Atlona AT-CW-41 User manual

Step 3:
At the same time, please beam your IR remote controller to the IR receiving
window of AT-CW-41 and press any key for selecting channel 2, say number 3,
CH2 LED will be off.
Step 4:
Setting of CH3, CH4 is the same with previous procedure. When you finished all
the setting, then this switch box will switch to the channel that before this
IR-Learning mode..
*You can press LEARN key for aborting IR learns during learning
procedure.
During the learning process, each function key should be defined
within 8 seconds, if you are not setting the related key within 8 seconds.
You need to do it again with previous steps
Mechanical Operation
This box can be use manually, the LEARN key is used for mechanical switch. If
you want to change the input channel, you can only press the button once.
There will be a LED indication for what channel it is.
The procedure is a cyclic function
CH1->CH2->CH3-*CH4-i
r
Component
Video Audio and Digital Audio Selector
4 input 1 output
CORPORATION
For the best performance of this switch box, please read this manual carefully
and keep it for further information
Before you start:
*The component video has 2 different categories, please make sure that
component video of your input devices and your TV set are the same format.
*PCM audio is only workable in case that your audio processor or amplifier with
PCM(SPDIF) decoder.
Content of Package
• AT-CW-41
• AC-DC Adaptor
• Remote control

ILLUSTRATION
Front panel
COMPONENT VUV
Rear Panel
CONNECTION ILLUSTRATION
TV/Plasma/LCD
Display
AC Adapter spdif
XBOX
TM
DVD/Recorder
Satellite Receiver
2
Home Theater
OPERATION
This switch box is designed for 2 operational modes, you can use manual
application or IR Learning application.
Connection
Step 1. Connect the component video cable and Audio RL cable to your video
devices and AT-CW-41 (please make sure the connection between video
devices and AT-CW-41 is correct, the component video cable will equipped with
different color-coded, Red, Green, Blue. If the connection is wrong , you will
experience the distortion of picture or even loss of signal)
(If you want to connect your PCM Audio to this switch box, please follow stepi .1,
please be notified that you should have a PCM decoder)
Step 1.1: Connect PCM coaxial cable to PCM output of your video devices,
another end to this switch box. Take another coaxial cable connect from the
PCM output of AT-CW-41 to your amplifier, (sometimes, PCM is labeled by
SPDIF)
Step 2: Connect another component video cable from AT-CW-41 ;fo TV or Big
Screen Display. Connect Audio RL cable to your amplifier or TV.
Connect your PCM Audio from this switch box to your amplifier with PCM
decoder
Step 3: take the AC-DC Adaptor, plug the DC barrel connect to the DC Input of
AT-CW-41, plug the AC connector to the AC outlet. Please use only the AC-DC
Adaptor attached.
IR Learning Operation
Stepi:
Hold LEARN key on the front panel for more than 4 seconds. Then the led
indicator will flash(. At the same time, please release this key. Then this switch
box is under the IR R/C learning mode.
Step 2:
The CH1 LED indicator will flash, at the same time, please beam your IR remote
controller to the IR receiving window of AT-CW-41 and press any key for
selecting channel 1, say number 1, CH1 LED will be off. Then CH2 Led is
flashing
3