REMOTE WONDER™ PLUS
Installation and User Guide
.
System Requirements
Install your REMOTE WONDER™ PLUS
1
Open the battery container on the back of the REMOTE WONDER™ PLUS, and
then insert two AAA batteries.
2
Insert the included ATI Installation CD into your CD-ROM drive.
3
Click the REMOTE WONDER™ icon on the ATI CD Install screen. Follow the
on-screen instructions, and then allow the computer to restart.
4
Plug the remote receiver into any available USB port on your computer. The
REMOTE WONDER™ PLUS icon will appear on the Windows taskbar.
The REMOTE WONDER™ PLUS range depends upon the environment. For best
results, the receiver should be placed as far as possible from the computer’s case and
monitor.
Product Registration
To receive Customer Service you must register your product with ATI within 30 days of
purchase. An Online Product Warranty Registration form is available at:
ati.com/online/registration
Warranty Service
For warranty information, limitations and service instructions visit:
ati.com/online/warranty or contact one of our Customer Service Representatives using
one of the aforementioned means
Hardware • Intel® Pentium® 4 or equivalent with USB port.
• CD-ROM drive (for installation software).
Operating System • Windows® XP (Home or Pro).
