Atoll Electronique IN50se User manual

CONNECTING:
Rear of Amplifier:
1) Auxiliary Input (or phono, or digital) 7) By-pass input (*)
2) C.D. Input 8) Preamp. Outputs
3) Tuner Input 9) Right channel Output
4) DVD Input 10) Left channel Output
5) Tape Input (PLAY) 11) Power Plug
6) Tape Output (REC) 12) Power Switch
(*) Connect the By-Pass input to an A/V preamplifier. By selecting this input, your
integrated will work as a power amplifier, by-passing the preamp. section.
FUNCTIONS:
Front view of appliance:
13) Volume knob 16) Stand-By key
14) Headphones (cuts the speakers when a 17) sources selections keys
headphones is plugged) 18) i.r. captor
15) Power indicator led (orange=stand-by; 19) sources indicators leds
green=switch on; red=mute)
2
ADVISES:
-To optimise the performances of your amplifier, you should switch it on at least
half an hour before any listening, the time for power stage to reach their ideal
working temperature. Between two utilisations, it is better to use the stand-by
position, so that the power stages remains at their optimal temperatures.
- Double Pre-out can be use for bi-amping loudspeakers directly from Integrated.
You can also use those pre-out for a subwoofer.
ELECTRONIC PROTECTION:
An electronic system is equipped on your amplifier. If you go over the maxima power
allowed, the led indicator goes « red » and the amplifier cuts off automatically after
few seconds. It is then ready to use.
REMOTE CONTROL:
Your Integrated can be used with our global remote control. (optional)
Your Remote Control is fully equipped with 2 Lithium 3V batteries CR2025.
(1) ):"Mute" is deactivate with the volume key + and also by a second press on the
MUTE key, or by switching off the amplifier.
TROUBLES AND SOLUTIONS:
TROUBLES
PROBABLE CAUSES
- The power led (15) do not
switch on;
- The power switch (12) is on wrong
position ;
- The sector wire is badly plugged;
-.The power led (15) is on but
there's no sound;
- Input selector (17) is on the wrong
position;
- There is no sound from one
speaker whichever input is
selected;
- Check all connections between the
amplifier and the speakers;
-. There is no sound from one
speaker when an input is
selected;
-. Check all connections between the
amplifier and the input;
3
1 2 3 4 5 6 7 8 9
10
11 12
13
14 15 16 17 18 19
Sources selection - & + (except by-pass)
Mute (1).
Stand-By
By-Pass : : select the by-pass input while
pressed during approx. 3 seconds.
Volume - & +
direct sources access {

E.C. MARKING:
E.C. marking certified the conformity with low tension directive 73/23/CEE,
directive CEM 89/336/CEE and national transpositions.
CLEANING:
Before any cleaning, switch off your amplifier (10). Use a soft and dry rag to clean
up the appliance. Never use acetone, white-spirit, ammoniac, or any kind of
product containing abrasive agent. Never try to clean up inside the appliance.
GUARANTEE:
The guarantee is two years long from date of purchase. We recommend you to ask
your dealer to fill the guarantee and to conserve it. The guarantee is only available
for appliance which has been use correctly.
TECHNICAL
SPECIFICATIONS
AMP-PREAMP INTEGRATED
IN50se
IN80se
IN100se
Efficacy power :
Impulsion power :
Power supply :
Total of capacitors :
Number of Inputs:
Preamp. Outputs :
Stand-by :
Input impedance :
Sensitivity :
Signal/Noise :
Distorsion at 1kHz :
Frequency response :
Rise Time :
Dimensions :
Weight :
50 W /channel /8
70 W /channel /4
90 W /channel
160 VA
15 000 F
5+1 by-pass
2
YES
220 k
100 mV
100 dBA
< 0,05% /10W
5Hz-80kHz
3 s
440x90x255mm
7 kg
80 W /channel /8
120 W /channel/4
150 W /channel
330 VA
30 000 F
5+1 by-pass
2
YES
220 k
100 mV
100 dBA
< 0,05% /10W
5Hz-100kHz
2,5 s
440x90x255mm
8 kg
100 W /channel/8
140 W /channel/4
180 W /channel
660 VA
30 000 F
5+1 by-pass
2
YES
220 k
100 mV
100 dBA
< 0,05% /10W
5Hz-100kHz
2,5 s
440x90x255mm
11 kg
ATOLL ELECTRONIQUE®is a French Company who conceives, manufacture
and commercialise all its products.
4
You have just bought an Amp-Preamp. Integrated with an
exceptional audiophile performance. We really thank you for your
confidence on our products. To get the best part of your amplifier,
please read carefully this manual.
CAUTIONS :
- Put your amplifier in a dry and well ventilated place, far from
source of heat;
- Do not put something on your amplifier;
- Do not make any plug in when the amplifier is on;
- Avoid any short-cut;
- Respect polarity + & - and switch left & right;
- Do not plug in two speakers in parallel on the same output.
Caution: the level indicated on the graduations of volume knob is
arbitrary, it does not provide information directly of the power
output. In fact, depending on your configuration (source and
speakers) maximum power may be exceeded at level 4 of the
potentiometer and therefore generate excessive heat or premature
wear of the amplifier.
You will find enclosed:
- an amp-preamp integrated ;
- one powerlead;
- this manual with the certificate of guarantee.
1


G U A R A N T E E - I N T E G R A T E D –s e -
To present to your dealer with the invoice when returning back the
appliance:
ATOLL ELECTRONIQUE®
Bd des Merisiers
50370 BRECEY
FRANCE
Dealer Stamp
Date of purchase :
Place of purchase :
Buyer signature :
OWNER'S MANUAL
Amp-preamp. Integrated
IN50se - IN80se - IN100se