ATA 8003 User manual
1
ata
Lat Pulldown
8003
ata
Lat Pulldown
Monteringsanvisning
2
Før du monterer dette apparatet er det noen få ting som er lurt å ha kjennskap til:
1. Vi er klar over at bobleplast rundt hele apparatet ikke er kjempegøy å fjerne eller kanskje vinner årets designpris,
men foreløpig er det den beste måten vi har funnet for å beskytte ditt apparat fra skader under transport.
2. Ditt apparat har vært montert i vår kvalitetskontroll. Det betyr at alt passer, selv om det noen ganger kan være litt
vanskelig eller føles som om ting ikke passer helt under selve monteringsprosessen. Det er viktig å huske på at du
ikke skal stramme alt med en gang du fester det - som regel strammer vi ikke før alt er på plass. Da vil du også
merke at monteringen blir enklere.
3. Riper og skader på rammen – dette har noen ganger skjedd selv om vi har brukt bobleplast, eller så kan det noen
ganger skje hos deg under oppakking og/eller monteringsprosess. Ikke fortvil! Vi har farge på lager som vi kan
sende til deg, slik at ripene kan skjules.
4. Monteringsråd:
a. det er lurt å bære alle delene dit du skal montere for å ikke måtte løfte alt flere ganger. Pakk delene ut og
lag deg en oversikt på alt du har og hvilke verktøy du kommer til å bruke. Et skrallesett kan vi garantere at
du må bruke!
b. Når du trenger å bruke hammer; bruk en gummihammer.
c. Sørg for å være minimum to personer i de tunge prosessene. Det er ikke anbefalt å la vekten av apparatet
henge i en bolt eller gjenge.
d. Vi pleier å bruke Boxjump (plyoboks) som «stige».
e. Godt humør og kjærlighet er anbefalt!
Ps. Dersom dere har flere apparater å montere, vil en stor del av jobben være å pakke alt opp, fjerne bobleplasten og legge
delene på riktig sted. Dette er altså oppgaver du kan be andre hjelpe deg med. Selv de som har null erfaring fra montering
vil raskt kunne gjøre klart for montering og en stor del av oppgaven vil allerede være unnagjort!
Lurer du på noe som helst eller trenger hjelp så er det bare å ta kontakt! Vi gjør vårt aller beste for å støtte opp. Tel. 66101400
eller på info@atatreningsutstyr.no
Dersom du ombestemmer deg og heller vil ha full monteringshjelp, kan du også kontakte oss. Vi har interne montører i
tillegg til at vi samarbeider med monteringsfirmaer i hele landet, slik at vi kan støtte opp med den hjelpen du trenger ved
behov.
3
CONTENTS
01/IMPORTANT NOTICE
02/ ASSEMBLY PROCEDURE AND BILL OF MATERIALS
03/PRODUCT DESCRIPTION
04/PRODUCT PARAMETER
05/MAINTENANCE GUIDELINE
06/TROUBLESHOOTING
07/WARRANTY INSTRUCTION
4
01/IMPORTANT NOTICE
Thank you for choosing our machine, proper use of the machine is important to keep you convenient and away
from danger. Please read the instruction before operating the machine:
1. Please read all user manuals before operating the machine and operate the machine according to the
instructions. Please keep the user manual until the machine is scrapped.
2. Keep users read and understand all cautions
3. Keep air fresh, flowing and enough motion space for users when operating the machine.
4. Keep the machine in good condition. Ensure all fixed parts are tightened without extra parts. Inspect the
parts easy to wear out regularly.
5. Please contact the dealer or after-sales department to change wear-out or defective parts. DO NOT operate
the machine when it out of use.
6. Please wear proper sports dress and gym shoes before operating it, DO NOT wear skirt, jewelry and tie up
the hair to avoid any possible dangers.
7. Do warm-up exercises before operating the machine.
8. Stop workout and ask your doctor when any abnormal symptoms occur such as headache, pain or emesis,
etc.
9. Children must exercise under the supervision of adults.
10. WARNING: Keep hands and feet away from moving parts.
11. WARNING: DO NOT beyond adjustable setting range.
12. WARNING: Keep baby or pets away from the machine when operating it.
13. WARNING: Keep all control apparatus in proper position.
14. WARNING: Please operate the machine in proper way, improper operating may not achieve workout
effect of the machine, and lead to damage to your health.
