Audio Technica EP3 User manual

wireless
wireless
wireless
wireless
wireless
EP3 In-E r Dyn mic He dphones
Écouteurs dyn miques «in-e r»EP3
Auricul res dinámicos de t pón EP3
wireless
wireless
wireless
wireless
wireless
EP3 In-E r Dyn mic He dphones
Écouteurs dyn miques «in-e r»EP3
Auricul res dinámicos de t pón EP3

WARNING!
Please read these warnings before using your headphones.To
ensure safety, observe all warnings while using this equipment.
• Do not disassemble or attempt to repair headphones.
• To prevent damage to your eardrums, never use the
headphones at excessive volume levels. Listening to
loud sounds for an extended period may cause
temporary or permanent hearing loss.
• Do not store the headphones in direct sunlight, near
heating devices or in hot, humid or dusty places.
• Do not subject the headphones to strong impact.
• Do not allow the headphones to become wet.
About EP3 In-E r Dyn mic He dphones
Thank you for purchasing Audio-Technica EP3 In-Ear
Dynamic eadphones.
Read these instructions before using the headphones,
and keep the manual for future reference.
Audio-Technica’s EP3 In-Ear Dynamic eadphones are
equipped with proprietary Audio-Technica dynamic drivers
offering a full frequency response and richly detailed
high-fidelity sound. The in-ear headphones come with three
sizes of rubber flexible earpieces and universal-fit foam tips
for custom fit, increased isolation and long-wearing
listening comfort.
2
EP3 Fe tures
•High-fidelity sound — Delivers an exceptionally pure
audio signal
•Ultra-compact design — In-ear design is ideal for
on-stage use
•Sound isolation — In-ear design forms an acoustic seal
for isolation from background noise
•Customized comfort — Soft interchangeable earpieces
(small, medium & large sizes, plus ear-conforming foam
tips) provide a truly custom fit
•Compact protective case — ard carrying case
protects in-ear headphones & accessories
•Soft pouch — Protective pouch provides additional
storage option
•Ad ustable Y cable — 1.1 m (3.6') Y cable includes an
adjustable sleeve for a secure, comfortable fit
•Locking mini-plug — Gold-plated stereo mini-plug with
locking collar provides exceptional corrosion resistance,
superb conductivity, secure connection
•Extension cable/adapter — Includes a 25 cm (9.8")
extension cable with a 3.5 mm mini-plug suitable for use
with MP3 and other portable players
Included Accessories
• Detachable 25 cm (9.8") extension cable/adapter with
gold-plated 3.5 mm (1/8") stereo mini-plug and jack
• Protective hard carrying case
• Soft pouch
• Replaceable earpieces (Small, Medium and Large)
• Ear-conforming foam tips
EP3 In-E r Dyn mic He dphones

