ATTO Technology iPBridge 1500D User manual

IP Storage
155 CrossPoint Parkway • Amherst, NY 14068 • 716 • 691 • 1999
attotech.com
iSCSI-to-SCSI Bridge for Cost-effective IPSAN Connectivity
ATTO iPBridge™1500D
• One independent Gigabit Ethernet port to
one independent Ultra160 SCSI port
•Compatible with all leading iSCSI initiators
•Gigabit Ethernet connectivity auto negotiates
to 10/100 Ethernet
•Designed to the IETF Industry Standard
iSCSI Protocol v1.0
•30 MB/sec. throughput
•Features intelligent Bridging Architecture for
optimized performance
•ExpressNAV™ integrated management console
for remote configuration, management and
diagnostic capabilities
•Supports all SCSI devices including hard disk
drives, tape drives, RAID controllers, DVD,
MO & CD libraries
TECHNICAL
HIGHLIGHTS
Take advantage of today’s revolution
in storage connectivity. Connect your
existing Direct Attached Storage (DAS)
solutions into an Ethernet network to
consolidate your storage and reduce
operational costs.
ATTO’s iPBridge™ 1500D supports GigE
and SCSI devices in an IP SAN topology.
Uniquely designed to support the IP SAN
needs of today’s Small and Medium
Businesses and Enterprises (SMB / SME),
the iPBridge optimizes connectivity
and management by utilizing ATTO’s
proven intelligent Bridging Architecture™.
The ATTO iPBridge™ 1500D is a desktop
unit that offers broad market acceptance
through leading ISV certifications and
support for leading iSCSI protocols,
allowing for storage devices such as
hard drives, tape drives and libraries,
and CD jukeboxes to easily attach to
IP networks.

IP Storage
Rev 1, 9/04
Gigabit Ethernet and SCSI
GbE Interface:
•10/100/1000 GbE RJ45 Ethernet port
• Supports IP v 4
•Supports iSCSI Protocol 1.0
• Compliance with IEEE 802.3ab GbE
•Compliance with IEEE 802.3x Flow Control
• SNMP MIB 2 support
•Supports Jumbo Ethernet frame
SCSI Interface:
•Single 68-pin SCSI connector
•Ultra160 LVD SCSI – 160 MB/sec.
maximum throughput
•Backward compatible with all single-ended
SCSI devices
•Supports SCSI-3 specifications
Management
Operating Environment
• Operating system independent
•Supports all SCSI devices including hard
disk drives, tape drives, RAID controllers,
DVD, MO and CD libraries
Local and Network Management:
• ExpressNAV™ integrated management
console for remote configuration,
management and diagnostic capabilities
•Command line management access via
Ethernet and RS232
•Local diagnostics supported through
SNMP, Telnet, and FTP
•Includes support for DHCP, ICMP, and RMON
•Built in memory has ECC detection and
correction
•User accessible reset switch
•Built-in watchdog timer
•Automatically detects and maps all
connected devices at power on
ATTO iPBridge™1500D
Environmental and Physical
Characteristics
Configurations:
•Desktop Enclosure
Dimensions:
•Desk Enclosure:
7.5” W x 5” L x 1.76” H
Operating Environment:
•Operating Temperature: 5-40º Celsius
Power: 12 V, 1.5A, 2.5mm DC power jack
12 V, 20 W wall mount power adapter
Universal 90-264 VAC
nominal power consumption: 1A @ 12V
Weight: 2 lbs
SCSI Activity
Power
RS232 Port