ATZ HDMI-E200W User manual

Model : ATZ HDMI-E200W
Description : HDMI Wireless Extender 200M
1. INCREASE YOUR VIEWING RANGE: Transmitter and Receiver wirelessl sends HDMI
A/V signals up to 200m through line-of-sight environments; works with most HDMI-
equipped devices, including blu-ra pla ers, set-top boxes, AV receivers, cable/satellite
boxes, and computer s stems.
2. BUILT-IN IR REMOTE CONTROL: Built-in IR signal extension feature allows ou to
control the pla back device remotel . Imagine ou have a DVD pla er in our media room
and a TV in our living room, while ou are in the living room, ou can still use our DVD
remote to control the DVD pla er with IR CONTROL EXTENSION function.
3. UNCOMPROMISED VIDEO QUALITY: Supports vivid, high-definition videos up 1080p
@60Hz. Compatible with HDCP 1.2 (High-bandwidth Digital Content Protection); best used
for TV/video applications rather than computers or real-time applications; Note: A dela of
less than 0.5 seconds might occur due to data compression- Not recommended using for
PC gaming.

Model : ATZ HDMI-E200W
Description : HDMI Wireless Extender 200M
The extender uses TCP /IP standard Wireless Transport Protocol, so it has high
transmission rate and strong anti-interference capabilit . It has HDMI loop-out port with IR
capabilit to control source devices remotel . The HDMI Wireless Extender is widel
applicable for office presentation, lecture, education, conference, famil entertainments
etc.
Features:
•Contains a transmitter (TX) and a receiver ( X). The HDMI signal over
wireless transmission from the transmitter to the receiver
•The TX support one HDMI loop output, for local screen monitor
•Support HDMI resolution: 480P~1080P@50/60Hz and SVGA~WUXGA
•Use the internationally accepted 5G ISM frequency band, high
transmission rate and strong anti-interference capability
•Using an external dual - gain antennas. Full HD 1080p transmits up to
200 meters wireless in open space.( May be affected by the use
environment)
•Extends wide-band infrared remote to control source device from display
side
•Support OSD, for informed of device status
•Simple Plug and Play, no software installation required
•Supports both panel settings and Web Configuration Interface, Simple
and easy to use
FEATURES OF THE INTERFACE:
Transmitter (T )
FIG.1 TX Front Panel View FIG.2 TX ear Panel View
HDMI IN HDMI OUT
DC5V
IR OUT&RESET POWER STATUS HDMI
TX HIGH-LOW
CHANNEL

Model : ATZ HDMI-E200W
Description : HDMI Wireless Extender 200M
Receiver (R )
FIG.3 X Front Panel View FIG.4 X ear Panel View
POWER: Power indicator
STATUS: System status indicator
HDMI: HDMI input/output status
indicator
CHANNEL: Wireless channel switch key
HIGH-LOW: ate selector switch
HDMI IN: HDMI INPUT
HDMI OUT: HDMI OUTPUT
DC5V: 5V DC in jack
IR OUT&RESET: Insert I transmitter cable & Factory eset Button
IR IN&RESET: Insert I receiver cable & Factory eset Button
IR IN&RESET POWER STATUS HDMI
RX HDMI OUT
DC5V

Model : ATZ HDMI-E200W
Description : HDMI Wireless Extender 200M
pg. 4
Notes : - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only. Photo attached is for reference only, it may be slightly varied in items of colour,
shape from the actual item delivered from time to time.
All specifications are subject to change without prior notice.
© Copyright A Z
OPERATIONG AND CONNECTION:
1. Connect one HDMI cable from the DVD/BD player into the HDMI input port of the HDMI
wireless TX.
2. Connect one HDMI cable from TV/Monitor into the HDMI output port of the HDMI wireless
X.
3. Connect the I Transmitter cable to the HDMI wireless TX and the I Transmitter cable must
face to the control target device.
4. Connect I eceiver cable to the HDMI wireless X.
5. Connect 5V power supplies to the TX& X, the POWE indicator will be lit at this moment.
6. The device will automatically connect after power on. The STATUS indicator of TX and X
will be lit when the connection is successful. If the HDMI input or output signal is normal,
the HDMI indicator light will be lit also. The STATUS indicator flashes continuously during
normal transmission.
TX RX
IR Receiver cable
HDTV Monitor/Projector
DVD/PS3/STB/PC
Local monitor

Model : ATZ HDMI-E200W
Description : HDMI Wireless Extender 200M
pg. 5
Notes : - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only. Photo attached is for reference only, it may be slightly varied in items of colour,
shape from the actual item delivered from time to time.
All specifications are subject to change without prior notice.
© Copyright A Z
Web settings:
To prevent the interference caused by the same frequency device, the Wireless HDMI
Extender support to set up the transmit channel and SSID by the WEB. For safety, the
user should change the SSDI and the password at the first log in. Please follow the
below steps:
1. Connect 5V power supplies to the TX& X, and let them be connected.
2. Turn on the WLAN of the mobile phone / PC ， search and connect
SSID ： HDMI_Wireless, Enter the default password: 00000000.
3. Modify the IP address type of the mobile phone / PC to Auto. When you select
static type, you must be set the IP in 192.168.1. xxx address segment range,
e.g. 192.168.1.100.
4. Open the browser and scan the Q code or enter “192.168.1.10”
in the address bar to enter the configuration page.. As shown below:

