AUDIOLINE 505 User manual

505
Two-way Speaker Telephone
Téléphone mains-libres
avec présentation du numéro
Telefon mit Freisprecheinrichtung
Telefono con vivavoce a due vie
Telefon z funkcją głośnomówiącą
English
French
German
Italian
Polish
User guide
Manuel d'utilisation
Bedienungsanleitung
Istruzioni per l’uso
Instrukcja obsługi
Downloaded from: http://www.guardianalarms.net

1 Hook switch
2 Hanger Hook for wall mounting
3 Programme Button
4 Redial Button
5 Speaker
6 Recall Button
7 Microphone
8 Speaker Button and LED
9 Speaker Volume Control
10 Erase/Mute Button
11 Message Indicator LED
12 OK Button
13 Scrolling Buttons (UP/DOWN)
14 Display
English (see page 4-15)

Français (voir pages 16-26)
1 Pédale de raccroché
2 Languette de support du combiné
(montage murale)
3 Touche Programmation
4 Touche Bis
5 Haut-parleur
6 Touche R
7 Micro
8 Touche Prise de Ligne Sans
Décrocher (PLSD ) et témoin
lumineux mains-libres
9 Réglage du volume du haut-
parleur
10 Effacer/touche Secret
11 Témoin lumineux de nouvel appel
reçu/ message sur messagerie
vocale sur le réseau*
12 Touche conrmation
13 Touches de délement
14 Afcheur
* sous réserve d’abonnement auprès
de votre opérateur
Deutsch (siehe Seite 27-33)
1 Gabel
2 Höreraufhängung
3 Programmierung
4 Wahlwiederholung
5 Lautsprecher
6 R-Taste
7 Mikrofon
8 Lautsprechertaste und Indikator
9 Lautstärkeregler für Lautsprecher
10 Löschen/Stummschalten
11 Nachrichtenanzeige
12 Bestätigen
13 Scroll-Tasten
14 Display
Italiano (vedere pagine 34-40)
1 Commutatore a gancio
2 Supporto di aggancio per il
microtelefono
3 Programmazione
4 Pulsante Ripetizione numero
5 Auricolare
6 Pulsante Recall (R)
7 Microfono
8 Pulsante LED e altoparlante
9 Controllo volume altoparlante
10 Pulsante Cancella/ Silenziamento
11 Indicatore di messaggi
12 Confermare
13 Pulsanti di scorrimento
14 Display
Polski (patrz strony 41-48)
1 Miejsce na słuchawkę
2 Wieszak na słuchawkę
3 Programowanie
4 Przycisk ponownego wybierania
5 Głośnik
6 Przycisk Recall (R)
7 Mikrofon
8 Przycisk głośnika/sygnalizatora
LED
9 Sterowanie natężeniem dźwięku
głośnika
10 Przycisk Kasowanie/Wyłączanie
mikrofonu
11 Wskaźnik wiadomości
12 Potwierdzenie
13 Przyciski przewijania
14 Wyświetlacz

English
4 www.doro.com
Installation
Batteries
In order for the Caller ID, memory and other functions to operate, the
telephone requires three good quality AAA 1.5V alkaline batteries to be
installed. If batteries are either not installed or running low, the symbol
will be visible in the display, you will need to change the batteries as soon
as possible.
The battery compartment is located on the underside of the telephone.
1. Ensure the telephone line cord is disconnected from the telephone network
wall socket.
2. Unscrew the retaining screw that holds the battery cover in place and
remove the cover.
3. Install the batteries ensuring the correct battery polarity is observed.
4. Replace the battery cover and ret the retaining screw.
Connection
Once the batteries have been installed:
1. Connect the curly cord to the handset and to the socket marked q on the
underside of the telephone.
2. Connect the telephone line cord to the socket marked T on the underside
of the telephone and then to a telephone network wall socket.
3. A click will be heard when the modular plug is correctly in place.
4. Position the cables in the grooves underneath the telephone.
5. Lift the handset and listen for the dial tone. Your telephone is now
operational.
Wall Mounting
1. Secure two screws, vertically positioned 100 mm apart.
2. The screws should locate into the two ‘keyholes’ on the back of the
telephone.
3. Remove the hanging peg (located by the hook switch) by pushing it upwards.
4. Rotate the hanging peg 180 degrees, and then replace it.
Alternatively this telephone can be mounted onto an existing telephone wall plate (Australia
only).

