ATZ ATZ HDMI4K+VGA-EM100IR-TX User manual

pg. 1
Notes: - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only.
Photo attached is for reference only, it may be slightly varied in items of colour, shape from the actual item delivered from time to time.
All specifications are subject to change without prior notice.
© Copyright ATZ 2016
Model : ATZ HDMI4K+VGA-EM100IR-TX
Description: HDMI4K/VGA over IP Transmitter with IR, RS-232, PoE/ LAN &
USB/KVM Extension

pg. 2
Notes: - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only.
Photo attached is for reference only, it may be slightly varied in items of colour, shape from the actual item delivered from time to time.
All specifications are subject to change without prior notice.
© Copyright ATZ 2016
Model : ATZ HDMI4K+VGA-EM100IR-TX
Description: HDMI4K/VGA over IP Transmitter with IR, RS-232, PoE/ LAN &
USB/KVM Extension
INTRODUCTION:
This unit is part of a 4K UHD Multi-Function Extension system that allows you to extend
HDMI or VGA signals along with KVM using the TCP/IP protocol over regular Cat.5e/6/7
network cable. This extender supports the transmission of Ultra High-Definition signals
(up to 4K@30Hz YUV 4:4:4 or 4K@60Hz YUV 4:2:0) with audio and USB up to 100m on
a single cable. The transmission distance can be further extended (up to 100m per
segment) by using gigabit network switches, allowing the user to cascade the system
without signal loss or introducing delay.
It is also possible to have the extension system's Transmitter operatein multicast mode,
allowing you to send a single AV signal to a large number of Receivers within the same
local network. Additionally, that same multicast signal can be used to create large multi-
display video walls with amazing simplicity. This system is perfect for both residential
and commercial installation environments.
This system also features bi-directional IR and RS-232 pass-through, analog line level
in/out, and a microphone input (on the Receiver), providing the user with a variety of
audio options. The USB functionality allows the system to act like a remote USB hub
which, when combined with the VGA input/output feature, provides a flexible remote
KVM platform. Configuration information is provided via On Screen Display (OSD) and
control is by WebGUI, Telnet, and front panel controls.
APPLICATIONS:
•HDMI, VGA, USB, Audio, IR, and RS-232 extension
•Broadcasting a system over a single Cat.5e/6 cable
•Multimedia display on a large number of displays via multicast
•Hotel or convention center display multi-monitor broadcast
•Long distance data and video transmission via cascading
•Distributed video matrix system
•Distributed video wall system
•Remote KVM control of a system

pg. 3
Notes: - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only.
Photo attached is for reference only, it may be slightly varied in items of colour, shape from the actual item delivered from time to time.
All specifications are subject to change without prior notice.
© Copyright ATZ 2016
Model : ATZ HDMI4K+VGA-EM100IR-TX
Description: HDMI4K/VGA over IP Transmitter with IR, RS-232, PoE/ LAN &
USB/KVM Extension
SYSTEM REQUIREMENTS:
•HDMI or VGA source equipment such as media players, video
game consoles, PCs or set-top boxes.
•HDMI or VGA receiving equipment such as HDTVs, monitors or audio
•Analog audio receiving equipment such as headphones, audio
amplifiers or powered speakers.
•A Gigabit Ethernet network switch with jumbo frame support is required.
(8K jumbo frames are strongly recommended.)
•A Gigabit Ethernet switch with “IGMP snooping” enabled is required for multicast
support.
FEATURES:
• HDMI 2.0 and DVI 1.0 compliant
• HDCP 1.4 & 2.2 compliant
• 1×HDMI input, 1×VGA input & 1×VGA bypass output
• Video, audio and control transmission over TCP/IP in Unicast (point- to-point) or
Multicast (single-to-many) modes
• Multi-monitor video wall support with 90° rotation
• HDMI input resolutions up to 4K@60Hz (YUV 4:2:0, 8-bit) or 4K@30Hz
(YUV 4:4:4, 8-bit)
Note: 4K@50/60Hz (YUV 4:2:0) sources are automatically converted to 4K@25/30Hz
(RGB) for output
•VGA input and output resolutions up to WUXGA (RB)
•Supports pass-through of audio formats including LPCM 2.0/5.1/7.1,
and Bitstream over HDMI
Note: The optical output on Receivers can only support LPCM 2.0 & Bitstream sources.
•The analog Line In on the Transmitter sends audio directly to the analog Line Out
and is inserted into the HDMI output on connected Receivers

