ASC Terra Cotta Cascade SF014 User manual

1
SF014 Solar Terra Cotta Cascade Instructions
By All Solar Central
www.allsolarcentral.com
Thank you from the entire ASC family for purchasin
an ASC solar product! Please read this entire booklet
before assembly.
Package contents:
1 x Cascade Frame
1 x Frame Base
1 x Iron Adaptor Tube
1 x Screw
1 x Top Jar
3 x Small Bowls
1 x Bi Bowl
1 x Water Pipe and Rubber Bun
1 x Water Pump with 16 ft. Cable
1 x Solar Panel with Bracket
2 x Extension Tube
1 x Ground Spike
Notes: If there is any dama e to the product or missin
parts, please contact us at 1-626-582-8898 or
www.allsolarcentral.com/contactus
Assembly Steps:
1. Attach Iron Adaptor Tube to the Frame Base
2. Attach Cascade Frame to the Iron Adaptor Tube
3. Secure the Cascade Frame to the Frame Base
with a provided screw.
4. Attach Water Pipe to Top Jar with a provided
Black Rubber Bun
5. Attach the pipe to the Iron Frame.

2
6. Place the Bi Bowl and 3 Small Bowls onto the
Iron Frame as shown below:
7. Attach the Pump to the Water Pipe and put the
pump in the Bi Bowl.
8. Add appropriate amount of clean water into the
Bi Bowl and make sure the pump is fully
submer ed in the water.
9. Connect the bracket, tubes and spike to ether.
Then attach the solar panel to the bracket. Slide
the holdin bracket into the inside lip of the top
half of the solar panel frame. The bracket holds
the wei ht of the solar panel. The solar panel can
be adjusted for optimal sunli ht by usin the
win nut. Please see the dia ram.
10. Insert the spike into the round. Position the
solar panel so it’s facin south (in northern
hemisphere) as much as possible to maximize
dayli ht hours. It is important to an le the solar
panel to face the sun when the sun is at its
hi hest point. Ensure the solar panel is not
shaded by trees, shrubs or buildin s.

3
11. Connect the Pump to the back side of the Solar
Panel. IMPORTANT!! Sli htly twist the connectors
when connectin to make sure the rubber seals
are fully in the rooves.
12. SOLAR PUMP UNCTIONS
This pump runs from direct sunli ht. The pumps
performance is directly related to the amount
and stren th of sunli ht received by the solar
panel. This solar pump is desi ned primarily to
operate in summer months but can also work in
sprin and autumn if there is direct sunli ht.
Notes: This model DOES NOT come with a
battery, so the pump will only work when the
solar panel is in sunli ht. Please visit
www.allsolarcentral.com for additional solar
water pump kits.
13. PUMP MAINTENANCE
If you find the pump starts losin power or stops
workin , please clean the pump filter and
impeller with clean water.
14. TROUBLE SHOOTING
•Check to see if the solar panel, pump and
led li ht are connected properly
•Check to see if the solar panel is correctly
positioned facin the sun. Please ensure
the solar panel is not in the shade or
obstructed by trees, shrubs or a buildin
(see step 2).
•Check water level and make sure the
pump is fully submer ed in water
•Check to see if the pump filter/impeller is
blocked by debris
•Check to see if the fountain tubin is
blocked by kinks or obstructions
•Check the pump. It may be “air locked”.
Turn the pump on/off switch several
times to clear any air that may have been
trapped.
15. WINTER PROTECTION
Indoor stora e is recommended durin winter
months. Normal operatin temperature is
between 50 and 113 °F.
Please visit www.allsolarcentral.com for more
products and offers.