Thrustmaster TX racing wheel User manual

-USER MANUAL
-MANUEL DE L’UTILISATEUR
-BENUTZERHANDBUCH
-HANDLEIDING
-MANUALE D’USO
-MANUAL DEL USUARIO
-MANUAL DO UTILIZADOR
-РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ
-ΕγχΕιριδιο χρήσήσ
-KULLANIM KILAvUZU
-INSTRUKCjA OBSłUGI

TECHNICAL SPECIFICATIONS
1 Racing wheel base 6 MODE button +
Red/Green indicator
2 Racing wheel light
3 2& Down) sequential gear shift levers (Up
4 Multidirectional D-Pad 7 Xbox Guide
button
5 Switch (3 positions) 8 White indicator
light 9 Large threaded hole (for attachment system
and tightening screw)

10 Attachment system
11 Metal fastening screw
12 Thrustmaster Quick Release
13 Controller pairing (for Kinect™
detection)
14 Mains supply connector (type A or B)
(Varies from one country to another)
15 Racing wheel USB cable and connector
16 Gearbox connector
(sold separately, forthcoming release)
17 Pedal set connector

Your racing wheel's power supply varies according to the country where you
purchased your device. The mains supply can be:
CONNECTING THE RACING WHEEL TO THE MAINS =
PLEASE READ
Internal, with:
Never connect the 220-240V cable
to a 100-130V power outlet!
Never connect this cable to a mains power
adapter!
* A power supply unit located directly inside the racing wheel's base, with a
type A connector
*A 220-240V mains power supply cable
= compatible only with a 220-240V electrical supply.

Internal, with: * A power supply unit located directly inside the racing wheel's
base, with a type A connector
Never connect the 100-125V cable
to a 220-240V power outlet!
Never connect this cable to a mains power
adapter!
*A 100-125V power supply cable
= compatible only
with a 100- 125V
electrical
supply.
IMPORTANT: if you do not know which voltage is
supplieda in the using your racing wheel, please refer to
your local electricity supplier.
rea in which you are
External, with:
* An external power supply unit located on the racing wheel's base, with a type B
connector
* A mains power supply cable
=
ltages, 110
compatible with all supply vo
-
240
V.

WARNINGS
Before you use this product, please read this documentation carefully and keep it safe
should you need to consult it later.
Warning –Electric shock
*Store the product in a dry location and do not expose it to dust or sunlight.
*Respect the connection direction.
*Do not twist or pull the connectors and cables.
*Do not spill any liquid on the product or its connectors.
*Do not short-circuit the product.
*Never dismantle the product; do not throw it onto a fire and do not expose it to high
temperatures.
*Do not use a power supply cable other than the one provided with your racing wheel.
*Do not use the mains power supply cable if the cable or the connectors are damaged, split
or broken. * Make sure that the mains power cable is properly inserted into the power outlet
and the connector located on the rear face of the racing wheel's base.
*Do not open. No user replaceable parts inside. Refer servicing to manufacturer, specified
agency or qualified technician.
*Only use attachments/accessories specified by the manufacturer.
*If the steering wheel is operating unusually (if it is emitting any abnormal sounds, heat or
odors), stop using it immediately, disconnect the power cable from the socket and
disconnect the other cables. * If you are not going to be using the steering wheel for an
extended period, disconnect the mains adaptor from the wall socket.
Air vents
Make sure that you do not block any of the air vents on the steering wheel base. For optimum
ventilation, respect the points below:
*Position the base at least 10 cm away from any wall surfaces.
*Do not place the base in any tight spaces.
*Do not cover the base.
*Do not let any dust build up on the air vents.
For safety reasons, never use the pedal set with
bare feet or while wearing only socks on your
feet.
THRUSTMASTER®DISCLAIMS ALL RESPONSIBILITY IN THE
EVENT OF
INJURY RESULTING FROM USE OF THE PEDAL SET
WITHOUT SHOES.

Warning –Injuries due to force feedback and repeated movements Playing
with a force-feedback steering wheel may cause muscle or joint pain. To avoid any
problems:
*Avoid lengthy gaming periods.
*Take 10 to 15 minute breaks after each hour of play.
*If you feel any fatigue or pain in your hands, wrists, arms, feet or legs, stop playing and
rest for a few hours before you start playing again.

