AUDEIA PR101 User manual

MNPR101-R03EN
AUDEIA
PR101 /x
Advanced Audio Processor
USER MANUAL
Revision 3 – 201 Feb – EN – www.audeia.com

SAFETY PRECAUTION
AUDEIA - PR101 /X – USER MANUAL - EN
2
SIMBOLS
The lightning flash
with arrowhead
symbol (as the one in
the left) is intended to
alert the user to the
presence of dangerous
voltage within the
product enclosure that
may constitute a risk of
electric shock to person.
The exclamation point within an
equilateral triangle (as the one in the
left), is intended to alert the user to
the presence of important instruction
concerning the use of the appliance.
SAFETY INSTRUCTIONS
• Read these instructions
• eep these instructions
• Heed all warnings
• Trail all instructions
• Do not use this apparatus near
water
• Clear only with dry cloth
• Install in accordance with the
manufacturers instructions
• Do not install near any heat
sources such as radiators, heat
registers, stoves, or other
apparatus (including amplifiers)
that produce heat
• No naked flame sources, such as
lighted candles, should be placed
on the apparatus.
• Do not block any ventilation
openings.
• Do not defeat the safety purpose
of the polarized or grounding
type plug
• Ensures the source voltage
matches the voltage of the power
supply before turning ON the
apparatus.
• If the provided plug does not fit
into your outlet, consult an
electrician for replacement of the
obsolete outlet.
• Protect the power cord from being
walked on or pinched particularly
at the plug, convenience
receptacles, and the point where
they exit from the apparatus.
• Unplug this apparatus during
lightning storms or when unused
for long periods of time.
• There are maybe some areas with
high voltages inside, to reduce the
risk of electric shock, do not
remove any cover if the power
supply is connected. The cover

SAFETY PRECAUTION
AUDEIA - PR101 /X – USER MANUAL - EN
3
should be removed by qualified
personnel only. No user
serviceable parts inside.
• This apparatus shall not be
exposed to dripping or splashing
and that no objects filled with
liquids, such as vases, shall be
placed on this apparatus.
• To reduce the risk of fire or
electric shock, do not expose this
apparatus to rain or moisture.
• Only use attachments/accessories
specified by the manufacturer.
• Refer all servicing to qualified
personnel. To reduce the risk of
electric shock, do not perform any
servicing other than that
contained in the operating
instructions unless you are
qualified to do so.
• Servicing is required when the
apparatus has been damaged in
any way, such as the power
supply cord or plug is damaged,
liquid has been spilled or objects
have fallen into the apparatus, the
apparatus has been exposed to
rain or moisture, does not operate
normally, or has been dropped.
• Make sure to connect the
protective grounding to prevent
any electric shock before turning
ON the apparatus.
• The external wiring connected to
the output hazardous live
terminals requires installation by
an instructed person, or the use of
ready-made leads or cords.
• Never cut off the internal or
external protective grounding
wire or disconnect the wiring of
protective grounding terminal.
DISPOSAL OF ELECTRICAL AND
ELECTRONIC EQUIPMENT
• All the electrical and electronic
equipment should be disposed
separately from the municipal
waste via collection facilities
designed by the government or
local authorities.
• By disposing of electrical and
electronic equipment correctly
you help to save valuable
resources and prevent any
potential negative effects on
human health and the
environment.
• Improper disposal of waste
electrical and electronic
equipment can have serious effect
on the environment and human
health because of the presence of
hazardous substances in this type
of equipment.
• The waste electrical and electronic
equipment (WEEE) symbol, which
show a bin that has been crossed
out, indicates that electrical and
electronic equipment must be

SAFETY PRECAUTION
AUDEIA - PR101 /X – USER MANUAL - EN
4
collected and
disposed of
separately from
household waste.
• Return and collection systems are
available to end users. For more
detailed information about the
disposal of old electrical and
electronics equipment, please
contact your city office of waste
disposal service or the shop
where you purchased the
equipment.

CONTENTS
AUDEIA - PR101 /X – USER MANUAL - EN
5
SAFETY PRECAUTION
SIMBOLS .......................................... 2
SAFETY INSTRUCTIONS ............. 2
DISPOSAL OF ELECTRICAL
AND ELECTRONIC EQUIPMENT
............................................................ 3
INTRODUCTION
INCLUDED ITEMS ......................... 6
ABOUT THIS MANUAL ............... 6
LEGAL DISCLAIMER .................... 6
PRECAUTION FOR
INSTALLATION AND USE .......... 6
WARRANTY .................................... 7
INSTRUCTION
OVERVIEW ...................................... 8
FRONT PANEL ............................... 8
REAR PANEL .................................. 8
TECHNICAL DATA
7

