Audiovox FPE1708DV - 17" LCD TV User manual

OWNER'S MANUAL
FPE1708DV
17” HD FLAT PANEL LCD TV
WITH BUILT-IN DVD PLAYER
FOR ASSISTANCE CALL CUSTOMER SERVICE AT 1-800-645-4994
OR VISIT US AT WWW. AUDIOVOX.COM 128-8325

E - 1
SAFETY PRECAUTIONS
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance(servicing)instructionsintheliterature
accompanying the appliance.
WARNING :TOREDUCE THE RISKOF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CAUTION
• DANGER OF EXPLOSION IF BATTERY IS
INCORRECTLY REPLACED. REPLACE ONLY
WITH THE SAME OR EQUIVALENT TYPE.
• TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT OF
WALL OUTLET, THEN FULLY INSERT.
• USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
WARNING :
• TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.DONOTPLACE OBJECTS FILLED
WITH LIQUIDS ON OR NEAR THIS UNIT.
• SHOULD ANY TROUBLE OCCUR,
DISCONNECT THE AC POWER CORD
AND REFER SERVICING TO A QUALIFIED
TECHNICIAN.
PLACEMENT INFORMATION
• Do not use this unit in places that are extremely
hot, cold, dusty or humid.
• Do not restrict the airflow of this unit by placing it
somewhere with poor airflow, by covering it with
a cloth, by placing it on bedding or carpeting.
SAFETY INFORMATION
• When connecting or disconnecting theAC power
cord, grip the plug and not the cord itself. Pulling
the cord may damage it and create a hazard.
• When you are not going to use the unit for a long
period of time, disconnect the AC power cord.
CONDENSATION INFORMATION
• When left in a heated room where it is warm and
damp, water droplets or condensation may form
insidetheequipment.When there is condensation
insidethe unit, the unit may not functionnormally.
Let the unit stand for 1-2 hours before turning the
power on or gradually heat the room and let the
unit dry before use.
RATING PLATE LOCATION
The rating plate is located on the rear of the unit.
FCC STATEMENTS
NOTE:Thisunithas beentestedandfoundtocomply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This unit generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordancewiththeinstructions,may cause harmful
interferencetoradiocommunication.However,there
is no guarantee that interference will not occur in a
particularinstallation.If this unit does cause harmful
interference to radio or television reception, which
canbedetermined by turning the unit offand on, the
user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the unit and
receiver.
- Connecttheunitintoanoutletonacircuitdifferent
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
WARNING: Changes or modifications to this unit
not expressly approved by the party responsible
for compliance could void the user authority to
operate the unit.
The symbol for Class II
(Double Insulation)
CAUTION
INVISIBLE LASER RADIATION WHEN
OPEN AND INTERLOCKS DEFEATED.
AVOID EXPOSURE TO BEAM
This product
contains a low
power laser device.
CLASS 1 LASER
PRODUCT
FPE1708DV_UL_IB_MSTAR+MTK_E1-20.indd 1FPE1708DV_UL_IB_MSTAR+MTK_E1-20.indd 1 4/17/2008 3:00:04 PM4/17/2008 3:00:04 PM

E - 2
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with a dry cloth.
7) Do not block any ventilation openings.
Install in accordancewith the manufacturer’s
instructions.
8) Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (Including amplifiers) that
produce heat.
9) Do not defect the safety purpose of the
polarized or grounding-typeplug.Apolarized
plug has two blades with one wider than the
other.Agrounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong is provided for your safety.
Iftheprovidedplug does not fit into your wall
outlet, consult an electrician for replacement
of the obsolete outlet.
10) Protect the power cordfrom being walked on
or pinched particularlyat plugs, convenience
receptacles, and the point where they exit
from the apparatus.
11) Only useattachments /accessoriesspecified
by the manufacturer.
12) Use only with the cart, stand,
tripod, bracket, or table
specified by the manufacturer,
or sold with the apparatus.
When a cart is used, use caution when
moving the cart / apparatus combination to
avoid injury from tip-over.
13) Unplug this apparatus during lightning
storms or when unused for long periods of
time.
14) Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as the power cord or plug is damaged,
liquid has been spilled or objects have
fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not
operate normally, or has been dropped.
MAINTENANCE
CLEANING THE DISC
A defective or soiled disc inserted into the unit can cause sound to drop out during
playback.
Handle the disc by holding its inner and outer edges.
• Do NOT touch the surface of the unlabeled side of the disc.
• Do NOT stick paper or tape on the surface.
• Do NOT expose the disc to direct sunlight or excessive heat.
• NEVER use solvents such as benzine or alcohol to clean the disc.
• Clean the disc before playback. Wipe the disc from the center outward with a cleaning cloth.
• Do NOT use irregular shaped discs (example : heart shaped, octagonal, etc.). They may cause
malfunctions.
CLEANING THE UNIT
• Be sure to turn the unit off and disconnect theAC power cord before maintaining the unit.
• Wipe the unit with a dry soft cloth. If the surfaces are extremely dirty, wipe clean with a cloth that has been
dipped in a weak soap-and-water solution and wrung out thoroughly. Wipe with a dry cloth.
• Never use alcohol, benzine, thinner, cleaning fluid or other chemicals. Do NOT use compressed air to
remove dust.
IMPORTANT NOTE
Before transporting the unit, remove the disc from the disc compartment.
FPE1708DV_UL_IB_MSTAR+MTK_E1-20.indd 2FPE1708DV_UL_IB_MSTAR+MTK_E1-20.indd 2 4/17/2008 3:00:05 PM4/17/2008 3:00:05 PM