pg. 4
Notes: - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only.
Photo attached is for reference only, it may be slightly varied in items of colour, shape from the actual item delivered from time to time.
All specifications are subject to change without prior notice.
© Copyright ATZ 2016
Model : ATZ HDMI4K+VGA-EM100IR-TX
Description: HDMI4K/VGA over IP Transmitter with IR, RS-232, PoE/ LAN &
USB/KVM Extension
•The Mic In on the Receiver sends audio directly to the analog Line
Out on the Transmitter
•Both Tx and Rx may powered directly by PoE when connected to a
Gigabit Ethernet switch that provides PoE (802.3af)
•Supports USB keyboard, mouse and storage extension
•Supports IR and RS-232 bypass
•Unit can be controlled via WebGUI, Telnet, and front panel controls
TECHNICAL SPECIFICATIONS:
HDMI Bandwidth
340MHz/10.2Gbps
Input Ports
1×HDMI
1×VGA
1×3.5mm (Stereo Audio) 1×IR
Extender [3.5mm] 1×RS-232 [9-pin
D-sub] 1×USB Type-B
Output Ports
1×Cat.5e/6/7 (LAN)
1×3.5mm (Stereo Audio)
1×IR Blaster [3.5mm]
Supported Resolutions
480i@60Hz - 4K@30Hz (4:4:4, 8-bit)
VGA@60Hz - WUXGA@60Hz (RB)
IR Frequency
30 - 50kHz (30 - 60kHz under ideal conditions)
Power Supply
5V/2.6A DC (US/EU standards, CE/FCC/UL certified)
ESD Protection
Human Body Model:
±12kV (Air Discharge)
±8kV (Contact Discharge)

pg. 5
Notes: - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only.
Photo attached is for reference only, it may be slightly varied in items of colour, shape from the actual item delivered from time to time.
All specifications are subject to change without prior notice.
© Copyright ATZ 2016
Model : ATZ HDMI4K+VGA-EM100IR-TX
Description: HDMI4K/VGA over IP Transmitter with IR, RS-232, PoE/ LAN &
USB/KVM Extension
Dimensions
231.5mm×25mm×108mm (W×H×D)
[Case Only]
231.5mm×25mm×120mm (W×H×D)
[All Inclusive]
Weight
660g
Chassis Material
Metal
Silkscreen Color
Black
Operating Temperature
0˚C - 40˚C/32˚F - 104˚F
Storage Temperature
−20˚C - 60˚C/−4˚F - 140˚F
Relative Humidity
20 - 90% RH (Non-condensing)
Power Consumption
7.15W
Video Specifications
Input
Ouput
Supported Resolutions (Hz)
HDMI
VGA
HDMI
VGA
640×480p@60




720×480p@59/60


720×576p@50




800×600p@60




1024×768p@60




1280×720p@50/59/60




1280×768p@60


1280×960p@60




1280×1024p@60




1440×480p@60


1440×576p@50


1366×768p@60




1600×1200p@60 (RB)




1920×1080p@24/25


1920×1080p@50/59/60





pg. 6
Notes: - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only.
Photo attached is for reference only, it may be slightly varied in items of colour, shape from the actual item delivered from time to time.
All specifications are subject to change without prior notice.
© Copyright ATZ 2016
Model : ATZ HDMI4K+VGA-EM100IR-TX
Description: HDMI4K/VGA over IP Transmitter with IR, RS-232, PoE/ LAN &
USB/KVM Extension
1920×1200p@60 (RB)




1920×1080i@50/59/60


3840×2160p@24/25/30


3840×2160p@50/60 (YUV
4:2:0)


4096×2160p@24/25/30


Notes:
• HDMI Input: Up to 4096×2160p@60Hz (YUV 4:2:0).
•HDMI Output: HDMI input at 4K@60Hz (YUV 4:2:0) will automatically be converted
to 4K@30Hz (RGB) for output.
•VESA VGA up to 1920×1200@60Hz (Pixel clock<150MHz).
Audio Specifications
Supported Audio Formats:
Supported Formats (kHz)
HDMI Input
HDMI Output
LPCM [email protected]/88.2/176.4