Warning –Pedal set pinch hazard when playing
*Keep the pedal set out of children’s reach.
*When playing, never place your fingers on or anywhere near the sides of the pedals.
*When playing, never leave your fingers on or anywhere near the pedals' rear base. *
When playing, never place your fingers on or anywhere near the pedals' front base.
NEVER NEVER NEVER
Warning –Pedal set pinch hazard when not playing
* Store the pedal set in a safe place, and keep it out of children’s reach.

ATTACHING THE RACING WHEEL
Attaching the racing wheel to a table or a desktop
1. Place the racing wheel on a table or any other horizontal, flat and stable surface.
2. Insert the fastening screw (11) in the attachment system (10), then tighten the device by
turning the screw counterclockwise, so that it feeds into the large threaded hole (9)
located beneath the racing wheel, until the device is perfectly stable.
ALWAYS NEVER
WARNING: Never tighten the screw alone, without the attachment
system!
(This could damage the racing wheel).

ATTACHMENT /
REMOVAL
DIRECTION
To tighten:
Turn the screw
counterclockwise

To release:
Turn the screw
clockwise
Attaching the racing wheel's base to a cockpit
1. Place the racing wheel's base on the cockpit shelf.
2. Drive two M6 screws (not included) through the cockpit shelf, then feed them into the two
small threaded holes located beneath the racing wheel.
Important: The length of the M6 screws should not exceed the thickness of the shelf
+ 12 mm; longer screws could cause damage to internal components located in the
racing wheel's base.
3. If required, tighten the standard attachment system by inserting the fastening screw in the
large threaded hole.

XBOX ONE MAPPING
PC MAPPING
UPGRADING YOUR RACING WHEEL'S FIRMWARE
The firmware included in your racing wheel's base can be upgraded to a more recent version
featuring product enhancements.

To display the firmware version that your racing wheel is currentlyrunning and upgrade
it if required: on PC, connect to :// ts. Thrustmaster . com. In the Updates and
downloads section, click Xbox One / Wheels / TX Racing Wheel, then select Driver
/ Firmware and follow the instructions describing the download and setup procedure.
SETTING UP THE RACING WHEEL FOR THE XBOX ONE
1. Connect the pedal set to the connector (17) located atthe back of the racing wheel's
base.
2. Connect the power supply cable to the connector (14) located at the back of the
racing wheel's base.
3. Connect the power supply cable to a mains outlet with proper
voltage specifications.
For more information about this, please refer to the
CONNECTING THE RACING WHEEL TO THE MAINS section, on
page 3 in this manual.
4. Connect the racing wheel's USB connector (15) to one of the console's USB ports.
You are now ready to race!
AUTOMATIC RACING WHEEL AND PEDAL SET
CALIBRATION
The racing wheel automatically self-calibrates when you connect the racing wheel to
the mains and the racing wheel's USB connector to the console.
During this phase, the racing wheel will rotate quickly towards the left and the right,
covering a 900 degree angle, before stopping at the center.
WARNING:
Never touch the racing wheel during the self-calibration phase!
(This could cause an incorrect calibration and/or personal
injuries).
AUTOMATIC CALIBRATION OF THE PEDAL SET
Never connect the pedal set to the racing wheel's base (or disconnect it from the base)
when it is connected to the console or during gameplay (this could cause incorrect
calibration).
Always connect the pedal set before connecting the racing wheel to the console. Once
the racing wheel's calibration is done and the game has been launched, the
pedals are automatically calibrated after a few presses.

WARNING: Never press
the pedals
during the racing wheel's self-calibration phase or while a
game
is loading! (This could cause incorrect calibration)
If your racing wheel and pedal set do not operate correctly, or if calibration seems
incorrect: Turn off your console, disconnect your racing wheel entirely, reconnect all
cables (using the mains power supply cable and pedal set), then restart your console and
your game.

CONTROLLER PAIRING (13)

ACCELERATOR AND CLUTCH
PEDALS
Color of the MODE indicator
light (6)
NORMAL
RED
SWAPPED AROUND
GREEN
Other hints for the MODE button
To learn more about MODE button and indicator light, please visit ts.thrustmaster ;
in the Updates and downloads section, click Xbox One / Wheels / TX Racing Wheel,
then select Manual / Help file.
HELP FILES AND FAQS (not stated in this manual)
Please access ; in the Updates and downloads section, click Xbox One / Wheels / TX
Racing Wheel, then select Manual / Help file.

TECHNICAL FEATURES
1Metal support for conical stop 42.5 mm Allen key (included)
(not installed by default) 5Position adjustment nut for conical stop 2Conical stop
3Attachment screw for metal support