E - 3
CONTENTS
SAFETY PRECAUTIONS .......................... 1
IMPORTANT SAFETY INSTRUCTIONS .......
...................................................................... 2
MAINTENANCE ........................................ 2
CONTENTS ............................................... 3
QUICK INSTALLATION ............................. 4
DISC FORMATS ........................................ 5
ACCESSORIES ......................................... 6
GETTING STARTED ................................. 6
CONTROL REFERENCE GUIDE ........ 7 – 9
CONNECTIONS .............................. 10 – 13
Connecting a TVAntenna / Cable / Satellite
............................................................... 10
Connecting an A / V Device .................. 10
Connecting Devices with a Composite
(Yellow RCA-Type) Video Output .......... 11
ConnectingDeviceswithaComposite(Yellow
RCA-Type) Video Input ......................... 11
Connecting a High-Definition (HD) Source
............................................................... 12
Connecting a PC .................................. 12
Connecting an Audio Amplifier ............. 13
POWER SUPPLY .................................... 13
Usingthe Power Cord .............................13
INSTALLATION ....................................... 14
Removing the base stand ................... 14
Mounting on the wall ............................. 14
USING HEADPHONES ........................... 15
UNIT OPERATION .................................. 15
SOUND SYSTEM .................................... 15
TV SETUP ........................................ 16 – 20
Picture menu ........................................ 16
Audio menu .......................................... 16
Time menu ............................................ 17
Setup menu ................................... 17 – 18
Parental menu ............................... 18 – 19
TV menu ............................................... 20
CD/DVD OPERATION ..................... 21 – 22
Playing a disc ........................................ 21
Playing a picture file disc .................... 21
Pausing playback (still mode) ............. 21
Stopping playback ................................. 21
Skipping to a different track ................ 21
Fast forward / fast reverse ................. 22
Slow-motion play (DVD) ....................... 22
Audio selection (DVD) ......................... 22
Subtitle selection (DVD) ....................... 22
Angle Selection (DVD) .......................... 22
SPECIAL FUNCTIONS ........................... 23
Display function (DVD) ......................... 23
Locating a specific title (DVD) ............ 23
Locating a specific chapter/track .......... 23
Locating a specific time ........................ 23
REPEAT PLAYBACK ...................... 23 – 24
Repeating a chapter (DVD) .................. 23
Repeating a single track (CD) .............. 24
Repeating a specific section (DVD) (CD) ...
................................................................24
DVD PROGRAMMABLE MEMORY ........ 24
Programmable memory ........................ 24
Title/chapterprogrammed playback (DVD) .
................................................................24
CUSTOMIZING THE DVD FUNCTION
SETTINGS ............................................... 25
Language setup .................................... 25
Video setup ........................................... 25
System setup ........................................ 25
TV display ......................................... 25
Default ................................................ 25
TROUBLE SHOOTING GUIDE ............... 26
FPE1708DV_UL_IB_MSTAR+MTK_E1-20.indd 3FPE1708DV_UL_IB_MSTAR+MTK_E1-20.indd 3 4/17/2008 3:00:06 PM4/17/2008 3:00:06 PM

