2, remote control other requirements
1) Matching function requirements: There must be no problem of scanning the Bluetooth device or not
matching (including pressing the pairing button continuously for a short time), please verify 50 times to ensure
no problem;
2) Reconnection function requirements: There must be no problems with the connection failure, including the
power failure of the box, the remote control power failure, and the static connection for 2 hours. Please verify
50 times to ensure no problem;
3) Anti-interference function requirements: There must be no problem that affects the throughput of the host
WIFI. Please ensure that the WIFI throughput of the host is normal when the remote controller is connected.
4) Performance requirements: Requires support ≤10m, there must be no problems with voice calls, loss, and
button presses, lost codes or keys on the remote control;
5) Power consumption requirements: The remote control can be used for at least 6 months.
Voice: 16Khz voice sample with 16-bit sampling, press the voice button (color button) to start recording. The
remote controller stops recording after receiving the stop recording command from the voice engine.
The box software can control the MIC to be turned on and off.
Support remote control MIC and other MIC (such as the recording button on the phone apk) alternate,
switch voice input.
FCC Compliance statement
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful Interference
in residential installations. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that a particular disturbance will not occur. If this equipment
does cause harmful interference to radio or television reception, this can be determined by turning the
equipment off and on. Encourage the user to attempt to correct the interference by one or more of the
following:
• Readjust or place the receiving antenna.
• Increase the distance between the device and the receiver.
•Connect the device to a socket on a different circuit than the receiver.
•Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. The operation meets the following two conditions:
1）This device does not cause harmful interference.
2）This device must accept any interference received, including undesired operation that may cause
interference.
Any changes or modifications not expressly approved by the party responsible for compliance may void the
user's authority to operate the equipment.
