ATG Electronics UFO User manual

Page 1of 2
www.atgelectronics.com Toll free: 877-461-5333 E-mail: [e-mail]
ATG Electronics® UFO LED Highbay
USER GUIDE
NOTE
Please read this entire manual to fully understand and safely use this product.
Specifications are subject to change without notice. Please visit www.atgelectronics.com for the most
recent user guide versions.
INCLUDED IN THIS BOX
ATG Electronics® UFO LED Highbay, 1 PCs
User Guide, 1 Set
UNPACKING
1) Unpack and carefully examine the product.
2) Report any damage and save all packing materials if any part(s) were damaged during shipping.
3) Do not attempt to use this apparatus if it is damaged.
INSTALLATION INSTRUCTIONS
1) CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT
CONDUCTOR.
2) The product should be installed and operated by a qualified electrician or technician in accordance
with relevant local codes.
3) Risk of electric shock. Ensure that main power source is off when wiring or soldering the sections of
the product.
MAINTENANCE
1) Disconnect the product from the power supply prior to cleaning.
2) Use a dry or slightly moistened cloth for cleaning.
REV1.0

Page 2of 2
www.atgelectronics.com Toll free: 877-461-5333 E-mail: [e-mail]
INSTALLATION STEPS
1. Attach the housing (optional) to the highbay 2. Tightly fix the housing on the highbay with screws.
body.
Aluminum Shroud is available at an extra charge.
3. Screw the hanging ring to the highbay 4. Securely hang up the highbay to the hook from
and lock it with screw.（Make sure the the ceiling.
hanging ring is properly tightened.）
5. Connect input and ground wires of the highbay to the main power outlet.