E - 4
QUICK INSTALLATION
TURNING ON THE UNIT FOR THE FIRST TIME
The first time you turn on the unit, the unit will enter the setup mode. You can easily follow the prompt
message on the screen to complete basic TV settings.
1. Press the / button to select Yes. Press
the ENTER button to proceed with the initial
setup.
2. Use the / button to select Antenna, then
press the / button to select Air or CATV.
3. Use the / button to select Auto Scan, then press the button to enter auto scan menu. Use the /
button to select Start to Scan, press the button to begin scanning. (If you selected CATV on Step 2,
you need to select Cable System before Start to Scan). The system will automatically start to scan and
preset all available TV channels.
4. After scanning has finished the system will return to the first TV channel scanned.
Make sure the RF aerial has
been connected properly to the
TV ANTENNA input jack on the rear
of the system.
Whenyou turn on your television setfor the first
time,besuretoplaceiton a solid stable surface.
To avoid danger,donotexpose theTV to water,
or a heat source (e.g. lamp, candle, radiator).
Do not obstruct the ventilation grid at the rear
and be sure to leave sufficient gaps around the
unit as shown.
23/8"
"
8/77"8/32
FPE1708DV_UL_IB_MSTAR+MTK_E1-20.indd 4FPE1708DV_UL_IB_MSTAR+MTK_E1-20.indd 4 4/17/2008 3:00:06 PM4/17/2008 3:00:06 PM

E - 5
DISC FORMATS
NOTES ON COPYRIGHT
It is forbidden by law to copy, broadcast, show,
broadcastoncable,playin public or rent copyrighted
material without permission.
Apparatus Claims of U.S. Patent Nos. 6,836,549;
6,381,747; 7,050,698; 6,516,132; and 5,583,936
licensed for limited viewing uses only.
DVDsarecopyprotected,andany recordings made
from these discs will be distorted. This product
incorporates copyright protection technology that is
protected by method claims of certain U.S. patents
and other intellectual property rights owned by
Macrovision Corporation and other rights owners.
Use of this copyright protection technology must
be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses
only, unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly
is prohibited.
The unit can play:
DVDs
[8cm/12cm disc]
Audio CDs
[8cm/12cm disc] CD-R CD-RW
Compatible
REGION MANAGEMENT INFORMATION
Region Management Information: This unit is
designed and manufactured to respond to the
Region Management Information that is encoded
on DVDs. If the region number printed on the DVD
does not correspond to the region number of this
unit, this unit cannot play that disc.
The region number of this equipment is .
DISC FUNCTION OR OPERATION
THAT IS NOT AVAILABLE
When the symbol appears on the screen, it
indicates that the function or operation attempted
is not available at that time. This occurs because
the DVD manufacturer determines the specific
functions. Certain functions may not be available
on some discs. Be sure to read the documentation
provided with the DVD.
ICONS USED ON DVDs
Sample Icons:
Language selections for audio
Language selections for subtitles
Screen aspect ratio
Multiple camera angles
Region code indicator
NOTE
When playing back a CD-G (Graphics) or CD
EXTRA disc, the audio portion will be played, but
the graphic images will not be shown.
TITLES, CHAPTERS AND TRACKS
• DVDsaredividedinto“TITLES”and“CHAPTERS”.
If the disc has more than one movie on it, each
moviewouldbeaseparate“TITLE”.“CHAPTERS”
are sections of titles.
• AudioCDsaredivided into “TRACKS”.A“TRACK”
is usually one song on an Audio CD.
NOTE
Numbers identify each title, chapter and track on
a disc. Most discs have these numbers record on
them, but some do not.
NOTES ON UNAUTHORIZED DISCS
Youmaynotbeabletoplayback some DVDs on this
equipmentiftheywerepurchased from outside your
geographic area or made for business purposes.
FPE1708DV_UL_IB_MSTAR+MTK_E1-20.indd 5FPE1708DV_UL_IB_MSTAR+MTK_E1-20.indd 5 4/17/2008 3:00:07 PM4/17/2008 3:00:07 PM

E - 6
ACCESSORIES
Please check and identify the supplied accessories.
Remote control (with batteries) ...................................................................................................... x 1
GETTING STARTED
USING THE REMOTE CONTROL
• Point the remote control at the remote sensor located on the unit.
• When there is a strong ambient light source, the performance of the infrared remote sensor may be
degraded, causing unreliable operation.
• The recommended effective distance for remote operation is about 16 feet (5 meters).
TO INSTALL THE BATTERIES
1. Open the battery door.
Many universal remote controls have a “learning” feature. We recommend you use that feature to program
the remote control.
For any questions or problems related to programming a universal remote control, you must contact the
customer service department of the universal remote control manufacturer for assistance, or refer to the
instructionsincludedwith the universal remote control. We cannot offer assistance in programming universal
remote controls.
BATTERY REPLACEMENT
When the batteries become weak, the operating distance of the remote control is greatly reduced and you
will need to replace the batteries.
CAUTION: Danger of explosion if battery is incorrectly replaced.
NOTES
• If the remote control is not going to be used for a long time, remove the batteries to avoid damage caused
by battery leakage corrosion.
• Do not mix old and new batteries. Do not mix ALKALINE, standard (CARBON-ZINC) or rechargeable
(NICKEL-CADMIUM) batteries.
• Always remove batteries as soon as they become weak.
• Weak batteries can leak and severely damage the remote control.
2. Insert 2 “AAA” batteries.
WARNING : Do not dispose of batteries in a fire. Batteries may explode or leak.
FPE1708DV_UL_IB_MSTAR+MTK_E1-20.indd 6FPE1708DV_UL_IB_MSTAR+MTK_E1-20.indd 6 4/17/2008 3:00:07 PM4/17/2008 3:00:07 PM