Model : ATZ HDMI-E200W
Description : HDMI Wireless Extender 200M
pg. 6
Notes : - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only. Photo attached is for reference only, it may be slightly varied in items of colour,
shape from the actual item delivered from time to time.
All specifications are subject to change without prior notice.
© Copyright A Z
5. Enter the default login password: admin, click “Login” open the Settings Interface.
If you want to modify the login password, please click on the " Modify ", after modified
click "save" to save and exit. estore factory settings when click "reset".
6.If you have an error in setting or forgot the password, you can restore factory
setting.
Specifications:
Transmitter Unit 1x HDMI input + 1x HDMI loop out
eciever Unit 1x HDMI output
HDMI resolution Up to 1080p@50/60Hz
HDMI Audio Format LPCM2.0/48KHz/16Bit
HDMI Max bandwidth
225MHz
HDMI Max baud rate 6.75Gbps
Input/Output TMDS signal
0.5~1.5Volts p
-
p(TTL)
Input/Output DDC signal
5Volts p
-
p (TTL)
HDMI output cable distance
≤15m AWG26 HDMI standard cable
Antenna type External dual 3dBi gain antenna
Wireless standard IEEE 802.11a/b/g/n
Wireless Band 5G ISM Band
Operational range Up to 200M in open space

Model : ATZ HDMI-E200W
Description : HDMI Wireless Extender 200M
pg. 7
Notes : - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only. Photo attached is for reference only, it may be slightly varied in items of colour,
shape from the actual item delivered from time to time.
All specifications are subject to change without prior notice.
© Copyright A Z
Latency (delay) <200 ms
I
Carrier frequency
20
-
60KHz
Video compression Comparable with H.264
Max Data rates 2T2 up to 300Mbps
Transmit Output Power （ IPEX ） 20dBm Max
I Carrier frequency
20
-
60KHz
TX/ X Max working current 1A
Power adapter format Input
AC 100V ～ 240V 50HZ/60Hz, DC5V/2A
Operating Temperature range -5 to +45
℃
Storage Temperature range -20 to +60
℃
Operating Humidity range 10 to 90% H (No Condensation)
Storage Humidity range 5 to 95% H (No Condensation)
Case Dimension (L x W x H) 127.5x127.5x25 (mm)
Weight TX163g/ X160g

Model : ATZ HDMI-E200W
Description : HDMI Wireless Extender 200M
pg. 8
Notes : - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only. Photo attached is for reference only, it may be slightly varied in items of colour,
shape from the actual item delivered from time to time.
All specifications are subject to change without prior notice.
© Copyright A Z
FAQ:
Before power on, pls check the connection line carefully. And make sure that all interfaces
are normally connected. The common trouble shooting way shows below:
No.
Problem
Description Solutions
1 No display
1. Check the TV is on and has been connected with the
machine.
2. Please check the TX power supply
3. Make sure the TV is working regularly
2 Display
“Connecting”
1. Please check the X power supply
2. Please check the WEB are set correctly
3. Co-channel interference. Pls select a new channel
4. Pls reset or turn off the power restart
3 Display “No signal”
1. Check the signal source is power on and output
normal.
2. Check the signal source output resolution.
3. Make sure the HDMI cable is properly connected
4 Transmission
distance is short
1.
Please adjust the angle of the antenna or adjust the
placement
2. Concrete walls, Brick, Wallpaper, Metal, Bulletproof
glass will
shorten the signal cover range or cause big signal loss.
3. Co-channel interference. Pls select a new channel
5 Screen not fluent
1. Please adjust the angle of the antenna or adjust the
placement
2. Co-channel interference. Pls select a new channel
6 Can't find the SSID
1. Please check the X and TX power supply
2. Please check whether the Phone/PC support 5G band
3. Factory default or turn off the power restart
7
Can't login to the
Web settings
interface
1. Please check the X and TX power supply
2. Please check the IP type of mobile phone/PC is Auto
3. Please check the IP is in 192.168.1. XXX address
range
4. Please try Login again after changed a browser

Model : ATZ HDMI-E200W
Description : HDMI Wireless Extender 200M
pg. 9
Notes : - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only. Photo attached is for reference only, it may be slightly varied in items of colour,
shape from the actual item delivered from time to time.
All specifications are subject to change without prior notice.
© Copyright A Z
Product Diagram:

Model : ATZ HDMI-E200W
Description : HDMI Wireless Extender 200M
pg. 10
Notes : - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only. Photo attached is for reference only, it may be slightly varied in items of colour,
shape from the actual item delivered from time to time.
All specifications are subject to change without prior notice.
© Copyright A Z
Package contents:
1x HDMI Wireless Transmitter
1x HDMI Wireless eceiver
1x I Transmitter cable
1x I eceiver cable
1x User manual
2x DC power adapter
Warranty: 2 Years
Warranty is effective from the date of original delivery.
This warranty shall be void if a serial number has been removed from the product.