CONNECTING:
Rear of Amplifier:
1) Center output 6) Center In/Out
2) Rear Left output 7) Rear Left In/Out
3) Rear Right output 8) Rear Right In/Out
4) Front Left output 9) Front Left In/Out
5) Front Right output 10) Front Right In/Out
11) Power Plug (with fuse)
DETAILS OF FUNCTIONS:
Front of Amplifier:
7) Power indicator led
E.C. MARKING:
E.C. marking certified the conformity with low tension directive 73/23/CEE,
directive CEM 89/336/CEE and national transpositions.
2
ADVISES:
-To optimise the performances your amplifier, you should switch it on at least half
an hour before any listening, the time for power stage to reach their ideal working
temperature. Between two utilisation, it's better to use the stand-by position, so
that the power stages remains at their optimal temperatures.
-We advise you to use good wires to link with the other elements (Preamp.,
Loudspeakers…). Don't hesitate to take advises from your dealer.
-Your Amplifier is equipped with a temporised switch on. A relay protects
loudspeakers on output power stage from over-voltage.
GLOBAL CONNECTIONS:
Here is below an example of how to interconnect 1 multichannel preamp PR5.1, 1
AV500 and 5 loudspeakers. With 2 AV500 (1 AV500 for tweeters and 1 for bass), it
is always possible to make a biamplification. In that case, drive the 2nd AV500 from
outputs of the first one.