E - 7
CONTROL REFERENCE GUIDE
1. STANDBY / ON button
Press to turn ON the unit or put it in
STANDBY (OFF) mode.
2. TV button
Press to switch to TV mode.
DVD button
Press to switch to DVD mode.
AV button
Press to switch to source connected toAV
IN.
HD button
Press to switch to source connected to
YUV IN (component).
3. Number (0 - 9) buttons
4. • [dot] button
Usetoenter digitalsub-channels.(i.e. 11.3
or 12.7)
5. MENU button
Press to display the on-screen TV menu.
6. VOLUME (- / +) buttons
Press to adjust the volume level.
7. CURSOR ( , , , ) buttons
Press to highlight selections on a menu
screen and adjust certain settings.
ENTER button
Press to confirm selections on a menu
screen.
8. / buttons
: Fast reverse playback.
: Fast forward playback.
9. PREV button
Presstoselect previouschapters or tracks
on a disc.
10.SUBTITLE button
Presstoselectoneofthesubtitlelanguages
programmed on a DVD.
11. ANGLE button
Press to switch the camera angle of the
video presentation when scenes with
multiple camera angles are recorded on
a DVD.
12.TITLE button
Press to show the Title menu.
13.GOTO button
Press to skip directly to a specific location
on a DVD/CD.
14.MEMORY button
Press to set predetermined playback.
CLEAR button
Press to clear input selections.
15.MTS button
Press to switch between MONO sound,
STEREO sound and Secondary Audio
Program (SAP).
CC button
Press to activate the Closed Captioning
feature. This function only works on
programs broadcasted with captions.
16.EXIT button
Press to exit the TV SETUP menu and
return directly to normal viewing.
SLEEP button
Presstoset the SLEEPtimer. The unitwill
remain on for the time that is set, and will
automatically shut off afterwards.
FPE1708DV_UL_IB_MSTAR+MTK_E1-20.indd 7FPE1708DV_UL_IB_MSTAR+MTK_E1-20.indd 7 4/17/2008 3:00:07 PM4/17/2008 3:00:07 PM

E - 8
CONTROL REFERENCE GUIDE
17.FUNCTION button
Press to switch betweenTV / DVD /AV IN
/ YUV IN / PC IN.
18.LAST CH button
Press to switch repeatedly between the
last two channels displayed.
19.MUTE button
Press to turn off the sound.
20.CH / CH buttons
Press / to change the channels.
21.NEXT button
Press to select the next title, chapter or
track on a disc.
22. button
Press to stop playing a disc.
Press to go to a folder list of picture file
list.
PLAY button
Press to start and resume playback of a
disc.
PAUSE button
Press to pause playback and single frame
advance.
23.AUDIO button
Press to select audio soundtracks on
a DVD or change the output mode of a
CD.
24. SLOW button
Press to perform slow forward playback of
a DVD.
25.DVD MENU button
Press to enter the main menu of the
DVD.
26.SETUP button
Press to enter and exit the SETUP menu
of the DVD.
27.A-B button
Press to perform point-to-point repeat
playback on a DVD or CD.
REPEAT button
Press to repeat a chapter or title of a
DVD.
Press to repeat a single track or whole
CD.
28.DISPLAY button
Press to change disc status information
displayed on the screen.
SOUND button
Press to select from preset sound settings
tomatchthetypeof showyouarewatching.
(Standard / Personal / Music / Movie)
29.LCD MODE button
Press to set size of LCD display.
PICTURE button
Select from preset screen display settings
tomatchthetypeof showyouarewatching.
(Personal / Soft / Movie / Standard)
FPE1708DV_UL_IB_MSTAR+MTK_E1-20.indd 8FPE1708DV_UL_IB_MSTAR+MTK_E1-20.indd 8 4/17/2008 3:00:08 PM4/17/2008 3:00:08 PM

