Article NERA 6 Drawer Double Dresser User manual

Assembly Instructions
NERA
6 Drawer Low Double Dresser
VERSION 1.0

ASSEMBLY INSTRUCTIONS
Read these instructions carefully and keep for future
reference. Refer to parts inventory for guidance, and
ensure you have all pieces before starting.
When assembling, place all parts on a soft, clean, and flat
surface such as a carpet to prevent scratches.
If you’re having difficulty, our friendly Customer Care
team is always here to help. Call us at 1.888.746.3455
during business hours, email [email protected] or chat
live at article.com.
Page 2 of 3
15 min
2
PARTS INVENTORY
ID DESCRIPTION QTY
CENTER LEG 1
SIDE LEG FRAME 2
M6 × 15MM BOLT 16
ALLEN KEY 1
TIME # OF PEOPLE DIFFICULTY
ANTI-TIP
Installation Required
NERA 6 Drawer Low Double Dresser

Page 3 of 3
2
1
Adjust levelers on
legs as needed.
!
×4
×12
NERA 6 Drawer Low Double Dresser

SOFT CLOSING DRAWERS – NERA
ADJUSTMENT INSTRUCTIONS
FIX A CROOKED DRAWER
If you’re having difficulty, our friendly Customer Care team is
always here to help. Call us at 1.888.746.3455 during business
hours, email [email protected] or chat live at article.com.
Adjust levers on either side of drawer
as needed to straighten drawer.
!
×2

REMOVE DRAWER
1
2
Unlock!
×2

INSTALL DRAWER
1
2
Lock!
×2
×2

Children have died from furniture tipover.
To reduce the risk of furniture tipover:
• ALWAYS install tipover restraint provided.
• NEVER put a TV on this product.
• NEVER allow children to stand, climb or hang
on drawers, doors, or shelves.
• NEVER open more than one drawer at a time.
• Place heaviest items in the lower drawers.
20 min
3
TIME
REQUIRED TOOL
REQUIRED TOOL
8MM / 5/16" DRILL BIT
# OF PEOPLE DIFFICULTY
ANTI-TIP RESTRAINT INSTALLATION
Page 1 of 3
ANTI-TIP Installation
WARNING!
1010 Raymur Ave.
Vancouver, BC V6A 3T2
PARTS INVENTORY
ID DESCRIPTION QTY
ANGLE PLATE 2
Ø3,5 × 13MM SCREW
2
Ø8 × 40MM PLUG 2
2
4
VERSION 1.0
M5 × 18MM WASHER
Ø4 × 45MM SCREW

Page 2 of 3
ANTI-TIP Installation
1
2 31
42 mm
1 5/8"
343 mm
13 1/2"
343 mm
13 1/2"
Drill holes in wall using
8mm / 5/16" drill bit.

Page 3 of 3
ANTI-TIP Installation
2