Aspen ASPA-400 User manual

Company Name：ASPEN APPLIANCEINC
Website： www.theaspen.com
Address：XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Manual of ASPA-400 Air Purifier
Please read this manual carefully before use and keep it for reference in the future.
Thank you very much for your choice.

Packing List
Technical Specifications
Safety Precautions
Product Components
Operating Instructions
Product Features
Instructions for use
Table of Contents
1
1
2
3
4
5
6-7
Cleaning and Maintenance
FAQ & Solutions
Warranty
8
9
10

21
Safety Precautions
Packing List
ASPA-400 host 1 set
Composite filter 1 piece (installed into the machine)
Power cord 1 piece
Manual 1 piece
ASPA-400
120V~ /60Hz
60W
233CFM
55dB
382x200x645mm
8.4kg
6.3kg
475x285x760mm
CADR (particulate matter)
Noise
Net weight
Gross weight
Product size
Package size
Model
Rated voltage/frequency
Rated power
0.85A
Rated current
Product specifications
Prohibitory sign
Warning sign
Attention sign
The behaviors with this sign must be prohibited, otherwise it may cause product damage or endanger
the user’s personal safety.
The behaviors with this sign must be operated in strict accordance with the requirements, otherwise it
may cause product damage or endanger the user’s personal safety.
The behaviors with this sign must be paid attention to, otherwise it may cause product damage or other
losses due to improper operation.
Please do not block the air inlet/outlet.
Please do not use the machine in any place with
much oil fume or high humidity.
Please regularly clean the machine and power
plug.
Please do not touch the power plug with wet
hands.
Please do not rinse the high-efficiency composite
filter with water.
Only the 120V power sockets are 120V power
sockets.
Please do not put it close to or on any heat
source (such as a fireplace, stove or a place
with flammable gases).
Please be careful when cleaning the air purifier,
as corrosive detergents may damage the surface.
Please do not unplug the power cord from the
power socket when cleaning the air purifier or
leaving it unused. Otherwise, it may cause
electric shock due to poor insulation or fire due
to short circuit.
Packing List
Technical Specifications
The following safety precautions and instructions must be read carefully and
observed when the product is used!
This machine shall not be used by people with
disabilities, perceptual disturbance or dysgnosia
or children alone, unless they use it under the
supervision and guidance of safety director on
the site.
0-12
13-35
36-55
＞55
Sleep gear
PM2.5 value Air quality
Excellent
Good
Medium
Poor
Green
Blue
Yellow
Red
PM2.5 air quality
indicator
Wind speed
gear
Work environment Temperature:14°F-104°F(-10℃-40℃) humidity:≤95%RH
Real-time display of air quality conditions

Filter cover
Composite filter
1
2
Host
3
Touch control button and
air quality indicator light
4
1
2
3
4
3
4
The power button turns white in the power-on state and red in the standby state.
In the intelligent mode, the colors and gears of the PM2.5 air quality indicator light
will change with the PM2.5 concentration values (please refer to the table on the
first page for the corresponding colors and gears).
The PM2.5 air quality indicator light is on for one section in the manual mode Gear 1.
The color changes with the PM2.5 concentration values (please refer to the table on
the first page for the corresponding colors and gears).
The PM2.5 air quality indicator light is on for two section in the manual mode Gear 1.
The color changes with the PM2.5 concentration values (please refer to the table on
the first page for the corresponding colors and gears).
The PM2.5 air quality indicator light is on for three section in the manual mode Gear
1. The color changes with the PM2.5 concentration values (please refer to the table
on the first page for the corresponding colors and gears).
a. The display and reset of filter service life can only be operated on the APP.
b. The indicator light of the power key is flashing in red continuously when the filter
reaches the end of its service life, until the user replaces and resets the filter on the
APP. (Note: When the filter is reset on the APP, the power button still has other
functions such as startup & shutdown and shifting gears normally, but the indicator
light keeps flashing in red.)
a. The machine is powered on for the first time in a standby state after leaving the
factory. At the same time, Wi-Fi starts to match the network, waiting for the mobile
phone to connect. The key indicator light flashes in red and blue alternately (1HZ).
(Note: The machine enters the state of network matching only when it’s powered
on for the first time).
b. In the running/standby state, press and hold the power key for more than 10
seconds and loosen it after hearing the sound of “ding-ding-ding”. At this moment,
it enters the Wi-Fi network matching mode, and the indicator light (RGB LED)
flashing in blue and red alternately indicates the network matching state. The light
flashes in blue when the network is successfully matched, which returns to the
previous running indication state after 5 seconds. If it fails to match the network
within 120 seconds, the light flashes in red for 5 seconds and returns to the
previous running indication state. The machine can still be powered on/ shut
down in the process of network matching.
Structure and name of product components
Product Components Operating Instructions
Standby/shutdown
Intelligent mode
Manual mode
(gear 1)
Manual mode
(gear 2)
Manual mode
(gear 3)
Functions Key state Meanings
Reset of filter
service life
WIFI connection
Standby/shutdown Intelligent Manual (gear 1) Manual (gear 2) Manual (gear 3)
The switching sequence of corresponding gears:
The sleep mode can only be set on the APP. In the sleep mode, the motor runs in
the sleep gear, and the air quality indicator light and the power indicator light are
off.
Sleep mode

