ASTi Sound+Sleep ASM1002 User manual

OWNER’SMANUAL
WRITE DOWN YOUR SERIAL NUMBER AND REGISTER
YOUR PRODUCT
Record your serial number here. You can find it on the bottom of the
product. You’ll need it when registering your product at
astisupport.com, and you should have it handy should you need to
contact our support team.
MODEL: ASM1002
Sound+Sleep Owner’s Manual
astisupport.com
TOOUR CUSTOMERS,
Thank you and congratulations on your purchase of a
Sound+Sleep from Adaptive Sound Technologies. The
Sound+Sleep line of products are, quite simply, the best sleep
sound machines available. They feature natural sounds recorded
by our own team of audio professionals. These sounds are used
to create multi-layered sound environments, which are non-
repeating and unique each time. With 30 dynamic sound
environments in 10 categories, you are certain to find the perfect
environment for rest, relaxation, or better sleep.
If you have any suggestions for how we can make our products
better, please let us know.
Sam J. Nicolino Jr., President and CEO, ASTI
Serial Number
Date of Purchase

GETTING STARTED
Inside the package you’ll find:
1. This Owner’s Manual
2. A Sound Environments Guide
3. A Sound+Sleep
4. An AC Power Adapter and Cable
!
Connect to an AC Outlet"
The power jack is located on the bottom of
the Sound+Sleep.
1. Push the power adapter plug at the end
of the cable into the jack.
2. Slip the cord under the rubber foot by
separating the two pieces of the foot
along the slit.
3. The machine should sit flat on a table or
nightstand if the cord is installed
correctly. The slit should easily separate
by running your finger down it. If not, you
can use a knife to cleanly open the slit.
Next, connect the AC plug into an un-
switched wall outlet. The first time you plug it
in, it may take up to 30 seconds to perform a
self-test. Please note that the ten painted
dots around the dial do not light up.
We recommend that you do not use an
outlet connected to a switch. Your
Sound+Sleep automatically remembers its settings each time it’s
turned offusing the POWER button, but it may not remember its
settings if it loses power.
You may use the Sound+Sleep internationally with any AC line
voltage from 100–240 Volts, at 50 or 60Hz, using an AC plug
adapter (available at many electronics and travel stores).$
Sound+Sleep Owner’s Manual
astisupport.com

USING YOUR SOUND+SLEEP THE FIRST TIME
Turn it on and select a sound"
Press the POWER button and the Sound+Sleep will initialize and
start playing in about two seconds. The Sound+Sleep may be
turned offwith the POWER button, or the TIMER button (see Sleep
Timer).
The Sound+Sleep will retain the last settings used when you last
powered it offusing the POWER button. If you power it offby
unplugging the Sound+Sleep power adapter from the wall outlet,
the settings may not be saved.
Next, use the dial to select a sound category, and then press the
RICHNESS button to choose between the three sound
environments in that category.$
See the included Sound Environments Guide, or the sound listings
later in this guide, for a complete list of sound environments.
Use the VOLUME buttons to adjust the volume to your liking.
Not all the sound environments are designed for sleep. Some
environments are designed for relaxation, speech privacy,
meditation, or studying and reading.
Adaptive Mode"
The Sound+Sleep can adapt to noise in your environment. It uses its
built-in microphone on the front panel to listen for disruptive
noises, and raises the volume and/or adds enhancing sounds to
the sound environment to compensate. Press the ADAPTIVE button
to turn it on or off. The lamp next to the ADAPTIVE button will
indicate when it’s active.
When Adaptive Mode is not active, your Sound+Sleep will maintain
a steady volume level.
Adaptive Mode allows the Sound+Sleep to be customized to suit
your personal preferences and situation. You might prefer a quiet,
steady sound, especially if there is little noise, or steady noise, in
your environment. Or, you might need the additional noise masking
that Adaptive Mode provides. Experiment to find the setting you
like best for different situations.
Note: When setting the volume in Adaptive Mode you are actually
setting the maximum volume it can reach when it detects a loud
noise. If the sound seems too low when it is quiet in your room, turn
the volume up to a higher base level.$
MORE USEFUL FEATURES
Sleep Timer"
The Sleep Timer can be used to set the Sound+Sleep to play for a
number of minutes and then shut offgradually and automatically.
The time interval can be set to 30, 60, 90, or 120 minutes by
pressing the TIMER button.
Sound+Sleep Owner’s Manual
astisupport.com

