artisan 335 B User manual

Threading Guide

Blank on purpose

3
Artisan 335B
Table of Contents
Page 4 Step 1…...Thread stand
Page 5 Step 2…..Upper thread post
Page 6 Step 3…..Threading Image
Page 7 Step 4…..Threading Route
Page 8 –11….Closer view of threading
Page 12 Step 5…..Threading the libra
Page13 Step 6…..Felted thread guide
& center press shaft threading
Page14 - 15 Step 7…..Through needle and
center presser foot

4
Artisan 335B
The thread stand and thread guide
need to be parallel to each other for
the correct tension to be maintained.
The thread will move off the spool to
the back of the guide feeding from
back to front.
Step 1
Fig 4-1

5
Artisan 335B
Step 2
The thread will go thru the top hole
then around the pin passing thru the
bottom hole as shown in image above.
Fig 5-1

6
Artisan 335B
Step 3
The thread then passes thru the bot-
tom tension guide opening as illus-
trated above.
Fig 6-1

7
Artisan 335B
Step 4
1
2
3
4
5
6
7
8
1. Start from tension post to lower guide
opening
2. Through lower opening under rod
3. Over and around ,pulled into top tension
screw guide
4. Down and around lower tension guide
5. Over rod
6. Under and around lowest tension guide
7. Around guide all the way up past inter
thread hook
8. Up through thread guide upper
Fig 7-1

8
Artisan 335B
Closer view of operation 1, 2, and 3 from
previous page 7
Fig 8-1

9
Artisan 335B
Closer view of operation 4, 5, 6, 7, and 8 from previ-
ous page 7
1. Around guide all the way up past inter thread hook.
Pulling thread all the way into guide groove.
Fig 9-1

10
Artisan 335B
Another view of lower guide retainer
Fig 10-1