Asus LS201 User manual

English
LS201 Series
LCD Monitor
Quick Start Guide

2 Quick Start Guide
English
Safety information
• Before setting up the monitor, carefully read all the documentation that came
with the package.
• Topreventreorshockhazard,neverexposethemonitortorainormoisture.
• The monitor should be operated only from the type of power source indicated
on the label. If you are not sure of the type of power supplied to your home,
consult your dealer or local power company.
• Use the appropriate power plug which complies with your local power standard.
• To ensure satisfactory operation, use the monitor only with UL listed computers
whichhaveappropriateconguredreceptaclesmarkedbetween100-240VAC.
• Ifyouencountertechnicalproblemswiththemonitor,contactaqualiedservice
technician or your retailer.
Monitor introduction
Front view Rear view
1.SPLENDID™modehotkey
2.Decreasebutton
3.MENUbutton
4.Increasebutton/Brightnesshotkey
5.Powerbutton
6.VGAport
7.DVIport
8.DC-INport
Stand
Light In Motion
1
1234
4
44
4
5
6 7 8

3Quick Start Guide
English
2.1 Unfolding the monitor
The monitor is folded in the package. To unfold the monitor, hold the back cover
and press the Button with one hand, and carefully tilt the monitor forward with the
other hand until the Button rebounds with a click.
Button
-5º~20º
2.2 Connecting the cables
1. Connectthecablesasthefollowinginstructions:
• Toconnectthepoweradapter:rst,connecttheadaptercordsecurelytothe
monitor’sDC-inport.Then,connectthepowerplugtotheadapterportwiththe
other end to a power outlet.
• ToconnecttheVGA/DVIcable:
 a. PlugtheVGA/DVIconnectortotheLCDmonitor’sVGA/DVIport.
b. ConnecttheotherendoftheVGA/DVIcabletoyourcomputer’sVGA/
 DVIport.
c. TightenthetwoscrewstosecuretheVGA/DVIconnector.
2.3 Turning the monitor on
Gently press the power button .Seepage1-2forthelocationofthepower
buton. The power indicator lightsupinbluetoshowthatthemonitorisON.

4Quick Start Guide
English
2.3 Adjusting the monitor
• For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable for you.
• Hold the stand to prevent the monitor from falling when you change its angle.
• Youcanadjustthemonitor’sanglefrom-5ºto20º.
It is normal that the monitor slightly shakes while you adjust the the viewing
angle.
-5º~20º
2.4 Installing the monitor to a VESA wall
mount
ThefoldablestandoftheLS201LCDmonitorisspeciallydesignedforaVESAwall
mount.
ToinstallthemonitortoaVESAwallmount:
1. Havethefrontofthemonitorfacedownonatable.
2. Pressdownthebuttononthearmandfoldthestandtowardthebackofthe
monitor until the button rebounds with a click.
3. FixthemonitorontheVESAwallmountusingascrewdrivertofastenfour
screws into the four screw holes on the monitor stand.
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
Button Screw holes
VESA wall mount