ASROCK Rack E3C236D4HM-2L+ User manual

E3C236D4HM-2L+ / E3C236D4HM-2T
Quick Installation Guide
www.asrockrack.com
15.14cm (5.96 in)
33.02cm (13 in)
1
2
VGA1
USB 3.0
T: USB2
B: USB1
LAN2
PCIE7
1
CMOS
Battery
RoHS
E3C236D4HM-2T
Intel
C236
DDR4_B2 (64 bit, 288-pin module, Blue) DDR4_B1 (64 bit, 288-pin module, White) DDR4_A2 (64 bit, 288-pin module, Blue) DDR4_A1 (64 bit, 288-pin module, White)
MEZZ1
LAN1
IPMI_
LAN1
BMC
ROM
14
19
18
BMC_SMB_1
1
1
SATA_SGPIO1
TPM1
1
PSU_SMB1
1
IPMB1
HDLED RESET
PLED PWRBTN
PANEL1
PMBUS_SEL_CLK1
PMBUS_SEL_DAT1
PMBUS_SEL_ALT1
PECI1
UID
AUX_PANEL1
1
1
1
NMI_BTN1
USB3_5
CPU_FAN1
3
4
5
6
7
8
9
10
11
12
17
Ct1
Ct2Ct3Ct4
M2_1
11
CHASSIS_ID1
ME_RECOVERY1
ATXPWR1
USB_1_2
1
11
11
11
11
1
1
1
1
COM1
1
1
SATA_PWR1
11
SPEAKER1
11
1
1
PEG_CFG1
REAR_FAN1
ATX12V1
FRNT_FAN2
FRNT_FAN1
SATAPWR1
BIOS
ROM
USB3_3_4
SEC_OR1
SATA_SGPIO2
CHASSIS_ID2
CHASSIS_ID3
T 1
R
SATA_6
SATA_4
SATA_2
SATA_0
SATA_7
SATA_5
SATA_3
SATA_1
Super
I/O
16
20
42
43
44
39
40
41
33
34
35
36
37
38
45
46
21222324252627282930
31
32
13
15
BMC
Intel
LAN
X540
E3C236D4HM-2L+
No. Description No. Description
1 USB 3.0 Ports (USB3_1_2) 4 LAN RJ-45 Port (IPMI_LAN)
2 UID Switch (UID1) 5 1G LAN RJ-45 Port (LAN1)
3VGA Port (VGA1) 6 1G LAN RJ-45 Port (LAN2)
E3C236D4HM-2T
No. Description No. Description
1 USB 3.0 Ports (USB3_1_2) 4 LAN RJ-45 Port (IPMI_LAN)
2 UID Switch (UID1) 5 10G LAN RJ-45 Port (LAN1)
3VGA Port (VGA1) 6 10G LAN RJ-45 Port (LAN2)
4
2
P/N: 15G065089100AK V1.0
Install the Server Board
Motherboard Layout
Jumper Cap On/O
The server board User's Manual is available for download from the ASRock Rack's ofcial website
at http://www.asrockrack.com.
Take note of the following precautions before you install server board components or change any
server board settings.
1. Unplug the power cord from the wall socket before touching any components.
2. To avoid damaging the server board’s components due to static electricity, NEVER place your
server board directly on the carpet or the like. Also remember to use a grounded wrist strap or
touch a safety grounded object before you handle the components.
3. Hold components by the edges and do not touch the ICs.
4. Whenever you uninstall any component, place it on a grounded anti-static pad or in the bag
that comes with the component.
5. When placing screws into the screw holes to secure the server board to the chassis, please do
not over-tighten the screws! Doing so may damage the server board.
1
1Insert the server board into the chassis.
2Af fi x the screws clockw ise into the
mounting holes in all of the corners of
the server board.
Do not over-tighten the screws
When the jumper cap is placed on the pins, the
jumper is “Short”. If no jumper cap is placed on the
pins, the jumper is “Open”.
The illustration shows a 3-pin jumper whose pin1
and pin2 are “Short” when a jumper cap is placed on
these 2 pins.