15. Operating the machine in controlled area is recommended.
5
02/ASSEMBLY
PROCEDURE
1）
Step1
Bill of materials
No.
Name
Specification
Qty
1
Outer hexagonal bolt
M12X20
8
2
Split washer
Ø12
8
3
Drum washer
Ø12.5
6
4
Flat washer
Ø12
2
5
Screw cap
Ø31*20.3
6
6
Rectangular tube plug
50X100XT3
1
7
Base assembly
1
8
Gantry
1
Finished diagram
6
2）
Step 2
Bill of materials
No.
Name
Specification
Qty
1
Outer hexagonal bolt
M12X20
6
2
Split washer
Ø12
6
3
Drum washer
Ø12.5
6
4
Screw cap
Ø31*20.3
6
9
Support assembly
1
Finished diagram
7
3）
Step 3
Bill of materials
No.
Name
Specification
Qty
2
Split washer
Ø12
2
3
Drum washer
Ø12.5
6
5
Screw cap
Ø31*20.3
6
10
Hexagon locknut
M12
4
11
Hexagon pan head bolt
M8X25
4
12
Split washer
Ø8
4
13
Flat washer
Ø8
4
14
Adjusting plate
320*40*T10
1
15
Leg limited assembly
1
16
Pin knob
Φ43*34*M8
1
17
Seat
460*230*60
1
18
Outer hexagonal bolt
M12X100
2
Finished diagram
8
4）
Step 4
Bill of materials
No.
Name
Specification
Qty
1
Outer hexagonal bolt
M12X20
6
2
Split washer
Ø12
6
3
Drum washer
Ø12.5
6
4
Screw cap
Ø31*20.3
6
19
High pulley front fixed
assembly
1
Finished diagram
9
5）
Step 5
Bill of materials
No.
Name
Specification
Qty
20
Hexagon pan head bolt
M10X25
2
21
Split washer
Ø10
2
22
Flat washer
Ø10
2
23
Hexagon cylinder bolt
M6X15
8
24
Split washer
Ø6
8
25
Flat washer
Ø6
8
26
Hexagon pan head bolt
M5X12
6
27
Hexagon cylinder bolt
M8X30
1
28
Hexagon locknut
M8
1
29
Safety board
621.4*1794*T2
1
30
Guide rod
￠20*1944
2
31
Hexagon pan head bolt
Φ30*33
2
32
Weight stack
100Kg
1
33
Pull assembly
1
34
Steel cable
Φ6*2360
1
35
Training flitch plate
415*174*T2
2
Finished diagram
10
11
6）
Step 6
Pulley installation instruction:
12
03/ PRODUCT DESCRIPTION
The machine is indoor fitness equipment, is suitable for aerobic exercise, mainly used to strength cardio-
pulmonary function, and train the muscles supplemented. By workout with the machine pectorals and other
muscles can be built up, achieve the purpose of bodybuilding and fitness.
The machine explains how to operate it properly and build up muscles by functional diagram, easy to learn.
User can adjust the resistance by weight stack easily.
The design and manufacture of the machine meets the human motion curve, the safety and durability are
guaranteed.
The design and manufacture of the machine meets the human motion curve and meets the standard of
GB17498.1-2008 and GB17498.2-2008, the safety and durability are guaranteed.
·Large size steel tube and electrostatic spraying guarantee the safety and durability.
04/ PRODUCT PARAMETER
Name
ata Lat Pulldown
Model
8003
Floor space
1000*1450*2200
Weight stack
100Kg
Net Weight
260Kg
Category
Commercial
05/ MAINTENANCE GUIDELINE
1. All the bolts and screws should be inspected regularly and keep tightened; rotating parts should be flexible
without abnormal sound.
2. The machine should be kept clean. Please DO NOT clean the machine with strong cleaning solvent.
3. Any worn or damaged stress parts should be repaired or changed immediately.
06/ TROUBLESHOOTING
Please contact support at 66101400 or [email protected]
07/ WARRANTY INSTRUCTION
1. Warranty scope
The machine is damaged by any non-impersonal factors under proper maintenance. The warranty card is valid
only when the user is original buyer.
2. The warranty period is one year since buying the machine.
3. The below-listed damages are out of warranty:
1). the damages caused by abuse, carelessness, accident or unauthorized modify.
2). the damages caused by improper adjusting weight stack pin.
3). the damages caused by improper maintenance.
4). the damages caused by other violation operating.