Turning offthe Sound+Sleep clears the Sleep Timer. Pressing the
TIMER button when the Sound+Sleep is offwill turn it on and set
the Sleep Timer to 30 minutes. Pressing the TIMER button again will
advance the timer to the next interval. After 120 minutes has been
selected, pressing the TIMER button again turns the timer off.
Headphone Jack"
A standard 3.5mm stereo headphone jack is
located on the side of the unit. Any ordinary set of
headphones or earbuds with a 3.5mm connector
may be used. Connecting headphones or earbuds
disables the Sound+Sleep’s built-in speaker, so it’s
a great way to enjoy private relaxation.
As with any product, use common sense when
using headphones. Avoid using them at high
volume levels. Prolonged exposure to loud volume
levels may impair your hearing.
Turning Off the Display
You may use the DISPLAY button to turn offthe front panel lamps if
they’re a distraction. If you adjust any settings while the display
lamps are off, they will turn on for 15 seconds and then dim again. If
you would like the front panel lights to stay on, press the DISPLAY
button once more.
Sound Environments
Use the dial to select a sound category, and then press the
selection button to choose an environment. Each sound category
has three environments from which to choose. See the sound
category list at the end of this guide.
Sound+Sleep Owner’s Manual
astisupport.com

TECHNICAL INFORMATION
Specifications"
To Restore Factory Settings"
This procedure will reset your Sound+Sleep to its original “out of the
box” settings.
1. Turn offthe Sound+Sleep
2. Press and hold the POWER button
3. Release the POWER button when the power lamp flashes once
Troubleshooting"
Visit astisupport.com for more assistance.
Sound Categories
10
Sound Environments
30
Speaker Compensation
Five-band parametric EQ
Headphone Jack
3.5mm stereo
Power Requirements
5 Volts, 500 mA DC max
Power Consumption While Off
< 0.25 Watts$
(typically 0.1 Watts)
Symptom
Possible Cause
Solution
No operation
when POWER
button is pressed
Disconnected power plug
Check the power connection on
the bottom of the unit and at the
wall outlet. Make sure that both
are firmly seated.
Unit is connected to a
switched wall outlet
Move the unit to an un-switched
outlet.
Faulty wall outlet
Move to a working outlet.
Product needs to be reset
See To Restore Factory
Settings
Unit is on, but no
sound is heard
Volume is set too low
Press or hold the VOLUME UP
button to increase volume
Headphones are plugged
in
Remove the headphones. The
speaker is muted when
headphones are connected.
Unit is on, but
volume is too low
Volume is set too low
Press or hold the VOLUME UP
button to increase volume
Adaptive Mode is enabled
In Adaptive Mode, the sound will
be low when there is no noise in
the room. If you prefer to
maintain the sound at high
volume, turn offAdaptive Mode.
Volume is Too
High
Press or hold the VOLUME
DOWN button to decrease the
volume
Other unexpected
behavior
See To Restore Factory
Settings
Sound+Sleep Owner’s Manual
astisupport.com