English
www.doro.com 5
Installation
Setting the Time and Date
1. Press and hold P until Setup is shown.
2. Press P again. Hour will ash.
3. Scroll to the desired setting using v/V.
4. Press 0. Minutes will ash.
5. Scroll to the desired setting using v/V.
6. Press 0. Date will ash.
7. Scroll to the desired setting using v/V.
8. Press 0. Month will ash.
9. Scroll to the desired setting using v/V.
10. Press P twice to save your settings.

English
6 www.doro.com
Operation
Speaker Function
1. Press s. The speaker will be activated and the LED indicator will
illuminate.
2. Dial the required telephone number. Adjust the volume control on the side
of the telephone.
3. Speak towards the microphone on the front edge of the telephone.
4. Press s to terminate the call.
Please note!
During the course of a telephone conversation, you can switch from hands free speaker to
handset mode at any time by picking up the handset. Replace the handset to terminate the call.
Please remember that in hands free speaker mode, only one person at a time can talk. The
switch over between speaker and microphone is automatic and dependant on the sound level on
the incoming line and the microphone respectively. It is therefore essential that no loud noise in
the immediate surroundings of the telephone, as this will disrupt the speaker function.
Hold Button
Press z to place an incoming call on hold.
The call can be resumed by pressing z again.
The display will ash and the handset microphone will be inoperative for as long
as the function is active.
Redial Button
The ve most recently dialled numbers can easily be redialled using r.
1. Press r repeatedly, to scroll through the numbers.
2. Press 0, the selected number will now be dialled.
During the course of a telephone conversation, you can switch from hands free
speaker to handset mode at any time by picking up the handset.

English
www.doro.com 7
Operation
Memory
This telephone has 10 indirect memories.
When a number is stored in a memory location, you need to press only two
buttons to make the call. The memories are stored on the keypad digits 0-9.
Storing Memories
1. Press and hold P until Setup is shown.
2. Enter a memory location 0-9 on the telephone keypad.
3. Enter the desired telephone number (up to 22 digits). Use C to erase or
change an entry.
4. Press 0. The number is now stored.
5. Enter another memory location to continue or press C to return to standby
mode.
Memory Dialling
1. Lift the handset (or press the s button) and wait for a dialling tone.
2. Press P.
3. Select a memory location by pressing the relevant keypad number, 0-9.
Press r. If you want a pause in the telephone number.
In case of a number change, store the new number in the location of the old one following
the procedure above.
Volume Control
The handset volume may be adjusted during a call using the switch located on
the handset.
The hands free speaker volume may be adjusted during a call using the switch
located on the right hand side of the base unit.
Ringer
The Ringer volume can be set to three modes – high, low or off – using the
switch located on the underside of the telephone.

English
8 www.doro.com
Operation
Timer
Approximately 5 seconds after dialling a timer will be shown on the display. The
timer helps you keep track of how long the call lasts.
Optional Network Services
Access to additional network services can be gained by using the recall button
R, * and # keys. Contact your network operator for more information.
Press the recall button R followed by the extension number to transfer calls
when connected to a PBX (TBR only).

English
www.doro.com 9
Caller Identication
Explanation of Caller ID (CID).
Caller ID allows you to see who is calling before you answer a call, and to see
who has called in your absence. If the number received is stored in the phone
book, that corresponding entry is shown as well.
Numbers received are logged and can easily be retrieved for review or dialling.
The call log will store up to 40 telephone numbers.
New calls are indicated by a ashing message indicator light. The display will
also indicate the number of calls both new and total received. The indicator will
stop ashing as soon as the new number(s) are reviewed.
When the log is full, the oldest number will be deleted automatically, as a new
call is logged.
Please note!
In order for numbers to be shown, the Caller ID service must be provided by your network
operator and a current subscription in place. Contact your operator for more information.
Dialling a number from CID.
1. Scroll to the desired telephone number using v/V.
2. Pick up the handset and press 0, the displayed telephone number will now
be dialled.
During the course of a conversation, you can switch from the hands free speaker to handset mode
at any time by picking up the handset.
Messages
Apart from telephone numbers, the display can show:
Unavailable It is an International call or a call from a PBX (no information
received)
Private The call is comes from a blocked number or a PBX.
Repeat Several calls have been received from this particular phone
number.
5 Message indication (sent from your network operator). In
addition, the 5 indicator ashes two times in sequence.
Please note!
The exact text message may differ from those shown above dependent on the text message
supplied by your telephone exchange.

English
10 www.doro.com
Caller Identication
Erasing Individual Numbers from CID
1. Scroll to the telephone number you wish to erase v/V.
2. Press C. The displayed number will begin ashing.
3. Press C again to conrm.
Erasing ALL numbers from CID
1. Scroll to the any telephone number in the CID list v/V.
2. Press and hold C until the display shows -00- CALLS .