atecpool 20204 RGB User manual

atecpool.com
OWNER’S
MANUAL
Lumina Mini Spa Panel Lighting
with niche and face-plate in ABS
“Adding light
to your life”
atecpool.com

Important
This manual includes essential information on the safety measures to be implemented for installation
and start-up. Therefore, the installer, as well as the user, must read these instructions before beginning
installation and start-up.
Lumina Mini Spa Panel Lighting
with niche and face-plate
in ABS RGB
Instructions for use
“Adding light to your life”
To be used with:
LED Modulator

atecpool.com
Standard input voltage: 12V AC/DC (Range: 12~18VAC or DC)
Standard input watt:
RGB 5W (45 Normal LED)
White 7W (45 Normal LED)
life span: 60,000 hours
16 programs with Synchronization capability using LED Modulator
Dimensions
Owner’s Manual > Lumina Mini Spa Panel Lighting in ABS
20204 RGB
Ø163mm
17mm
Ø59mm
102.4mm

atecpool.com
Owner’s Manual > Lumina Mini Spa LED Panel Lighting ABS
Packing Contents
The following items are included inside the box:
Lamp Assembly x 1
Plastic Nut x 1
Rubber Ring x 3
Instruction & Use
This is a high technology electronic controlled light based on LED’s in three colors: red, green
and blue. These three base colors together can produce many other colors to create the perfect
atmosphere in the pool. Any of the 16 pre-programmed eects can be selected with the on/
o switch of your pool lights. The LED’s can also be warm white only or natural white only. The
LED’s are driven by constant current. The technology of True PWM is adopted on the lights. High
temperature protection makes the LED’s be protected while the internal temperature reaches a
high level. All these technologies guarantee long working life of the LED lamps. The lights must
be used / operated while fully submerged underwater only.
•This lamp is designed to be ixed in new pools and/or pools with existing surface mounted
lamps that need replacement.
•This lamp is designed to be used only once. Should it become defective, repair is impossible,
and replacement is necessary.
•The manufacturer is not responsible in any circumstances for assembly, installation or start-
up of any electric components which have been inserted or handled at locations other than
its own premises.
16 Programs of RGB LED Bulbs
1. White: sun white
2. Red: one color red
3. Green: one color green
4. Blue: one color blue
5. Green-blue: ixed color green/blue
6. Red-green: ixed color red/green
7. Blue-red: ixed color blue-red
8. Evening sea: slow animation red/blue
9. Evening rivers: slow animation red/green

atecpool.com
10. Riviera: slow animation green/blue
11. White: neutral white
12. Rainbow: slow animation blue/red/green
13. River of colors: program 12, followed by program 15
14. Disco: fast animation
15. Four seasons: slow animation in red/blue/green/violet
16. Party: fast animation
Installation
All lamps should be placed on the wall of the pool below the water surface, in areas that are
easily accessible from the upper edge of the pool.
•All lamps should be installed on the same transformer and switch.
•The lights can be installed for both concrete pools and iber pools.
•The lights it into standard pool 2’’ ittings.
•The lamp is supplied with cable of 2m, 4m, 6m, 10m, 16m or 20m according to the need
of the user, making it possible to install multiple lamps connected to a single junction box.
The light can be ixed on concrete or stone wall pools, thin wall pools, iberglass wall pools,
metal wall pools, or wooden wall pools with liner. It can be threaded into the 2’’ female-thread
conduit/pipe
Owner’s Manual > Lumina Mini Spa LED Panel Lighting ABS

atecpool.com
Owner’s Manual > Lumina Mini Spa LED Panel Lighting ABS
The below drawing shows how to connect the cable from
the lamp to the power source
POOL WALL

atecpool.com
Maintenance & Replacement
There is no maintenance required for this lamp – it is designed to be used only once, meaning
that replacement is necessary if it becomes defective (repairing is impossible). Before any
handling, ensure that there is NO voltage supplied to the lamp. To replace, unfasten the lamp
from the bracket. Ensure the new lamp is of the same model and characteristics as the one
being replaced.
Start-up
sThe lamp should only be operated underwater while secured to the vertical walls of the pool.
Never switch on the lamp if it is not submerged underwater.
s
s
turned on again.
s
sAlternatively, we recommend using our optional controller (with in-built safety transformer)
which comes with (a) remote control for easy operation and (b) auxiliary connection of 24V
for operation of any other electrical item.
Safety Warnings
this type of work.
sAvoid making contact with the electric voltage.
sComply with the current standards regarding accident prevention.
s
SWIMMING POOLS.
sReplacement must be performed with the lamp disconnected from the electric
power system.
sDo not handle any electrical components with wet feet.
switching

atecpool.com
Warranty
The manufacturer warrants this LED underwater lights against defects in materials and
workmanship for a period of one year from the date of purchase. This warranty does not
consequential damages.

Contact us
“Adding light
to your life”
atecpool.com
For more product
information:
ATECPOOL INTERNACIONAL ESPAÑA
World Trade Center Edificio Sur
2ª Planta - Muelle de Barcelona
E08039 Barcelona, Spain
Tel. + 34 93 3443358
Email: [e-mail]
Head Oice
Spain
A-TECHNOLOGIES SWEDEN AB
Frillesaasvaegen 83
S439 62 Frillesaas. Sweden
Tel. + 46 703 655 630
Email: [email protected]
Sweden
A-TECHNOLOGIES FZCO
Jebel Ali Free Zone
P.O.Box: 18400 Dubai
United Arab Emirates
Tel.+ 971 4 8860880
Fax: + 971 4 8860881
Email: [e-mail]
United Arab
Emirates
A-TECHNOLOGIES AUSTRALIA
20 Mercantile Crt.
Molendinar, Qld 4214
P.O. Box: 638, Ashmore City
Tel. + 61 7 55 949111
Fax: + 61 7 55 949266
Email: [email protected]
Australia
A-TECHNOLOGIES INDIA
613A, 6th Floor Ansal Chamber - II
Bhikaji Came Place, New Delhi
110066, India
Tel. + 91 11 26195948
Email: [e-mail]
India
join us