Safety, Warranty and Certifications"
Read and adhere to all safety and operating instructions before use.
Keep this booklet for future reference.
1. WARNING: Do Not Operate Heavy Machinery or Motor
Vehicles While Using this Device.
2. The unit should be cleaned regularly with a soft, dry cloth. The
grill may be vacuumed to remove excessive dust or particle
build-up. Do not use any liquids or sprays (including solvents,
chemicals or alcohol) or abrasives to clean.
3. The unit should not be used near water, such as a bathtub,
swimming pool, faucet or basin to avoid electrocution.
4. Be careful to avoid dropping objects or spilling liquids onto the
unit. If liquid is spilled on the unit, unplug and turn it upside
down immediately. Allow it to dry thoroughly (one week) before
plugging it into a wall outlet again. Following these instructions
does not ensure that the unit will be operational.
5. Do not reach for the unit if it has fallen into water. Unplug it
immediately at the wall outlet, and if at all possible drain water
before retrieving the unit.
6. The unit should be situated away from heat sources such as
radiators, heat registers, stoves or other appliances (including
amplifiers) that produce heat.
7. Avoid placing the unit in areas that are exposed to direct
sunlight or close to heat-radiating products such as electric
heaters. Do not place unit on top of stereo equipment that
radiates heat.
8. Avoid placing in areas that are dusty, humid, moist, lack
ventilation, or are subject to constant vibration.
9. The unit may be subject to interference from external sources
such as transformers, electric motors or other electronic
devices. To avoid distortion from such sources, place the unit as
far away from them as possible.
10. Do not apply excessive force when using any switches or
controls.
11. The unit should only be used with the power adapter provided
or AA batteries.
12. Power cords should be routed to avoid being walked on or
pinched by items placed on or against them.
13. Unplug the power adapter from the outlet when the unit is
unused for long periods of time or when moving the unit.
14. Do not attempt to service the unit yourself.
One Year Limited Warranty"
Adaptive Sound Technologies, Inc., hereinafter referred to as ASTI,
warrants this product against defects in materials and/or
workmanship under normal use for a period of ONE (1) YEAR from
the date of purchase by the original purchaser (“Warranty Period”). If
a defect arises and a valid claim is received within the Warranty
Period, at its option, ASTI will either 1) repair the defect at no
charge, using new or refurbished replacement parts, or 2) replace
the product with a current product that is close in functionality to
the original product. A replacement product or part, including a
user-installable part installed in accordance with instructions
provided by ASTI, is covered by the remaining warranty of the
original purchase.
When a product or part is exchanged, the replacement item
becomes your property and the replaced item becomes ASTI’s
property.
Obtaining Service: To obtain warranty service please call, or email
Adaptive Sound Technologies.
Sound+Sleep Owner’s Manual
astisupport.com

Limits and Exclusions: This Limited Warranty applies only to the
ASTI Sound+Sleep unit, ASTI power adapter, and ASTI power cable.
It does NOT apply to any bundled non-ASTI components or
products. This warranty does not apply to: a) damage caused by
failure to follow instructions relating to the product’s use or to the
installation of components; b) damage caused by accident, abuse,
misuse, fire, floods, earthquake or other external causes; c)
damage caused by service performed by anyone who is not a
representative of ASTI; d) accessories used in conjunction with a
covered product; e) a product or part that has been modified to
alter functionality or capability; f) items intended to be periodically
replaced by the purchaser during the normal life of the product
including, without limitation, batteries or light bulbs; or g) any and
all pre-existing conditions that occur prior to the effective date of
this Limited Warranty relating to any product sold “as is” including,
without limitation, floor demonstration models and refurbished
items.
ADAPTIVE SOUND TECHNOLOGIES, INC. SHALL NOT BE LIABLE
FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING
FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY
BREACH OF THIS WARRANTY. TO THE EXTENT PERMITTED BY
APPLICABLE LAW, ASTI DISCLAIMS ANY AND ALL STATUTORY OR
IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION,
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND WARRANTIES AGAINST HIDDEN OR
LATENT DEFECTS. IF ASTI CANNOT LAWFULLY DISCLAIM
STATUTORY OR IMPLIED WARRANTIES, THEN TO THE EXTENT
PERMITTED BY LAW, ALL SUCH WARRANTIES SHALL BE LIMITED
IN DURATION TO THE DURATION OF THIS EXPRESS WARRANTY.
Some geographic areas disallow the exclusion or limitation of
incidental or consequential damages or the length of an implied
warranty. As a consequence, some of the above exclusions or
limitations may not apply to buyers residing in those areas. This
warranty grants specific legal rights to buyers, but other rights may
also be granted, which vary from country to country, state to state,
etc.
FCC DECLARATION
This equipment has been tested and found to comply with the
limits for a Class B Digital Device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment offand on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment to an outlet on a circuit different from
the one to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for
help.
© Adaptive Sound Technologies, Inc. All Rights Reserved.
Sound+Sleep, Adaptive Sound, and the ASTI logo are trademarks of
Adaptive Sound Technologies, Inc. All other marks are trademarks
or registered trademarks of their respective owners. Use of this
product is protected by US patents #8,243,937, #8,379,870,
#8,280,068 and #8,280,067. Additional patents pending.
astisupport.com
Sound+Sleep Owner’s Manual
astisupport.com

SOUND SELECTION GUIDE
Use the sound selection dial to choose between the ten categories.
Then, use the RICHNESS button to select between three variations.
Sound+Sleep Owner’s Manual
astisupport.com