Asus Eee PC 900 User manual

TouchKit Setup
Reminder:
Be extremely careful when putting back on
the LCD hou ing; make ure the crew are
NOT tightened all the way down. Di continue action
immediately a oon a force i felt on the hou ing.
Further tightening of the crew will cau e touch
creen to crack re ulting in inaccurate cur or.
Package Content
Controller Board Preparation
Apply rubber adhe ive on the bottom ide of the controller board a
in ulation.

Eee PC 900 In tallation Guide
Step 1.
Remove all 6 screws for LCD housing.
Step 2.
Remove all 6 screws for bottom
housing.
Step 3.
Remove ke board b pushing in the 3
springs.

Step 4.
Remove both FPC for ke board and
touchpad in the direction indicated.
Step 5.
Remove all 9 screws for ke board
housing.
Step 6.
1. Use thin double-sided tape to secure the
touch screen panel on the metal frame
of the LCD module.
2. Remove both screws to detach LCD
module from the housing.

Step 7.
Detach the old connector to the
camera module and replace it Camera
Harness provided b the TouchKit.
Step 8.
Remove both screws on each side of
the LCD module to detach the LCD
brackets. This is to lower the LCD
module to accommodate the thickness
of the touch screen panel.
Remember to replace the LCD brackets
back to its’ original position in step 6.
Step 9. Touch Screen Alignment
Horizontal alignment (direction 1) use
the screw hole as reference point.
Vertical alignment (direction 2)
approximatel 1.5mm~2.0mm from the
bottom edge of the metal frame.

Step 10.
Place Shock Absorber Rubber on the
metal frame surrounding the touch
screen panel.
Step 11.
Remove camera connector.
Step 12.
1. Connector placement for touch screen
panel.
2. Camera port on the motherboard to USB
input on the controller (Hub Harness)
3. USB output to camera module (Camera
Harness)
4. USB output (optional expansion)
5. USB output (optional expansion)

Be extremely careful when putting back on the LCD hou ing; make ure the crew are NOT tightened all
the way down. Di continue action immediately a oon a force i felt on the hou ing. Further tightening
of the crew will cau e touch creen to crack re ulting in inaccurate cur or.