ASBER EFTE-800 Parts list manual

1
Generalinstructionforinstallation,useandmaintenance
ELECTRICFRYTOP
Models:
EFTE-400
EFTE-800
EFTE-400T
EFTE-800T

2
Dear Customer
We would like to thank you for the confidence you have shown in our product on purchasing a
professional appliance. We are totally convinced that in time you will be completely satisfied with
your purchase.
Take a few minutes of your time and get to know the appliance with this instructions manual and
"down to work": the easy to understand graphical information replaces pages full of writing.
Nevertheless, we recommend you thoroughly read this manual compiled by FAGOR's kitchen
supervisors, in order to benefit to the maximum from the multiple possibilities and advantages this
appliance offers you.
Keep this manual near to the appliance and at all times in an accessible place.
ASBER
INDEX
INSTALATION..............................................................................................................................3
Generalandconnectiondimensions......................................................................................3
Technicalspecifications..........................................................................................................6
Positioningandleveling..........................................................................................................7
Electricalconnection..............................................................................................................7
USE..............................................................................................................................................8
Usingtheappliance................................................................................................................8
MAINTENANCE...........................................................................................................................9
ENVIRONMENTALPROTECTIONRECOMMENDATION.............................................................10

3
INSTALATION
Generalandconnectiondimensions
EFTE-400
EFTE-400T

4
EFTE-800
EFTE-800T


W–pointer
P–termostatcontrol
K–controllight
CO–resetswitchofsafetythermostat


5

Drawing 1


Drawing 2

REGULATEDLEGS
OFFMINIMUMMAXIMUM

6
Technicalspecifications
Table 1
Model EFTE-400 EFTE-800
External
dimension
Width
[mm]
400 800
Depth 700 700
Height 930 930
Height T model 370 370
NET WEIGHT [kg] 30
NET WEIGHT T models [kg] 25
Heating elements Resistance 1,4 kW 3 6
Electric power
50/60Hz
380-415 V
3N
Wire cross 5 x 1,5mm2 5 x 2,5mm2
Electrical protection 16A 16A
Power [kW] 4,2 8,4
Air consumption
Table 2
Model Air consumption necessary for
combustion Nm3/h
EFTE-400 5
EFTE-400T
EFTE-800 9
EFTE-800T
Temperatures for the various stages
Table 3
123456
0 C 50 C 100 C 150 C 200 C 250 C 300 C

7
Positioningandleveling
∗The positioning and gas installation should always be carried out by an AUTHORISED
TECHNICIAN, observing the standards of each country.
∗It is advisable to install an extraction hood for the optimum operation of the appliance.
∗Place the appliance in a well ventilated place.
∗Level and adjust the height of the appliance Drawing 1.
Electricalconnection
An AUTHORISED TECHNICIAN should always carry out the appliance’s electrical connection.
The legal standards in force in each country on connections to the mains should be taken into account.
Check that the mains voltage corresponds to that indicated on the nameplate.
Use cable sleeves made out of polychloroprene or other similar materials (H05RN-F), for the
connection.
Put an autonomous power switch with fuses into the mains socket, with a minimum distance
between contacts of at least 3mm.
It is obligatory to earth the appliance. The manufacturer takes no responsibility if this
requirement is not fulfilled.
The section of cable and the rating of the fuses to be installed in the power switch are indicated in
Table 1.
WARNING !!! IMPORTANT !!!
Before putting the switchboard top ON, fasten the electric supply cable tightly to the stuffing box.
When several appliances are installed in series, they should be earthed to each.

8
USE
Usingtheappliance
Turning the fry top ON
Activate the power switch located outside of the device (if installed).
Turn the adjustment thermostat control “P” clockwise until control light “K” turns ON.
Turn the adjustment thermostat control “P” clockwise to the required position Fig. 2.
Operation
When the vat reaches the selected temperature the thermostat light turns OFF and the
resistors stop operating. Furthermore, when the temperature drops below the selected value,
the red thermostat light turns ON and the resistors start to operate.
Safety thermostat
The safety thermostat works when the maximum admissible temperature is exceeded making
it impossible to use appliance. To start it up again, reset the safety thermostat, situated on the
bottom of the control panel, pressing the red button.
If the safety thermostat were to cut off power again, call the Technical Assistance Service.
Turning the appliance OFF
To turn OFF the device, turn the thermostat control anticlockwise to position 1 – OFF Fig. 2.
Control light “K” should be disable in this position.
WARNING !!! IMPORTANT !!!
Don’t leave the device at the time included the absence of the heat (empty vat). Overheat
can damage appliance.
The device must be operated and stored in heated rooms during winter.

9
MAINTENANCE
Daily cleaning.
Clean all the stainless steel surfaces and the inside of the plate daily with lukewarm water and
detergent. Rinse with plenty of cold water and dry it, paying special attention to the bottom of
the fry-top plate.
Do not scratch the stainless steel surfaces with spatulas or iron wire brushes.
If they are not going to be used for a long while, cover the surfaces with a thin layer of
Vaseline, above all inside the tub.
IMPORTANT !!!
Do not use water hose to clean the appliance as they may damage its operating components.
Operating components
- Adjustment thermostat – P
- Safety thermostat – CO
- Resistance
- Contactor
Repair and claim notification.
IMPORTANT !!!
The replacement of a functional component must be carried out by an AUTHORISED
TECHNICIAN.
As a rule, whenever an operating component is being replaced, the electric current to the
appliance must be cut off with the general power switch.

10
ENVIRONMENTALPROTECTIONRECOMMENDATION
On ending its useful life, this product must not be thrown away in a standard
rubbish bin, but must be left in an electrical waste and electronic equipment
collection point for recycling.
This is confirmed by the symbol on the product, user manual, or packaging.
Depending on the symbol, the materials can be recycled. By recycling and
other ways of processing electrical waste and electronic equipment, you can
significantly contribute to protecting the environment.
Contact your local authorities for more information of the nearest collection
point.
To conserve the environment at the end of the useful life of your product.
Leave it in the appropriate places in accordance with the current legislation.

Thisapplianceisonlyforprofessionalusageandmust
beusedbyqualifiedpersonnel.