Article 3213 User manual

Serious or fatal crushing injuries can occur from furniture
tip-over. To help prevent tip-over:
• Install tip-over restraint provided.
• Do not set heavy objects on top of this product,
unless the product is specifically designed to
accomodate them.
• Never allow children to climb or hang on mirrors,
shelves, consoles, or cabinets with doors and/or
drawers.
Use of tip-over restraints may only reduce but not
eliminate, the risk of tip-over.
20 min
2
TIME
REQUIRED TOOL
# OF PEOPLE DIFFICULTY
PARTS INVENTORY
ID DESCRIPTION QTY
BRACKET 2
M8 ×51MM PLUG 4
M6 ×70MM SCREW 4
STRAP 2
ANTI-TIP RESTRAINT INSTALLATION
Page 1 of 3
MIRROR Anti-Tip Installation
WARNING!
Hardware (B/C) to attach brackets to wall is
designed for drywall. To attach this unit to another
type of wall, consult with your local hardware store.
REQUIRED TOOL
8MM / 5/16" DRILL BIT
1010 Raymur Ave.
Vancouver, BC V6A 3T2

Page 2 of 3
1
3
MIRROR Anti-Tip Installation
× 2
Place mirror in desired location and mark on wall where brackets (A) should be placed.
× 4× 4 × 4
Drill holes in wall using
8mm / 5/16"drill bit.

Page 3 of 3
MIRROR Anti-Tip Installation
3
Wrap straps (D) through pre-installed brackets on mirror and thread through brackets (A) on wall.
Pull straps until they snap-lock.
× 2