Asterion vertex ASTR-HEADSTAND-V1 User manual

PRODUCT MANUAL & SPECIFICATIONS
MODEL:ASTR-HEADSTAND-V1
ILLUMINATED HEADPHONE STAND
Compatible with most standard headphones*
*Maximum weight 1lb

STAND ASSEMBLY INSTRUCTIONS
STAND COMPONENTS
A
B
PLEASE NOTE: The clear portion is
covered with a frosted protective cling
lm on both sides, please remove lm
to reveal fully transparent acrylic.
ASSEMBLY: To assemble the VERTEX™ simply slide clear arm Ainto the matching
groove on base Buntil they are evenly aligned. Either side of base Bcan be used
to assemble the stand.
WEIGHT LIMIT:Placing
headphones heavier than 1lb
(450g) may cause excessive
stress and eventual fracture
of the clear acrylic arm.
1lb

OPERATING INSTRUCTIONS & GUIDELINES
BASE DIAGRAM
2. Touch sensitive LED
power+dimming button
3.
Touch sensitive color cycle button
4. USB A power
output
1. Micro USB power input
TOP DOWN VIEW
1. Once assembled, plug the supplied USB 2.0 Micro-B cable into the power input
located on the rear of the stand and the other end into a compatible 5V USB power source.
This includes most standard phone chargers and USB computer ports.*
* PLEASE NOTE: Only use a power source that meets the specications listed on the following page.
2. To activate, deactivate or adjust the LED brightness, repeatedly tap the LED power button.
3. To change the color mode of the LED lightly tap the color cycle button.
4. A USB power output is located on the right side of the device and is capable of charging
your headphones or any compatible USB devices.
PRODUCT FEATURES
RUniversally compatible with standard
headphone sizes
RCompact collapsible design
R3 Levels of adjustable brightness
R13 LED color options and 3 alternating
color modes
INCLUDED INSIDE THIS BOX
1. Illuminated headphone stand
(2 components)
• LED base with USB port
• Clear headphone arm
2. Micro-B USB cable
3. Product Manual

TECHNICAL SPECIFICATIONS
• Operating Temp: 0-40˚C
• Compatible Power Supply: 10W (5V 2A) AC USB adapter
• Input voltage: DC 5V
• Input current: 0.5A or More
• Input maximum current: 5A RMS Max
• Output maximum current: 5A RMS Max
IMPORTANT SAFETY INSTRUCTIONS (Please read carefully before use)
1. Never place a headset that weights more than 1lb (450g) onto the stand. The VERTEX™
transparent acrylic is extremely sturdy but overloading the weight may cause the arm to
stress at the joints and possibly fracture.
2. To prevent electrical shock, do not dismantle or remove any external screws. There are no
user serviceable parts inside. For assistance please visit: AsterionProducts.com.
3. The VERTEX™ is intended to only hold audio headphones. Unintended use or overloading
the unit may result in damaging the stand and the supported device.
4. Keep well ventilated and do not cover any portion of the device while charging.
5. Do not place near heat sources such as radiators and heaters, and do not use in
high temperature environments.
6. Keep this product dry and avoid any contact with damp or wet areas.
CAUTION
WEIGHT LIMIT: Do not place headphones heavier than
1lb (450g) may cause fracture of the acrylic arm.
©2020 LYRO, LLC. All Rights Reserved. All product names, logos and brands are property
of their respective owners. Photos and illustrations not binding. Contents, designs and
specications are subject to change without notice and may vary from one country to another.
All company, product and service names used on this packaging/manual are for identication
purposes only. Use of these names, logos and brands does not imply endorsement. The
Asterion Logo and VERTEX Logo are trademarks of LYRO, LLC.
SAFETY NOTICE: Please read the entire product manual before use. In no event shall LYRO, LLC be
liable for any direct, indirect, punitive, incidental, special consequential damages, to property or life,
whatsoever arising out of or connected with the use or misuse of this product.