E - 9
CONTROL REFERENCE GUIDE
1. Color LCD Screen
2. button
Turns the unit on and off.
3. PLAY button
Press to start or resume playback of a disc.
4. STOP button
Press to stop playing a disc.
5. MENU button
Press to display the on-screen TV menu.
6. FUNCTION button
Select TV / DVD / AV IN / YUV IN / PC IN.
7. CH buttons
SelectsaTVchannelandhighlightselections
(Up & Down) on the menu screen.
button
Press PREV button to go back to previous
chapters/tracks.
Press and hold to fast reverse playback.
button
Press NEXT button to advance chapters/
tracks.
Press and hold to fast forward playback.
8. – VOLUME + controls
Adjusts the volume level and highlight
selections (Left & Right) on the menu
screen.
9. Speakers
10. Disc Door
11. PUSH OPEN button
Push to open the disc door.
12. Removable stand
13. Remote Sensor
Donotblockthissensorortheremotecontrol
will not work.
14. AC Power Cord
15. AV OUT Video Output Jack
16. AV OUT Audio Output Jacks (Left/Right)
17. AV IN Video Input Jack
18. AV IN Audio Input Jacks (Left/Right)
19. PC IN MONITOR/VGA Jack
20. PC IN Audio Jack
21. YUV IN Component Video Input Jacks
(Y/PB/PR)
22. YUV IN Audio Input Jacks (Left/Right)
23. AV IN S-Video Input Jack
24. Headphone Jack
25. TV Antenna Cable Terminal - Coaxial TV
Antenna Input
14 15 16 17 18
25242322212019
FPE1708DV_UL_IB_MSTAR+MTK_E1-20.indd 9FPE1708DV_UL_IB_MSTAR+MTK_E1-20.indd 9 4/17/2008 3:00:08 PM4/17/2008 3:00:08 PM

E - 10
CONNECTIONS
CONNECTING A TV ANTENNA / CABLE / SATELLITE
To view television channels correctly, a signal must be received from one of the following sources:
- An indoor or outdoor aerial antenna
- A cable system
- A satellite system
CONNECTING AN A/V DEVICE
To connect to other equipment such as a VCR, camcorder, satellite system or cable, etc.
NOTE
Please refer to the user manual
for the other equipment for more
information.
To AUDIO
IN jacks
(AV IN)
To S-VIDEO
IN jack
Connecting a Digital
Antenna
ThetunerinthisTVreceivesATSC
TV signals from an antenna.
This digital TV can receive
standard (SDTV) and high
definition (HDTV) over the air
broadcasts.
Connecting an Analog
Antenna or Device
The tuner in this TV receives
NTSC TV signals, analog cable
signals or the RF output from a
satellite receiver, VCR or cable
box.
To S-VIDEO OUT /
AUDIO OUT jacks
Satellite, cable or TV
antenna cable to TV
ANTENNA terminal
(cable not included)
Connecting to a VCR /
Camcorder / Satellite
System / Cable
ConnecttheAUDIO andS-VIDEO
cable (not included) as shown.
Make sure you connect the cable
fromtheother equipment (AUDIO
OUT and S-VIDEO OUT) to this
unit (AUDIO IN and S-VIDEO
IN).
FPE1708DV_UL_IB_MSTAR+MTK_E1-20.indd 10FPE1708DV_UL_IB_MSTAR+MTK_E1-20.indd 10 4/17/2008 3:00:08 PM4/17/2008 3:00:08 PM

E - 11
CONNECTIONS
CONNECTING DEVICES WITH A COMPOSITE (YELLOW RCA-TYPE) VIDEO
OUTPUT
To connect A/V devices such as a VCR, video game system or camcorder.
Connecting to a VCR / Video Game System / Camcorder
Connect the AUDIO / VIDEO cable (not included) as shown.
Make sure you connect the cable from the other equipment (AUDIO and VIDEO OUT) to this unit (AUDIO
and VIDEO IN).
NOTE
Please refer to the user manual for the other equipment for more information.
To AUDIO
/ VIDEO IN
jacks
(AV IN)
To AUDIO / VIDEO
OUT jacks
CONNECTING DEVICES WITH A COMPOSITE (YELLOW RCA-TYPE) VIDEO
INPUT
To connect A/V devices such as a VCR, PVR or camcorder.
Connecting to a VCR /
PVR / Camcorder
Connect the AUDIO / VIDEO
cable (not included) as shown.
Make sure you connect the
cable from the other equipment
(AUDIO and VIDEO IN) to this
unit (AUDIO and VIDEO OUT).
NOTE
Please refer to the user manual
for the other equipment for more
information. To AUDIO
/ VIDEO
OUT jacks
To AUDIO / VIDEO IN jacks
FPE1708DV_UL_IB_MSTAR+MTK_E1-20.indd 11FPE1708DV_UL_IB_MSTAR+MTK_E1-20.indd 11 4/17/2008 3:00:09 PM4/17/2008 3:00:09 PM

