AudioBahn ALD80Q User manual

Controls and Functions
HEAD UNIT
Input/Output
ALD80Q
Input
Input Input
Output
ALD85Q
TWEETER
Heat unit + ALD80Q + ABD85Q + Amplifier
SUBWOOFER
Line out ports
LRLRLRLR
LR
LR
LRLRL R
S
U
B
W
O
O
F
E
R
O
U
T
P
U
T
H
I
G
H
P
A
S
S
O
U
T
P
U
T
10

Controls and Functions
HEAD UNIT
Output /Input
ALD80Q
Input
Input
Input
Input Output
CHANNEL1/2
CHANNEL3/4
SUBWOOFER
MID-RANGE
TWEETER
Heat unit + ALD80Q + AX380Q + Amplifier
AX380Q
M
i
d
R
a
n
g
e
O
u
t
p
u
t
H
i
g
h
P
a
s
s
O
u
t
p
u
t
S
u
b
w
o
o
f
e
r
O
u
t
p
u
t
LRLR
LR L R LRL R LRLRLRL R LR
11

Controls and Functions
HEAD UNIT
TWEETER
Input
Input Output
SUBWOOFER MID-RANGE
Line Out Ports
Heat Unit + AEX500Q + Amplifier
AEX500Q
 
S
U
B
W
O
O
F
E
R
O
U
T
P
U
T
HIGH PASS OUTPUT
MID RANGE OUTPUT
LRLRLRRR
LL
L R
L R LR
12

Controls and Functions

1. EQ ON / OFF SWITCH
This switch allows you to bypass the equalizer by setting the switch to the OFF position.
2. LINE OUT LEVEL CONTROL
Use these jacks to bypass a signal through to other processors or amplifiers.
3. INPUT LEVEL CONTROL
This level control is used to adjust the input sensitivity to match the radio's output.
4. SUBWOOFER CROSSOVER SELECTOR
By turning the selector you can choose from an infinite number of crossover points.
5. PHASE SHIFT CONTROL
Allows you to change the phase of your subwoofer from 0 to 180 to help compensate for timing differences
between drivers.
6. STEREO / MONO CONTROL
By turning this control clockwise to the "MONO" position, the subwoofer output changes from stereo to mono.
7. SUBWOOFER OUTPUT CLIPPING INDICATOR
This indicator will tell you if the subwoofer signal is clipping.
8. SUBWOOFER OUTPUT LEVEL CONTROL
By turning this control clockwise, you increase the subwoofer channel level.
9. MID-RANGE / HIGH-PASS FREQUENCY SELECTOR
By turning the dial, you can select a high-pass crossover point for mid-range output between 40Hz - 800Hz.
10. MID-RANGE / LOW-PASS FREQUENCY SELECTOR
By turning the dial, you can select a low-pass crossover point for the mid-range output between 2kHz - 7kHz.
11. MID-RANGE OUTPUT CLIPPING INDICATOR
This indicator will tell you if the mid-range signal is clipping.
12. MID-RANGE OUTPUT LEVEL CONTROL
By turning this control clockwise, you increase mid-range channel level.
13. HIGH-PASS CROSSOVER FREQUENCY SELECTOR
By turning the dial, you can select a high-pass crossover frequency from 400Hz - 8kHz.
14. HIGH-PASS OUTPUT CLIPPING INDICATOR
This indicator will tell you if the high-pass signal is clipping.
15. HIGH-PASS OUTPUT LEVEL CONTROL
By turning this control clockwise, you increase high-pass channel level.
16. BLUE DIGITAL LED VOLT METER
17. INPUT JACKS
Input left / right signal from the source unit here via RCA cable.
18. HIGH-PASS OUTPUT JACKS
Connect the RCA cable to the front channel amplifier input.
19. MID-RANGE OUTPUT JACKS
Connect the RCA cable to the rear channel amplifier input.
20. SUBWOOFER OUTPUT JACKS
Connect the RCA cable to the subwoofer channel amplifier input.
21. LINE OUT JACKS
To additional amplifiers or other processors.
22. REMOTE CONTROL JACK
Plug the modular cord connected to the remote control unit into this jack.

   
 



 

 




REMOTE CONTROL:
REMOTE OUTPUT
MID-RANGE
SUBWOOFER
TWEETER
Low Pass Level and Q Control
AX380Q
LEVEL
Q.
MAX
MIN 220
+
-


 
AX380Q
Connections


Connections

 
 
 



 

  



 
REMOTE CONTROL:
REMOTE OUTPUT
TWEETER
Low Pass Level and Q Control
AX380Q
LEVEL
Q.
MAX
MIN 220
+
-

 
REMOTE OUTPUT
M
ID-RANGE
SUBWOOFER
  
  
 