Selecting your repl ce ble e rpieces nd checking fit
of the e rphones
Medium-sized rubber earpieces are attached to the ear-
phones at shipment. If these do not fit your ears, replace
them with the Small or the Large earpieces. It is important
to have the correct and comfortable fit; an incorrect fit will
degrade the audio function of your headphones.
Using your in-e r he dphones
1.Connect the headphone cable to the extension
cable/adapter if needed, making certain the plug is
firmly seated. (Use extension cable/adapter with
3.5 mm stereo mini-plug to connect to MP3, CD player,
DVD player, computer, and other audio devices
equipped with a 3.5 mm output jack.)
2.Connect the headphone cable (or extension cable) to
the headphone jack of your audio device.
3.Wear the left earphone (marked L) in your left ear, and
the right earphone (marked R) in your right ear. Insert
the earpiece on the earphone into your ear so it fits
snugly and comfortably. If fit is not correct, please see
Selecting your replaceable earpieces above. Do not
push beyond the ear canal opening.
W rning: Do not push the e rphone sleeve beyond the
e r c n l opening.
4. Wear the headphones over the ear with the Y cable
toward the front or back. Use the adjustable sleeve to
tighten the cable.
5. Turn on your audio device. (Volume should be set at a
low level at first; adjust as necessary on audio device.)
Check to make certain the headphones fit correctly and
that there is a good seal between the ear canal and the
rubber earpiece on your earphone; see Selecting your
replaceable earpieces above.
After using your in-e r he dphones
•After you have finished using your in-ear headphones,
store them in included protective carrying case.
• To clean the earphones, wipe with a clean, soft cloth.
Do not use solvents.
•For periodic cleaning of earpieces, remove from
earphones and wash with warm water. Make certain
earpieces are completely dry before reinstalling on
earphones. Check for any obstructions.
•Earpieces will wear over time. Replacement earpieces
are available from Audio-Technica dealers.
Specific tions*
Type Dynamic
Driver Diameter 11.5 mm
Frequency Response 18 – 18,000 z
Sensitivity 100 dB/mW
Impedance 32 ohms
Weight (without cable) 5 g (0.18 oz)
Cable 110 cm (3.6'), Y-type
Connector 3.5 mm TRS stereo
with locking collar
Accessories Extension cable/adapter with
3.5 mm connector; protective
hard carrying case; soft
pouch; interchangeable
earpieces (S,M,L); ear-con-
forming foam tips
*Specifications are subject to change without notice.
EN
3
Selecting your repl ce ble e rpieces nd checking fit
of the e rphones
Medium-sized rubber earpieces are attached to the ear-
phones at shipment. If these do not fit your ears, replace
them with the Small or the Large earpieces. It is important
to have the correct and comfortable fit; an incorrect fit will
degrade the audio function of your headphones.
Using your in-e r he dphones
1.Connect the headphone cable to the extension
cable/adapter if needed, making certain the plug is
firmly seated. (Use extension cable/adapter with
3.5 mm stereo mini-plug to connect to MP3, CD player,
DVD player, computer, and other audio devices
equipped with a 3.5 mm output jack.)
2.Connect the headphone cable (or extension cable) to
the headphone jack of your audio device.
3.Wear the left earphone (marked L) in your left ear, and
the right earphone (marked R) in your right ear. Insert
the earpiece on the earphone into your ear so it fits
snugly and comfortably. If fit is not correct, please see
Selecting your replaceable earpieces above. Do not
push beyond the ear canal opening.
W rning: Do not push the e rphone sleeve beyond the
e r c n l opening.
4. Wear the headphones over the ear with the Y cable
toward the front or back. Use the adjustable sleeve to
tighten the cable.
5. Turn on your audio device. (Volume should be set at a
low level at first; adjust as necessary on audio device.)
Check to make certain the headphones fit correctly and
that there is a good seal between the ear canal and the
rubber earpiece on your earphone; see Selecting your
replaceable earpieces above.
After using your in-e r he dphones
•After you have finished using your in-ear headphones,
store them in included protective carrying case.
• To clean the earphones, wipe with a clean, soft cloth.
Do not use solvents.
•For periodic cleaning of earpieces, remove from
earphones and wash with warm water. Make certain
earpieces are completely dry before reinstalling on
earphones. Check for any obstructions.
•Earpieces will wear over time. Replacement earpieces
are available from Audio-Technica dealers.
Specific tions*
Type Dynamic
Driver Diameter 11.5 mm
Frequency Response 18 – 18,000 z
Sensitivity 100 dB/mW
Impedance 32 ohms
Weight (without cable) 5 g (0.18 oz)
Cable 110 cm (3.6'), Y-type
Connector 3.5 mm TRS stereo
with locking collar
Accessories Extension cable/adapter with
3.5 mm connector; protective
hard carrying case; soft
pouch; interchangeable
earpieces (S,M,L); ear-con-
forming foam tips
*Specifications are subject to change without notice.
EN
3

Audio-Technic U.S., Inc.
1221 Commerce Drive, Stow, Ohio 44224 USA [phone]
Audio-Technic Limited
Old Lane, Leeds LS11 8AG England [phone]
Audio-Technic (Gre ter Chin ) Limited
Unit K, 9/F., Kaiser Est. (Ph.2) 51 Man Yue St. Kowloon, K.
[phone]
Audio-Technic (S.E.A.) Pte. Ltd.
623 Aljunied Road, #04-10, Aljunied Industrial Complex, Singapore 389835
[phone]
Audio-Technic T iw n Co., Ltd.
25-28 Colin, Chungli-city, Taoyuan-county, Taiwan 32050, R.O.C.
[phone]
Audio-Technic Corpor tion
2206, Naruse Machida, Tokyo Japan
www. udio-technic .com
©2008 Audio-Technica U.S., Inc.
Printed in U.S.A. Imprimé aux E.U. Impreso en EE. UU.
P52057