LPCM 2.0@32/48/96/192


LPCM [email protected]/88.2/176.4


LPCM 5.1@32/48/96/192


LPCM [email protected]/88.2/176.4


LPCM 7.1@32/48/96/192


Standard Bitstream



pg. 7
Notes: - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only.
Photo attached is for reference only, it may be slightly varied in items of colour, shape from the actual item delivered from time to time.
All specifications are subject to change without prior notice.
© Copyright ATZ 2016
Model : ATZ HDMI4K+VGA-EM100IR-TX
Description: HDMI4K/VGA over IP Transmitter with IR, RS-232, PoE/ LAN &
USB/KVM Extension
OPERATION CONTROLS AND FUNCTIONS:
Transmitter's Front Panel
(1) POWER LED: This LED will flash while the unit is powering on and will
illuminate solidly once it is ready to be used.
(2) LINK LED: If the Transmitter has no network connection the LINK LED will not
illuminate. While the Transmitter is attempting to establish
a connection with a Receiver the LINK LED will flash. When the Transmitter has
established a stable connection with a Receiver the LINK LED will illuminate solidly.
(3) RS-232 IN: Connect directly to your PC/laptop to send commands to RS-232
devices connected to the Receiver. The baud rate is configurable, but the default baud
rate is 115200.
Note: When the Transmitter is in multicast mode every connected Receiver unit can
send RS-232 commands to the Transmitter
and commands sent from the Transmitter side will be sent to all associated Receivers.
(4) ISP SEL: For Factory use only. By default this is set to the right (away
from the RS-232 port) and allows normal RS-232 functionality. Setting this switch to the
left enables ISP engineering mode.
(5) IR OUT: Connect to the provided IR Blaster to transmit IR signals sent from the
associated Receiver to devices within direct line-of-sight of the IR Blaster.
(6) IR IN: Connect to the provided IR Extender to extend the IR control range of
remotely located devices. Ensure that the remote being used is within direct line-of-sight
of the IR Extender.
1 2
4 5 6 7 8 9 10 11
12

pg. 8
Notes: - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only.
Photo attached is for reference only, it may be slightly varied in items of colour, shape from the actual item delivered from time to time.
All specifications are subject to change without prior notice.
© Copyright ATZ 2016
Model : ATZ HDMI4K+VGA-EM100IR-TX
Description: HDMI4K/VGA over IP Transmitter with IR, RS-232, PoE/ LAN &
USB/KVM Extension
Note: When the Transmitter is in multicast mode the IR signal is sent to all associated
Receivers.
(7) IR WINDOW: Accepts IR signals from any standard remote control
and sends the signal to the IR Out on the associated Receiver.
Note: When the Transmitter is in multicast mode the IR signal is sent to all associated
Receivers.
(8) LOOPBACK/LINK: This button controls multiple functions:
(a) Loopback: Press this button momentarily to toggle the VGA Loopback function on
and off, allowing you to locally monitor non- HDCP HDMI sources (1080p or below) for
troubleshooting purposes.
(b) Video Link: Press and hold the button for 3 seconds to enable or disable the Video
Link. When the link is disabled and the Receiver is connected to a display it will show the
system’s current IP and firmware information.
(c) Reset to Factory Defaults: Press and hold this button when powering the unit on
until both the POWER and LINK lights are blinking. Once both lights are blinking you can
reboot the unit and all settings will be returned to the factory defaults (Including
resetting the IP mode to auto, broadcast channel to 0, and the streaming mode to
multicast). A new IP address will be assigned automatically within the 169.254.xxx.xxx
address range.
(9) MODE/Anti-DITHER: This button controls multiple functions:
(a) Video Mode: Press this button momentarily to toggle the video data streaming
method between “Graphic” and “Video” modes. “Graphic” mode is optimized for high-
detail static displays and “Video” mode is optimized for full motion video.
(b) Anti-Dither: Press and hold this button for 3 seconds to enable and switch between
the three “Anti-Dither” modes (1-bit, 2-bit and off). Certain graphics cards use dithering
to emulate a larger color palette, but dithering causes difficulty for maintaining low-
bandwidth during real-time video compression, so these Anti- Dithering modes are
designed to remove the dithering prior to compression and transmission of the signal. If

