Atoll Electronique IN30 User manual

CONNECTING:
Rear of Amplifier:
1) Aux Input 6) Preamp. Output
2) CD Input 7) Right Channel Output
3) Tuner Input 8) Left Channel Output
4) DVD Input 9) Power plug
5) Tape Input (or By-Pass(*)) (with protection fuse)
10) Power switch
(*) Connect the By-Pass input to an A/V preamplifier. By selecting this input, your
integrated will work as a power amplifier, by-passing the preamp. section. (see p5)
FUNCTIONS:
Front view of appliance:
13) Volume keys + & - ; By-pass selection (see p5)
14) Noise level indicator (left balance level & « wattmeter »);
15) Source selected indicators (right balance level & « wattmeter »);
16) Source selection keys ;
17) MODE : select : Mute, Balance & « wattmeter » ; see mode function p4
18) Headphones Output (3,5 mm) ;
19) Jack 3,5 mm Input for Media Player and its Input selection indicator ;
20) Power ON/OFF key: OFF (orange), ON (green) or Mute (red) ;
3
ADVISES:
-To optimise the performances of your amplifier, you should switch it on at least
half an hour before any listening, the time for power stage to reach their ideal
working temperature. While not using your integrated, it is better to use the stand-
by position, so that the power stages remains at their optimal temperatures.
- You can use the Pre-out for switching a subwoofer.
ELECTRONIC PROTECTION:
An electronic system is equipped on your amplifier. If you go over the maxima power
allowed, the led indicator goes « red » and the amplifier cuts off automatically after
few seconds. It is then ready to use.
REMOTE CONTROL:
Your Integrated can be used with our global ATOLL remote control. (optional)
Your Remote Control is fully equipped with 2 Lithium 3V batteries CR2025.
IMPORTANT : Keys of the remote control sometimes do not have the same action
as keys of the front panel.
(1) "Mute" is deactivate with the volume + key and also by a second press on the
MUTE key, or by switching off the amplifier. In MUTE mode, level is shown by the
upper led indicator.
MODE FUNCTIONS:
MODE key of the front panel gives access to several setup :
- Brief press:mute the speakers Outputs (use this function while listening with the
headphones). A second push reactivates Outputs.
- PRESS 2 seconds: gives access to the BALANCE setup : Balance is represented by
both sides left and right of leds indicators. Press VOL –to rise left channel, and press
VOL + to rise right channel. Balance setup keep operating while the appliance is put
on Stand-by. This setup is cleared if the applaince is cut off with the power switch.
- PRESS 4 seconds: Gives access to the « wattmeter » option. Depending of sound
level, indicators shows the Output power measurments. With that mode, all other
functions are available.
4
13
14 15 16 17 18 19 20
1 2 3 4 5 6 7 8 9 10
selects all lights On or Off
Sources selection - & + (except by-pass)
Mute (1)
Stand-By
Selection of MP Input (19)
By-Pass: select the by-pass input while
pressed during approx. 3 seconds.
Volume - & +
(& Balance setup)
Access to « wattmeter » mode
Access to the Balance setup
direct sources access {

BY-PASS FUNCTION:
The By-pass Input is used to be plugged to an other preamplifier (A/V preamp.).
Once this Input selected, the IN30 works just like a power amplifier (gain is the
same as all other ATOLL’s power amplifiers).
You Access to the By-pass by pressing together VOL + & VOL –keys of the front
panel during 2 seconds. By-Pass indicator lights on automatically. Use the same
way to get out the By-pass position.
You can get to the By-pass directly from the remote control while pressing around
3 seconds on TAPE key.
E.C. MARKING:
E.C. marking certified the conformity with low tension directive 73/23/CEE,
directive CEM 89/336/CEE and national transpositions.
CLEANING:
Before any cleaning, switch off your amplifier (10). Use a soft and dry rag to clean
up the appliance. Never use acetone, white-spirit, ammoniac, or any kind of
product containing abrasive agent. Never try to clean up inside the appliance.
GUARANTEE:
The guarantee is two years long from date of purchase. We recommend you to ask
your dealer to fill the guarantee and to conserve it. The guarantee is only available
for appliance which have been use correctly.
TECHNICAL FACTS:
INTEGRATED IN30
Efficacy power :
50 W /channel /8
70 W / channel /4
Sensitivity :
280 mV
Impulsion power :
90 W / channel
Signal/noise ratio :
100 dBA
Power supply :
170 VA
Distorsion rate at 1kHz :
< 0,05% /10W
Total of capacitors :
20 000 F
Frequency respnse :
5Hz-100kHz
Number of Inputs :
4+1 by-pass + 1 jack
Rising time :
3 s
Preamp. Output :
1 pair
Dimensions :
440x80x255mm
Input Impedance :
220 k
Wheight :
5 kg
(datas liable to change)
ATOLL ELECTRONIQUE®is a French Company who design, manufacture and
commercialise all its products.
5
You have just bought an Amp-Preamp. Integrated IN30 with
exceptional audiophile performance. We really thank you for your
confidence in our products. To get the best part of your amplifier,
please read carefully this manual.
CAUTIONS:
- Put your amplifier in a dry and well ventilated place, far from
source of heat;
- Do not put something on your amplifier;
- Do not make any plug in when the amplifier is on;
- Avoid any short-cut;
- Respect polarity + & - and switch left & right;
- Do not plug in two speakers in parallel on the same output.
You will find enclosed:
- an amp-preamp integrated ;
- one powerlead;
- this manual with the certificate of guarantee.
2


G U A R A N T E E - I N T E G R A T E D –I N 3 0 -
To present to your dealer with the invoice when returning back the
appliance:
ATOLL ELECTRONIQUE®
Bd des Merisiers
50370 BRECEY
FRANCE
Dealer Stamp
Date of purchase :
Place of purchase :
Buyer signature :
OWNER'S MANUAL
Amp-preamp. Integrated
IN30