Atdec APA-B User manual

APA-B Page 1 of 2
Installation Guide
APA-B
POS Base
COMPONENT CHECKLIST
REQUIRED TOOLS
A
Tilt Head
x 1
B
Base Plate
x 1
E
Mounting Pad
x 1
F
M6x6mm
Screw
x 1
G
Self-Tapping
Screw
x 4
H
4mm
Allen Key
x 1
C
Spacer
x 1
D
Plate Cover
x 1
Note: this product may require additional accessories, sold seperately.
Phillips Head
Screwdriver
BB
For Fixed Position
Select an install type and position Baccordingly
For 310Rotation
Customer
direction
Customer
direction
Note: Cables should
be routed before
mounting
Cable hole
Step 1: Choose Install Type

APA-B Page 2 of 2
Step 3: Cover Plate
Step 5: Install Locking Screw Step 6: Attach Accessory
Step 4: Mount Tilt Head
C
B
Ccan be placed to
90˚increments
around the mount
OR
F
Customer
Direction
Customer
Direction
sold
seperately
Use H to
adjust tilt
if required
Optional:
add spacer
if extra height
is desired
A
C
atdec.com
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. ©20180703B
Step 2: Mount Base Plate
B
E
B
G
a. Self-Tapping Screws b. Mounting Pad
Note: stick E
to Bbefore
mounting on
desk surface