INTRODUCTION
AUDEIA - PR101 /X – USER MANUAL – EN
6
Thank you for purchasing the
AUDEIA PR101 audio processor.
The PR101 is an innovative audio
processor obtained after a long
research within acoustical
controllable rooms to obtain
empirical and heuristics laws that
applied in accordance to analytical
and simulated elaborations give a
result that is over the conventional
systems. For the best use of the
PR101 processor please read this
user’s manual carefully, and keep it
in safe place for future reference.
INCLUDED ITEMS
Following are listed included items,
please contact the store where you
purchased this unit if any of listed
items are missing or have been
damaged during transportation.
• The PR101 unit
Q.ty 1
• AC power cord
Q.ty 1
• USB cable
Q.ty 1
• Owner’s manual (this manual)
Q.ty 1
ABOUT THIS MANUAL
This manual is composed of five
main section: “SAFETY
PRECAUTION” in witch there are
safety information and instructions;
“CONTENTS” with the table of
contents; “INTRODUCTION” a brief
description to introduce you in the
use of apparatus; “INSTRUCTION”
with technical information
concerning installation and usage;
“TECHINICAL DATA” with
thecnical specifics.
Each section name is printed on the
top side of the manual.
LEGAL DISCLAIMER
AUDEIA, RSS, and the other names
of apparatus or components are
trademarks or registered trademarks
of respective owner.
No part of this manual may be
reproduced or copied without write
permission of AUDEIA.
Technical specification and
appearance are subject to change
without notice.
PRECAUTION FOR
INSTALLATION AND USE
• The operating temperature should
be between 4°C and 36°C
• To prevent degrade of sound
quality and malfunction do not
install in places with significant
vibration, exposed to direct
sunlight, in extremely hot places,
in places with high humidity or

INTRODUCTION
AUDEIA - PR101 /X – USER MANUAL – EN
7
bad ventilation, places exposed to
rain or other water.
• Do not place anything on the unit
• Do not expose to fast reduction of
temperature because
condensation could occur with
possible damaging of the
apparatus. If this happen, leave
the unit for one or two hours
before turning the unit on.
• Avoid installing this unit on top
of any heat-generating devices as
power amplifiers also to avoid
condensation.
• To clean the unit, wipe it lightly
with a soft dry cloth. Do not wipe
with cleaning cloths, paint
thinner, benzene, athyl alcohol or
other agents. Tis could damage
the surface.
WARRANTY
To obtain Warranty Service, the
buyer should first fill out and return
the enclosed Warranty Registration
Card compiled in every parts within
10 days of the Purchase Date.
In case of return for any warranty
service, please make sure that the
product is well packed in its original
shipping carton, and it can protect
your unit from any other extra
damage.
Please provide a copy of your sales
receipt and give detail information
about your return address and
contact telephone number.
The warranty service is only
available to the original consumer,
who purchased this product directly
from the retail dealer, and it can not
be transferred.
The warranty does not apply to the
damages to this product that
occurred as the following conditions:
•Normal tear and wear.
•Any abuse or misuse of this
product, or use not in
accordance with this manual.
•The product has been altered
or modified in any way.
•Damage which may have been
caused either directly or
indirectly by external and
independent cause as other
products malfunctions, shocks,
and so on
•Abnormal service or repairing
by not authorized technicians.
•In no event shall AUDEIA be
liable for any incidental
damages (if not specifically
prescribed by the states laws).

INSTRUCTION
AUDEIA - PR101 /X – USER MANUAL – EN
OVERVIEW
The PR101/X processor is made with
the target to reduce or eliminate the
reverb in critical audio application.
This system is configurable by the
AUDEIA software: “EchoOff” that
implements the RSS (Reverb
Suppressor System) algorithm and
program the PR101 according to
specific parameter related to each
application. The system has four
stereo inputs and four stereo outputs
(also usable as eight input and eight
output mono channels). The outputs
work in “collaborative” manner, all
the outputs are components of a
unique complex sound generation.
The program generated by
“EchoOff” is made according to the
position of the speakers and to the
acoustical properties of each
ambience.
FRONT PANEL
In the front panel is located the
power switch (1), it is illuminated
when the system is powered and
switched on.
REAR PANEL
In the rear panel there are all the
connection interface. Following the
details:
(1) The power supply inlet;
(2) USB port to connect the device
to a PC for the programming;
(3) Height XLR jacks for audio
output channels
(4) Four jacks for audio output
channels.

INSTRUCTION
AUDEIA - PR101 /X – USER MANUAL – EN
9
The system is equipped with a
universal power supply compatible,
support 90-264VAC voltage range.
The power cord is equipped with
Speakon type connector to have a
sure and stable connection.
The PR101 is equipped with internal
fuse (inside to the electrical
transformer). The port connection for
programming is a standard USB
Type B connector. In the package
there is a cord for PC connection.
To use all the functionalities of the
system you have to install the
Audeia GUI software in your PC.
The software is free and supplied by
the reseller. The GUI has may
different software interface for
different application. When connect
the device to the PC automatically a
check was made to see if you device
is configured for the specific
application, if none it ask for a new
configuration of you device.
All the input and output connection
are balanced to ensure the maximum
level of quality and S/N ratio..

TECHNICAL DATA
AUDEIA - PR101 /X – USER MANUAL – EN
10
ECHNICAL SPECIFICS
GENERAL:
Power: 90-264VAC – 47-63 Hz
Power consumption: 20W max
Dimension (WxDxH): 483X240X44mm (17"x9,5"x1,7")
Weight: 3.2 kg (7.05lb)
Operating temperature range: 5-35°C/41-95°F
ANALOGICAL LINE INPUTS:
Number of channel: 4 balanced line input
Connector: XLR jack
ANALOGICAL LINE OUTPUTS:
Number of channel: 8 balanced line putput
Connector: XLR jack
USB INTERFACE:
Connector type: B type USB
AUDIO PERFORMANCES:
Frequency response: 20Hz – 20kHz +-0.5 dB
S/N Ratio input: min. 98dB
Dynamic range output: min. 104dB
Input THD+N at 5W/1kHz (Analog.): max. 0.080%
Output THD+N at 4V/1kHz (Analog.): max. 0.080%

TECHNICAL DATA
AUDEIA - PR101 /X – USER MANUAL – EN
11

www.audeia.com