Audiovox Electronics RVMPKG4 User manual

Rearview Mirror with 4" Color LCD Monitor
and Camera Package
Model: RVMPKG4 (V2.0)
User’s Manual
Features:
•Rearview Mirror with 4" LCD Monitor
•Built-In Speaker
•Rearview Camera Input
•Auxiliary Video Input
•Automatically Displays Backup Camera Image
•Camera

Warnings
1. The product is intended to assist in safe driving and to allow the driver
to have a broader rearview while in reverse. You, as the driver, are
solely responsible for the safe operation of your vehicle and the safety
of your passengers according to the country and their local traffic
regulations. Do not use any features of this system to the extent it
distracts you from safe driving. Your first priority while driving should
always be the safe operation of your vehicle. Audiovox Electronics
Corp. cannot accept any responsibility whatsoever for accidents
resulting from failure to observe these precautions or safety instructions.
2. You are advised not to display the auxiliary video input while driving.
This product must be installed and used only in accordance with these
instructions. Any alteration of this product that enables it to be used in
ways other than those stated in this manual could distract the driver and
result in an accident or injury. Audiovox Electronics Corp. disclaims
any liability that may result from a failure to install and operate as
indicated in this manuals.
Warning: Backing up vehicle
Do not back up vehicle while watching the mirror/monitor screen. Always
look in the direction of vehicle motion. Use the mirror/monitor as an aid in
safety confirmation. The actual distance is shorter than it looks in the monitor.
The range of image is limited. Beware of blind spots.
1

TABLE OF CONTENTS
Warnings 1
Product description 2
Functions & operations 3
Operations 4
Volume control 4
LCD monitor brightness control 4
Maintenance 5
Troubleshooting 5
Product Description
This Backup Camera/Monitor Package is designed to assist the driver by
providing a clear and wide image of the area behind the vehicle whenever the
vehicle is shifted into reverse. Never rely solely on this product to insure the
area is clear of children and or obstructions. Use your monitor and look both
ways. This is not intended to replace existing safety procedures, but add
another safety tool for your vehicle.
2

Figure 1
I. Function and Operations
Figure1 shows the function of rearview mirror.
A: Rearview mirror E: Speaker volume control
B: 4" LCD panel F: Auxiliary input switch (see below)
C: Brightness control knob G: Speaker in rear of mirror
D: Power indicator (Red when ignition is on)
Auxiliary Input Switch:
Auxiliary input switch: To access the 2nd A/V input press the switch.
Note: The parking brake must be engaged in order to view the 2nd input.
3

II. Operations
1. Normal operation:
The monitor will automatically display the rear observation
camera image whenever the vehicle is shifted into reverse gear.
The rear observation camera image turns off automatically any
time the gear selector is moved out of the reverse position.
2. How to play an auxiliary video/audio signal:
To play the auxiliary input, press the auxiliary input switch after th
vehicle’s parking brake is engaged (the auxiliary video/audio will
only work when the parking brake is enga
e
ged).
brightness.
III. Volume Control
The volume adjustment control is on the right side of the bottom of the
rearview mirror. Rotating the wheel to the right will decrease the sound
level. Rotating the wheel to the left will increase the volume.
.
IV. LCD Monitor Brightness Control
The brightness adjustment control is on the left side of the bottom of the
rearview mirror. Rotating the wheel to the right will decrease the
brightness. Rotating the wheel to the left will increase the
4

Maintenance
Though your Rearview mirror requires little care, you can still maintain its
condition and performance following the procedures below.
•Keep your system away from excessive moisture, extreme heat or cold
and magnetic fields.
•Keep liquids away from the display mirror.
•To avoid damage, do not place auxiliary devices or other objects on the
top of the mirror.
•Occasionally clean the surface of the mirror with soft cloth moistened
with water or window cleaner.
Troubleshooting
Symptoms Solutions
The ON/OFF signal light
<D> is not on after the car is
started?
1. Check the installation-wiring diagram.
2. Ensure that the parallel red and black line
from the control box is connected
properly.
No video signal appears
while reversing the car?
1. Check the LCD Contrast (Brightness)
control knob whether the contrast knob is
set too low
2. Check the rearview Camera lens.
3. Check the rearview Camera wiring and
connection.
4. Check the cable from the rearview mirror
is connected properly.
Video image is not sharp
enough? Clean the lens of the camera.
5

© 2007 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, N.Y. 11788
128-8145
6