E - 12
CONNECTIONS
CONNECTING A HIGH-DEFINITION (HD) SOURCE
High-Definition (HD) Devices with component video output must be connected to the YUV input.
Connect the component video cable and audio cable (not included) as shown.
Makesureyouconnectthecomponentvideocableandaudiocablefromtheotherequipment(COMPONENT
VIDEO OUT and AUDIO OUT) to this unit (COMPONENT VIDEO IN and AUDIO IN - YUV IN).
NOTE
WhenconnectingaDVDplayertothetelevision,the picture resolution is solely dependent upon the resolution
supported by the DVD player attached. DVD player resolutions vary from 480i to 1080i, and this unit can
support DVD players up to a maximum resolution of 1080i.
To AUDIO
IN jacks
(YUV IN)To AUDIO
OUT jacks
To COMPONENT
VIDEO IN jacks
(YUV IN)
To COMPONENT
VIDEO OUT jacks
* May require a subscription
for receiving HD channels.
Check with your cable/
satellite service provider for
details.
CONNECTING A PC
Connect the 15-pin D-SUB PC/VGA connector from your computer to the 15-pin D-SUB PC/VGA input on
this unit using a monitor cable and an audio cable (not included) as shown.
Make sure you connect the
cable from the computer (PC
Connector and AUDIO - PC
OUT) to this unit (MONITOR /
VGA and AUDIO - PC IN).
To AUDIO jack (PC OUT)
To PC connector
FPE1708DV_UL_IB_MSTAR+MTK_E1-20.indd 12FPE1708DV_UL_IB_MSTAR+MTK_E1-20.indd 12 4/17/2008 3:00:09 PM4/17/2008 3:00:09 PM

E - 13
CONNECTIONS
CONNECTING AN AUDIO AMPLIFIER
This connection allows you to use an audio amplifier and external speakers.
Connect the AUDIO cable (not included) as shown.
Make sure you connect the cable from the other equipment (AUDIO IN) to this unit (AUDIO OUT).
To AUDIO OUT jacks
To AUDIO IN jacks
POWER SUPPLY
CONNECT THE POWER CORD
• Connect the AC power cord into a wall outlet.
• Press the STANDBY/ON button on the left of unit or remote control to turn on the unit.
Note:
• Be sure the AC power cord is disconnected and all functions are off before making connections.
• Make sure that all the components are connected correctly.
• To prevent electrical shock, match wide blade of plug to wide slot of wall outlet, then fully insert.
• When you are not going to use the unit for a long period of time, disconnect the power cord.
FPE1708DV_UL_IB_MSTAR+MTK_E1-20.indd 13FPE1708DV_UL_IB_MSTAR+MTK_E1-20.indd 13 4/17/2008 3:00:10 PM4/17/2008 3:00:10 PM

E - 14
INSTALLATION
MOUNTING ON THE WALL
This unit is VESA-compliant, and is designed to be wall-mounted with a VESA-compliant 3 15/16” x 3 15/16”
(100mm x 100mm) mounting kit designed for flat-panel TVs (sold separately). Mount this unit according to
the directions included with the mounting kit.
NOTE
Remove the base stand before mounting the unit on the wall.
REMOVING THE BASE STAND
WARNING: The LCD Display is very fragile, and must be protected at all times when removing the base
stand. Be sure that no hard or sharp object, or anything that could scratch or damage the LCD display,
comes into contact with it. Do NOT place pressure on the front of the unit at any time because the screen
could crack.
1. Disconnect any cables or cords connected to the unit.
2. Lay the unit down on a flat surface, so the backside is facing up, making sure to place a soft cushioned
material (such as a pillow or thick piece of foam) beneath the screen.
3. Remove the four screws and then remove the BASE STAND from the TV.
FPE1708DV_UL_IB_MSTAR+MTK_E1-20.indd 14FPE1708DV_UL_IB_MSTAR+MTK_E1-20.indd 14 4/17/2008 3:00:11 PM4/17/2008 3:00:11 PM

E - 15
USING HEADPHONES
• Turn down the volume before
connectingheadphones to the
unit, then adjust the volume to
your desired level.
• When headphones are
connected,nosoundwillcome
from the front speakers.
NOTE
Avoid listening to sound at high
levels for prolonged periods of
time. This may be harmful to you
and may cause hearing loss.
Headphones
(1/8” [3.5mm diameter plug)
TURNING THE UNIT ON
When the AC power adapter is connected, press the STANDBY/ON button on the
left of the unit to turn it on. Press the FUNCTION button to select the desired mode
(TV / DVD / AV IN / YUV IN / PC IN). If you select DVD, the DVD logo will appear on
the screen.
NOTE
Whenthe unit is notgoing to be usedfor a long time,disconnect theAC power adapter
from AC power outlet.
DOLBY DIGITAL (FOR DVD)
Dolby Digital is a sound system developed by Dolby Laboratories Inc. This unit automatically recognizes
DVDs that have been recorded with Dolby Digital.
Not all Dolby Digital sources are recorded with 6 channels.
Some sources marked Dolby Digital may be recorded in Dolby Surround, a 2 channel system. Look for this
logo on your unit.
Manufactured under license from Dolby Laboratories.
‘Dolby’ and the double-D symbol are trademarks of Dolby Laboratories.
UNIT OPERATION
SOUND SYSTEM
FPE1708DV_UL_IB_MSTAR+MTK_E1-20.indd 15FPE1708DV_UL_IB_MSTAR+MTK_E1-20.indd 15 4/17/2008 3:00:11 PM4/17/2008 3:00:11 PM

