIA Cabinet
4
3
×2

#
Page 5 of 10LENIA Cabinet
6
Crossbar is situated at the
front side of the cabinet.
!
×8
5
×4 ×4
Insert shelf pins (L) on left side
and secure shelves (E) on pins.
!

#
#
Page 6 of 10LENIA Cabinet
8
7
Insert shelf pins (L) on right side
and secure shelves (E) on pins.
!
×4 ×4
×4
Adjust levelers for balance.
!

LENIA Cabinet
Anti-Tip Installation Page 7 of 10
#
#10
9
11A
Attach pair of brackets to top corners
of the back of the unit. Note there are
no existing pilot holes on the product.
Mark on wall where second pair
of brackets should be placed.
Drill holes in wall using
8mm / 5/16"drill bit.
× 4 × 2
× 4× 4 × 4

LENIA Cabinet
Anti-Tip Installation Page 8 of 10
#
#
Align brackets on unit
with brackets on wall.
Pull strap down until it snap-locks.
× 2 × 2
11B
11C

Page 9 of 10
#
LENIA Cabinet
Door Adjustment Instructions
1A
Pull strap down until it snap-locks.
× 2 × 2
During shipping, the doors of your cabinet may have
shifted slightly. This can easily be corrected by tightening
a few screws. Always start by adjusting the top hinge on
the aected door.
REQUIRED TOOL
DOOR ADJUSTMENT INSTRUCTIONS

Page 10 of 10
LENIA Cabinet
Door Adjustment Instructions
#
If the door needs adjustment side to side:
1B