Product Features
5
6
Integration of multiple functions
Efficiently purify PM2.5, smoke, pollen and other particulate pollutants
3 gears of wind speed
Timing (operated on the APP)
Prompt for replacement the filter (operated on the APP)
Configured with three operating modes, namely, manual, intelligent and
sleep
Wi-Fi connection
Monitoring of PM2.5 concentration; display of air quality through different
colors of the LED light (the concentration value can be checked on the
APP in real time)
All filters are attached in the air purifier.
Please ensure that the plastic protecting bag outside the filter is
removed and installed correctly before use.
Take out the filter cover when it pops up.
Take out the filter inside the machine.
Instructions for use
Precautions for
use
Open the filter cover according to the marking
keys on the product.
Remove the plastic protecting bag on the filter.
3重净化技术Threefold purification technology
Initial efficiency
filter
Carbon spraying
Sponge
HEPA filter
[Note] The carbon sprayed sponge, HEPA filter and initial efficiency filter are combined in the same filter mesh.
HEPA filte Efficiently filter out particles as small as 0.3 micron, such as PM2.5, smoke,
pollen, dust and other pollutants.
Intercept hair, fibrous wool, large particles and dander, etc. It can be cleaned
regularly with a vacuum cleaner.
Initial efficiency
filter
Carbon sprayed
Sponge
The high-quality modified activated carbon sprayed into the sponge can
absorb the organic pollutants in the air.

Start to use
⑤Put the filter without bag back into the machine.
7
8
Instructions for use
Cleaning and Maintenance
Cleaning and Maintenance
⑥Put the filter cover back
Please unplug the power plug from the power socket before machine maintenance.
1、Clean the machine body:
1）Wipe off stains with a soft rag.
2）Wipe off stubborn stains with a soft rag dipped with proper amount of neutral detergent.
Note: Please avoid scratching the machine shell with any hard object during maintenance. Please operate
according to the manual and avoid damaging any machine part during base disassembly.
2、Clean and replace the filter:
1）The replacement of filter will be reminded by the built-in program. The filter mesh can also be replaced
according to the service life prompt of filter. It can also be replaced in real time through the filter life reset
function.
2）The vacuum cleaner can be used to clean the deposited dust on the surface of the composite filter to
prolong the service life of filter mesh (it is recommended to clean it once every other month and do not
wash with water).
*The service life of filter may vary with different environments for using the machine. For example, it will be
shortened in smoking areas and areas with pets. Please replace the filter in time when the purification effect
becomes worse.
*Please dispose the used waste filter according to the relevant regulations on solid waste.
1. Insert the power plug into the 120V power socket; the machine is powered on, and the
buzzer makes a “ding” sound.
2. Power on by touching the power key.

9
10
FAQ & Solutions
Failures Possible Causes Solutions
The product cannot
function normally
The air cannot be ducted
smoothly from the air outlet
The machine makes noise
while functioning
The most frequently asked questions of this product are listed here. If you cannot find the solution to your question, please
contact our after-sales service department.
1.There are problems in connection.
2.The filter cover is not properly installed.
1.The plastic package of the new filter is
not removed.
2. The air outlet of purifier is blocked by
foreign matters.
1.Check if the plug is plugged into the
socket and if the power button is turned
on.
2.Reinstall the filter cover.
1.The inlet or outlet is blocked by foreign
matters.
2.There are foreign matters in the air flue
of machine.
1. Please remove the plastic package
at first.
2. Clean up the foreign matters.
1.Please remove the plastic package
first.
2.Clean up the foreign matters.
Warranty
Warranty Card
Customer Name
Place of Purchase
Product Name
Batch No
Maintenance Date
Thank you for purchasing and using this product. You can enjoy the following after-sales warranty
services with this card as long as you have purchased this product in any authorized shop or online
store.
Phone number
Date of Purchase
Product Model
Maintenance Records Remarks
You can unconditionally return/exchange the product in case of any quality problem within 7 days of purchase.
The product is purchased in any unauthorized shop or online store.
The product is purchased in any authorized shop or online store, but without a warranty card.
There is any damage caused by force majeure, such as natural disasters.
There is any artificial damage or arbitrary disassembly due to improper use, repair and maintenance beyond
the manual.
The warranty card is filled in incompletely or altered and the contents on the card are inconsistent with the
actual product.
You can request for maintenance for free (the filter mesh is covered by warranty) in case of any quality problem
within 1 year from the date of purchase.
Statement: The after-sales warranty will not be provided for the following circumstances.

FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:？(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception,which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be
installed and operated with minimum distance between 20cm the radiator your body: Use
only the supplied antenna.
FCC ID: 2A6AP-ASPA-400