E - 16
TV SETUP
PICTURE MENU
1. Press the MENU button.
2. Press the button to enter PICTURE settings.
3. Use the or button to select the options (Picture
Mode, Contrast, Brightness, Sharpness, Tint or
Color). Adjust them using the or button (Screen
will change to your desired setting).
4. Repeat step 3 to adjust other options.
5. To exit the MAIN MENU and returntothenormal screen,
press the EXIT or MENU button repeatedly.
Note: Some setting items on the menu screen may not activate depending on what mode the unit is
currently in (TV/AV in/YUV in/PC in/DVD mode).
Picture Mode : Select from preset screen display settings to match the type of show you are watching
(Standard,Soft,Movie and Personal). Select Personal mode torecall your custom settings
on contrast, brightness, sharpness, tint and color.
Contrast : Adjust to sharpen the picture quality. The black portions of the picture become richer in
darkness and the white become brighter.
Brightness : Adjust the brightness of the picture. Brighten or darken the whole picture.
Sharpness : Adjust the sharpness level to improve detail in the picture.
Tint : Adjust the tint of the picture. (toward purple / toward green)
Color : Adjust the color of the picture.
AUDIO MENU
1. Press the MENU button.
2. Use the or button to select AUDIO, then press the
button to enter the AUDIO settings.
3. Use the or button to select the options (Sound
Mode, Bass, Treble, Balance, Audio Language or
MTS). Adjust them using the or button.
4. Repeat step 3 to adjust other options.
5. To exit the MAINMENU and return to the normalscreen,
press the EXIT or MENU button repeatedly.
Sound Mode : Select from preset sound settings (Standard, Music, Movie or Personal) to match the
type of show you are watching. Select Personal mode to recall your custom settings
on bass, treble and balance.
Bass : Adjust the bass range.
Treble : Adjust the treble range.
Balance : Adjust the balance level toward the left or right speakers.
Audio Language : Select from English / Spanish / French. (Availablefordigital channels if multiple audio
languages are broadcasted.)
MTS (Multi Channel Television Sound) : Select Stereo / SAP (Secondary Audio Program) / Mono.
NOTE
Experiment with different sound settings until you find the
settings you prefer.
NOTE
The SAP (Secondary Audio Programs) feature allows a TV station to broadcast other information, which
could be audio in another language.
FPE1708DV_UL_IB_MSTAR+MTK_E1-20.indd 16FPE1708DV_UL_IB_MSTAR+MTK_E1-20.indd 16 4/17/2008 3:00:12 PM4/17/2008 3:00:12 PM

E - 17
TV SETUP
TIME MENU
1. Press the MENU button.
2. Use the or button to select TIME, then press the
button to enter the TIME settings.
3. Use the or button to select the options (OSD
Duration, Sleep Timer, Time Zone or Day Saving
Time).Adjust them using the or button.
4. Repeat step 3 to adjust other options.
5. To exit the MAIN MENU and return to the normal
screen, press the EXIT or MENU button repeatedly.
OSD (On Screen Display) Duration : Select the length of time for the On screen menu is displayed : 15
Sec / 30 Sec / 45 Sec / 60 Sec.
Sleep Timer : Select the length of time before the unit automatically changes to Standby mode : Off
-> 5 Minutes -> 10 Minutes -> 15 Minutes -> 30 Minutes -> 60 Minutes -> 90 Minutes
-> 120 Minutes -> Off.
Time Zone : Select the time zone from Eastern / Central / Mountain / Pacific / Alaska / Hawaii.
Day Saving Time : Select On to activate daylight savings time.
Clock : Display the current time.
SETUP MENU
1. Press the MENU button.
2. Use the or button to select SETUP, then press the
button to enter the SET UP settings.
3. Use the or button to select the options (OSD
Language, Color Mode, PC Set Up, Closed Caption
or Restore Setting). Adjust them using the or
button (Screen will change to your desired setting); or
press the button to go into the detailed settings.
4. Press the MENU button to return to the previous
menu.
5. Repeat steps 3 and 4 to adjust other options.
6. To exit the MAIN MENUandreturntothenormalscreen,
press the EXIT or MENU button repeatedly.
OSD (On Screen Display) Language : Select On-screen menu language from English / French /
Spanish.
Color Mode : Adjust the three color temperature of the picture. Choose from Normal (balanced),
Warm (red white), or Cool (blue white) modes.
Restore Setting : If you reset the TV to the factory settings, all your present settings on PICTURE and
AUDIO will be erased and replaced by the factory’s default settings.
FPE1708DV_UL_IB_MSTAR+MTK_E1-20.indd 17FPE1708DV_UL_IB_MSTAR+MTK_E1-20.indd 17 4/17/2008 3:00:12 PM4/17/2008 3:00:12 PM

