Article CULLA User manual

Assembly Instructions
CULLA
Desk
VERSION 1.1

ASSEMBLY INSTRUCTIONS
Read these instructions carefully and keep for future
reference. Refer to parts inventory for guidance, and
ensure you have all pieces before starting.
When assembling, place all parts on a soft, clean, and flat
surface such as a carpet to prevent scratches.
If you’re having diculty, our friendly Customer Care
team is always here to help. Call us at 1.888.746.3455
during business hours, email [email protected] or chat
live at article.com.
CULLA Desk Page 2 of 5
15 min
1
PARTS INVENTORY
ID DESCRIPTION QTY
LEG FRAME 2
ALLEN KEY 1
M8 ×25MM BOLT 12
TIME # OF PEOPLE DIFFICULTY
ANTI-TIP KIT INVENTORY
ID DESCRIPTION QTY
BRACKET 1
M6 ×15MM BOLT 1
M8 ×51MM PLUG 1
M6 ×70MM SCREW 1
ANTI-TIP
Installation Required
Hardware (F/G) to attach brackets to wall is
designed for drywall. To attach this unit to another
type of wall, consult with your local hardware store.

CULLA Desk Page 3 of 5
1
× 12

Page 4 of 5CULLA Desk
WARNING!
ANTI-TIP RESTRAINT INSTALLATION
Serious or fatal crushing injuries can occur from furniture
tip-over. To help prevent tip-over:
• Install tip-over restraint provided.
• Do not set heavy objects on top of this product,
unless the product is specifically designed to
accomodate them.
• Never allow children to climb or hang on mirrors,
shelves, consoles, or cabinets with doors and/or
drawers.
Use of tip-over restraints may only reduce but not
eliminate, the risk of tip-over.
20 min
3
TIME
REQUIRED TOOL
# OF PEOPLE DIFFICULTY
REQUIRED TOOL
8MM / 5/16" DRILL BIT
1

Page 5 of 5
2
3
Place unit in desired location and mark on
wall where hole should be drilled.
Drill hole into drywall, insert wall plug (F),
and attach unit to wall.
CULLA Desk