I/O Panel
System Panel Header
Auxiliary Panel Header
5Headers
GND
RESET#
PWRBTN#
PLED-
PLED+
GND
HDLED-
HDLED+
1
GND
Note:
E 3 C 2 3 6 D 4 H M - 2 T:
Intel X540
E3C236D4HM-2L+:
Intel I350
(See Note)
No. Description
1 SATA SGPIO Connector (SATA_SGPIO1)
2M.2 Socket (M2_1) (Supports type
2230/2242/2260/2280 M.2 module)*
3 SATA SGPIO Connector (SATA_SGPIO2)
4 COM Port Header (COM1)
5TPM Header (TPM1)
6PMBUS Mode Jumper (PMBUS_SEL_DAT1)
7PMBUS Mode Jumper (PMBUS_SEL_CLK1)
8 Vertical Type A USB 3.0 (USB3_5)
9PMBUS Mode Jumper (PMBUS_SEL_ALT1)
10 PSU SMBus (PSU_SMB1)
11 Chassis ID1 Jumper (CHASSIS_ID1)
12 BMC SMBus Header (BMC_SMB1)
13 CPU PECI Mode Selection Jumper (PECI1)
14 ME Recovery Jumper (ME_RECOVERY1)
15 PCI Express Graphics Conguration Jumper
(PEG_CFG1)
16 Intelligent Platform Management Bus Header
(IPMB1)
17 Rear Fan Connector (REAR_FAN1)
18 CPU Fan Connector (CPU_FAN1)
19 ATX Power Connector (ATXPWR1)
20 ATX 12V Power Connector (ATX12V1)
21 Chassis ID2 Jumper (CHASSIS_ID2)
22 Chassis ID3 Jumper (CHASSIS_ID3)
23 ermal Sensor Header (TR1)
No. Description
24 Descriptor Security Override Jumper
(SEC_OR1)
25 Speaker Header (SPEAKER1)
26 Front Fan Connector (FRNT_FAN2)
27 Front Fan Connector (FRNT_FAN1)
28 Non Maskable Interrupt Button (NMI_BTN1)
29 System Panel Header (PANEL1)
30 Auxiliary Panel Header (AUX_PANEL1)
31 2 x 288-pin DDR4 DIMM Slots
(DDR4_A1, DDR4_B1, White)
32 2 x 288-pin DDR4 DIMM Slots
(DDR4_A2, DDR4_B2, Blue)
33 SATA DOM Power Header (SATA_PWR1)
34 SATA3 Connector (SATA_7)
35 SATA3 Connector (SATA_5)
36 SATA3 Connector (SATA_3)
37 SATA3 Connector (SATA_1)
38 USB 2.0 Header (USB_1_2)
39 SATA DOM Power Jumper (SATAPWR1)
40 USB 3.0 Header (USB3_3_4)
41 SATA3 DOM Connector (SATA_0), Red*
42 SATA3 Connector (SATA_2)
43 SATA3 Connector (SATA_4)
44 SATA3 Connector (SATA_6)
45 PCI Express 3.0 x16 Slot (PCIE7)**
46 SAS Mezzanine Card Slot (MEZZ1)**
*e M.2 slot (M2_1) is shared with the SATA connector (SATA_0). When M2_1 is populated with a M.2 SATA module, SATA_0 is disabled.
**e mezzanine card slot (MEZZ1) is shared with the PCIE7 slot. When MEZZ1 is populated with a storage mazzanine card, PCIE7 will operate at
up to x8 mode.
4
3
2
165
GND
SMB_CLK
SMB_Alert
CASEOPEN
1
SMB_DATA
+3VSB
LAN1_LINK
LED_PWR
LAN2_LINK
LED_PWR
+5VSB
GND
GND
LOCATORLED1+
LOCATORLED1-
LOCATORBTN#
System Fault LED-
AB
CD
System Fault LED+
E
*15G065089100AK*
3

E3C236D4HM-2L+ / E3C236D4HM-2T
Quick Installation Guide
www.asrockrack.com
Activity / Link LED Speed LED
Status Description Status Description
O No Link O 10M bps connection or no
link
Blinking Green Data Activity Yel low 100M bps connection
On Link Green 1Gbps connection
1G for E3C236D4HM-2L+ (LAN by Intel®I350)
Activity / Link LED Speed LED
Status Description Status Description
O No Link O 10Mbps connection or
no link
Blinking Yellow Data Activity O 100Mbps connection
On Link Green 1Gbps connection
10G for E3C236D4HM-2T (LAN by Intel®X540)
Activity / Link LED Speed LED
Status Description Status Description
O No Link O 100Mbps connection or
no link
Blinking Yellow Data Activity O 1Gbps connection
On Link Green 10Gbps connection
9LAN Port LED Indications
ACT/LINK LED
SPEED LED
LAN Port
6
11
8
7Install the CPU Fan and Heatsink
Install the Memory
Install the Power Cables
123
Unlock a DIMM slot by
pressing the module clip
outward.
Insert the memory module. Lock the clip.
10 Install the PCIE Card
1Remove the bracket facing the slot that
you intend to use. Keep the screw for
later use.
2Al ign t he ca rd connector wit h the
slot and press firmly until the card is
completely seated on the slot.
Fasten the card to the chassis with the
screw.
3
IPMI LAN Port
LAN Port
Install the Processor
ACT/LINK LED
SPEED LED
LAN Port
M.2_SSD (NGFF) Module Installation
12
1
2
3
Find the corresponding nut location to be used.
Move the stando based on the module type and
length.
Peel o the yellow protective lm on the nut. Hand
tighten the stando into the desired location.
No. 1234
Nut Location A B C D
PCB Length 3cm 4.2cm 6cm 8cm
Module Type Type
2230
Type
2242
Type
2260
Type
2280
Align and gently insert the M.2 module into the
slot.
Tighten the screw with a screwdriver to secure
the module into place. Please do not overtighten
the screw.
3
2
4
BCD A
1
BCD A
BCD A
ABCD
NUT1NUT2D
4
5
123
Open the socket levers and the
CPU socket cover. Remove the
CPU protection cap.
Install the processor and close
the socket cover.
Close the socket levers.
CPU_FAN
12
Apply the thermal grease. Install the
CPU fan and heatsink and secure
the screws.
Connect the CPU fan to the CPU
FAN connector.
We recommend using the CPU Installation tool to avoid CPU pin-bent problem.
A
B
1
3V
3V
GND
GND
5V
5V
GND
PWROK_PS
5VSB
12V
12V
3V
3V
-12V
GND
PSON#
GND
GND
GND
5V
5V
5V
GND
N/A
12 24
13
48
15
+12V2
GND
Slot Generation Mechanical Electrical Source
PCIE 7 3.0 x16 x16 CPU
PCI Express Slot Conguration
*e mezzanine card slot (MEZZ1) is shared with the PCIE7 slot. When MEZZ1 is populated with a storage
mazzanine card, PCIE7 will operate at up to x8 mode.
MEZZ1 PCIE7
N/A x16
Populated with a storage mezaanine card x8