E - 18
TV SETUP
PC Set Up (in PC mode only)
- Resolution : 1,440 x 900 max
- Refresh Frequency : 60Hz max
H - Pos : Center the image by moving it left or
right.
V - Pos : Center the image by moving it up or
down.
Clock : Adjusts the display clock to change
width of the image.
Phase : Adjusts the image if there is flicker of
screen letters, color misalignment, or
blurring.
Auto Adjust : Adjust the image automatically.
Closed Caption
CC Mode : Select closed caption On, Off or CC on Mute.
Analog Closed Caption : Select the analog closed caption or turn it off.
Digital Closed Caption : Select the digital closed caption or turn it off.
Digital Caption Style : Select as Broadcaster to use the default digital caption style of the broadcaster.
Select Custom to activate the caption style items and set your desired detailed
settings.
NOTE
This function only works on ATSC
programs broadcast with captions.
PARENTAL MENU
Password
1. Press the MENU button.
2. Use the or button to select PARENTAL, then
press the button to enter the PARENTAL settings.
The menu locked screen will be displayed.
3. Enter a 4-digit password. Once entered, the screen
will enter the Parental menu. The preset password is
0000.
If you forget the password,
enter “ 8888 “ to unlock parental
control.
FPE1708DV_UL_IB_MSTAR+MTK_E1-20.indd 18FPE1708DV_UL_IB_MSTAR+MTK_E1-20.indd 18 4/17/2008 3:00:13 PM4/17/2008 3:00:13 PM

E - 19
TV SETUP
Rating Enable : Select On to edit the following parental items. Select Off to disable parental control.
US : Set TV and MPAA ratings.
Canada : Set Canada English and Canada French ratings.
RRT Setting : Set Rating Region Table.
Reset RRT : Reset Rating Region Table to the default settings.
Parental
1. Usethe or buttontoselect various Parental settings.
Adjustthem using the or button,orpress the button
to go into the detailed settings.
2. Press the MENU button to return to the previous menu.
3. Repeat steps 1 - 2 to adjust other options.
4. To exit the MAIN MENU and return to the normal screen,
press the EXIT or MENU button repeatedly.
TV-Y : Recommended for all children.
TV-Y7 : Recommended for all children age 7 and above.
TV-G : General Audience.
TV-PG : Parental Guidance Suggested.
TV-14 : Parental Strongly Cautioned.
TV-MA : Mature Audience Only.
N/A : Not rated.
G : GENERALAUDIENCES, Suitable for all ages.
PG : PARENTALGUIDANCE SUGGESTED - Some material may not be suitable for
children.
PG-13 : PARENTS STRONGLY CAUTIONED - Some material may be inappropriate for
children under 13.
R : RESTRICTED, Under 17 requires accompanying parent or adult guardian for
viewing in movie theaters.
NC-17 : No one 17 or under admitted in movie theaters,
X : Adults Only.
E : Exempt.
C : Children.
C8+ : Recommended for children age 8 and older.
G : GENERALAUDIENCES, Suitable for all ages.
PG : PARENTALGUIDANCE SUGGESTED - Some material may not be suitable for
children.
14+ : Viewers 14 years and older.
18+ : Adult Programming.
E : Exempt.
G : GENERALAUDIENCES, Suitable for all ages.
8 ans+ : Not recommended for young children.
13 ans+ : Not suitable for children under the age of 13.
16 ans+ : Not suitable for children under the age of 16.
18 ans+ : Adult Programming.
U.S.
MPAA
Ratings
U.S. TV
Ratings
Canadian
English
Ratings
Canadian
French
Ratings
Change Password : Enter the old password (the preset
password is 0000 if you did not
changeit),thenenternewpassword
and confirm it.(Remember your
password!)
FPE1708DV_UL_IB_MSTAR+MTK_E1-20.indd 19FPE1708DV_UL_IB_MSTAR+MTK_E1-20.indd 19 4/17/2008 3:00:14 PM4/17/2008 3:00:14 PM