Article JOKUNA User manual

Assembly Instructions
JOKUNA
Media Unit
VERSION 1.0

ASSEMBLY INSTRUCTIONS
Read these instructions carefully and keep for future
reference. Refer to parts inventory for guidance, and
ensure you have all pieces before starting.
When assembling, place all parts on a soft, clean, and flat
surface such as a carpet to prevent scratches.
If you’re having diculty, our friendly Customer Care
team is always here to help. Call us at 1.888.746.3455
during business hours, email [email protected] or chat
live at article.com.
JOKUNA Media Unit Page 2 of 6
20 min
2
PARTS INVENTORY
ID DESCRIPTION QTY
LEGS 2
SUPPORT BAR 2
CENTER SHELF 2
PANEL 1 1
PANEL 2 1
PARTS INVENTORY CONT.
ID DESCRIPTION QTY
ALLEN KEY 1
M4 ×40MM SCREW 4
M6 ×30MM BOLT 14
SHELF PIN 8
TIME # OF PEOPLE DIFFICULTY
ANTI-TIP
Installation Required

Page 3 of 6
1
×14
× 4
JOKUNA Media Unit

Page 4 of 6
2
×8
3
JOKUNA Media Unit
×4 ×4
Pull to lock.
!

Page 5 of 6
5
4
Press button to lock.
!
JOKUNA Media Unit

Page 6 of 6
7
6
JOKUNA Media Unit
Adjusting the wheel at the bottom of door by
screwing in or out when the door does not fit
to assemble or it’s loose after assembling.
!

Serious or fatal crushing injuries can occur from furniture
tip-over. To help prevent tip-over:
• Install tip-over restraint provided.
• Do not set heavy objects on top of this product,
unless the product is specifically designed to
accomodate them.
• Never allow children to climb or hang on mirrors,
shelves, consoles, or cabinets with doors and/or
drawers.
Use of tip-over restraints may only reduce but not
eliminate, the risk of tip-over.
20 min
3
TIME
REQUIRED TOOL
# OF PEOPLE DIFFICULTY
PARTS INVENTORY
ID DESCRIPTION QTY
BRACKET 4
M4 ×20MM SCREW 4
M8 ×51MM PLUG 4
M6 ×70MM SCREW 4
STRAP 2
ANTI-TIP RESTRAINT INSTALLATION
Page 1 of 4
CABINET Anti-Tip Installation
WARNING!
Hardware (C/D) to attach brackets to wall is
designed for drywall. To attach this unit to another
type of wall, consult with your local hardware store.
REQUIRED TOOL
8MM / 5/16" DRILL BIT
1010 Raymur Ave.
Vancouver, BC V6A 3T2

1
23
Mark on wall where second pair
of brackets should be placed.
Attach pair of brackets to top
corners of the back unit.
Align brackets on unit with brackets on wall.
JOKUNA Media Unit Page 2 of 4
×4 ×2

4
5A
JOKUNA Media Unit Page 3 of 4
× 4× 4 × 4
Drill holes in wall using
8mm / 5/16"drill bit.
Align brackets on unit with brackets on wall.

5B
JOKUNA Media Unit Page 4 of 4
Pull strap down until it snap-locks.
× 2 × 2