pg. 9
Notes: - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only.
Photo attached is for reference only, it may be slightly varied in items of colour, shape from the actual item delivered from time to time.
All specifications are subject to change without prior notice.
© Copyright ATZ 2016
Model : ATZ HDMI4K+VGA-EM100IR-TX
Description: HDMI4K/VGA over IP Transmitter with IR, RS-232, PoE/ LAN &
USB/KVM Extension
the source is not using dithering, please leave this feature disabled as it may cause a
blocking effect with non-dithered content.
Note: This feature is set to “off” by default.
(10) ISP: For factory use only.
(11) RESET: Press this recessed button to reboot the unit (Settings will not be reset).
(12) VGA LOOPBACK OUT: Connect to an analog VGA monitor to locally view the
connected VGA or HDMI (non-HDCP, 1080p or lower) source.
Transmitter's Rear Panel
(1) DC 5V: Plug the 5V DC power adapter into the unit and connect it
to an AC wall outlet for power. (Optional if powered by PoE)
(2) USB: Connect directly to a PC to extend its USB functionality to the
ports on the connected Receiver.
(3) LAN (PoE): Connect via a Gigabit Ethernet switch to compatible Receiver(s) to
transmit data, and to a PC/laptop to control the unit via WebGUI.
Note: This unit can be powered directly by the connected Gigabit Ethernet switch if it
provides PoE (802.3af).
(4) VGA IN: Connect to VGA source equipment such as a PC or laptop.
Note: PC text and content with fine details may display with some
visual artifacts when transmitted at 4K@60Hz (YUV 4:2:0).
(5) HDMI IN: Connect to HDMI source equipment such as a media
1 2

pg. 10
Notes: - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only.
Photo attached is for reference only, it may be slightly varied in items of colour, shape from the actual item delivered from time to time.
All specifications are subject to change without prior notice.
© Copyright ATZ 2016
Model : ATZ HDMI4K+VGA-EM100IR-TX
Description: HDMI4K/VGA over IP Transmitter with IR, RS-232, PoE/ LAN &
USB/KVM Extension
player, game console or set-top box.
(6) LINE IN: Connect to the stereo analog output of a device such as a CD player or
PC.
Note: When a live audio source is connected to the Line In, it will be automatically
embedded into the transmitted signal, and will completely replace any existing HDMI
audio.
(7) LINE OUT: Connect to powered speakers or an amplifier for stereo analog audio
output. This will output the audio from the Mic In on the connected Receiver.
Note: This function is only available in Unicast mode. The Mic In audio channel from the
Receiver is only active when an analog source is also connected to the Line In port on
the Transmitter.
IR Cable Pin Assignments:

pg. 11
Notes: - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only.
Photo attached is for reference only, it may be slightly varied in items of colour, shape from the actual item delivered from time to time.
All specifications are subject to change without prior notice.
© Copyright ATZ 2016
Model : ATZ HDMI4K+VGA-EM100IR-TX
Description: HDMI4K/VGA over IP Transmitter with IR, RS-232, PoE/ LAN &
USB/KVM Extension
Connection Diagram:

pg. 12
Notes: - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only.
Photo attached is for reference only, it may be slightly varied in items of colour, shape from the actual item delivered from time to time.
All specifications are subject to change without prior notice.
© Copyright ATZ 2016
Model : ATZ HDMI4K+VGA-EM100IR-TX
Description: HDMI4K/VGA over IP Transmitter with IR, RS-232, PoE/ LAN &
USB/KVM Extension
Package Includes:
1× HDMI/VGA over IP Transmitter with USB/KVM Extension
1× IR Extender Cable
1× IR Blaster Cable
1× 5V/2.6A DC Power Adaptor
1× Operation Manual
Warranty: 2 Years
Warranty is effective from the date of original delivery.
This warranty shall be void if a serial number has been removed from the product.