Aurora Multimedia ASP-HTV User manual
ASP-HTV
HDMI/DVI to VGA Converter
User Manual
Manual Number: 100902
~ 1 ~
SafetyandNotice
The ASP-HTV has been tested for conformity to safety regulations and requirements, and has been certified for
international use. However, like all electronic equipments, the ASP-HTV should be used with care. Please read and follow
the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
zFollow all instructions and warnings marked on this unit.
zDo not attempt to service this unit yourself, except where explained in this manual.
zProvide proper ventilation and air circulation and do not use near water.
zKeep objects that might damage the device and assure that the placement of this unit is on a stable surface.
zUse only the power adapter and power cords and connection cables designed for this unit.
zDo not use liquid or aerosol cleaners to clean this unit.Always unplug the power to the device before cleaning.
Warning!
Thisdeviceisservedpurelyforconversionbetweenvideoformats.
ThisdeviceCANNOTconverttheinput/outputvideoresolutions.
~ 2 ~
This ASP-HTV HDMI/DVI to VGA/Component & Audio Converter offers an easy and instant approach for converting
digital HDMI to analog PC video (VGA) and component video (YPbPr) with digital audio (S/PDIF) and analog stereo audio.
With this module, YPbPr/VGA based receivers such as LCD monitors or plasma TV can be readily connected to HDMI
sources such as DVD players or PS3. In addition, the embedded HDMI / DVI selector facilitates the switch between the
HDMI and DVI input sources. This cost effective solution let you keep using your non-HDMI/DVI display to access HDMI or
DVI source, and enjoy high definition digital video and audio.
Features
zHDMI 1.2a & DVI 1.1 compliant
zHDMI video supports up to 1080p
zSupport HD (1080i / 720p) component video output
zSupport up to UXGA(1600x1200@60) & WUXGA(1920x1200@60) PC graphics output
zCoaxial S/PDIF audio output
zStereo analog audio output
zFront panel LED indicators and push button
zEDID learning ability
Introduction
VGAmonitor
HDMI source
DVI source
DVI cable
HDMI cable ASP-HTV
HDTV
YPbPr or VGAdisplay/projector
VGA cable
YPbPr cable
Analog PC Speaker
S/PDIF AV Amplifier
VGA-to-YPbPr
breakout cable
RCA audio cable
Earphone audio cable
~ 3 ~
Specifications&PackageContents
Model Name ASP-HTV
Technical
Role of usage D/Aconverter
HDMI compliance HDMI 1.2a
DVI compliance DVI 1.1
Video bandwidth Single-link 165MHz [4.95Gbps]
Video support Up to 1080p60, WUXGA[1920x1200@60] & UXGA[1600x1200@60]
Audio support Stereo audio
Input TMDS signal 1.2 Volts [peak-to-peak]
Input DDC signal 5 Volts [peak-to-peak,TTL]
Input 1x HDMI
1x DVI
Output 1x VGA/Component (through VGA-component breakout cable)
1x RCAdigital audio
1x 3.5mm analog audio
HDMI connector TypeA[19-pin female]
DVI connector DVI-I [29-pin female digital only]
VGAconnector HD-15 [15-pin D-sub female]
RCAconnector Coaxial socket for S/PDIF digital stereo audio [PCM 48kHz]
3.5mm connector Earphone socket for analog stereo audio
Push-in button [1] HDMI/DVI input switch / [2] VGA/component output switch
DIP switch 2-pin for EDID learning
Mechanical ASP-HTV
Housing Metal enclosure
Dimensions
[Lx W x H]
Model 128 x 100 x 28mm [5.0”x3.9”x1.1”]
Package 270 x 175 x 80mm [10.6”x6.9”x3.1”]
Carton 450 x 370 x 300mm [1’6”x1’3”x1’]
Weight Model 420g [15oz]
Package 795g [1.8 lbs]
Fixedness Wall-mounting case with screws
Power supply 5V 2ADC
Power consumption 6 Watts [max]
Operation temperature 0~40°C [32~104°F]
Storage temperature -20~60°C [-4~140°F]
Relative humidity 20~90% RH [no condensation]
Package Contents
1x HTV
1x VGA-component breakout cable
1x 5V power adapter
1x User Manual
~ 4 ~
ResolutionSupport
PC Graphics [DVI or VGA]
VESA640x400 @85Hz VESA1024x768 @60Hz VESA1280x960 @85Hz 1152x864@60Hz
VESA720x400 @85Hz VESA1024x768 @75Hz VESA1280x1024 @60Hz Mac 480-66A
VESA640x480 @72Hz VESA1024x768 @85Hz VESA1280x1024 @85Hz Mac 480-66B
VESA640x480 @75Hz VESA1152x864 @60Hz VESA1360x768 @60Hz Mac 600-66
VESA640x480 @85Hz VESA1152x864 @75Hz VESA1440x900 @60Hz Mac 768-60
VESA800x600 @60Hz VESA1280x768 @60Hz VESA1400x1050 @60Hz Mac 870-75
VESA800x600 @72Hz VESA1280x768 @75Hz VESA1400x1050 @75Hz IBM 6000
VESA800x600 @75Hz VESA1280x768 @85Hz VESA1920x1200 @60Hz NEC 1024-70
VESA800x600 @85Hz VESA1280x960 @60Hz VESA1600x1200 @60Hz SUN 1024-76
Video [HDMI or component (YPbPr)]
EIA720x480p @59.94(60)Hz
EIA720x576p @50Hz
EIA1280x720p @59.94(60)Hz
EIA1920x1080i @59.94(60)Hz
EIA1920x1080p @59.94(60)Hz
712x484 (NTSC)
702x574 (PAL)
~ 5 ~
FrontPanel
1. DIP Switch for EDID 3. HDMI input 5. Power on/off indicator
2. HDMI or DVI source switch button 4. DVI input 6. +5V DC interlocked power jack
EDIDDIPSwitch
1 Mode
On ªLearn EDID from VGAsocket and save EDID to HDMI socket
Off ©Write back the default EDID to HDMI socket
2
On ªLearn EDID from VGAsocket and save EDID to DVI socket
Off ©Write back the default EDID to DVI socket
RearPanel
7. S/PDIF audio output 9. VGAoutput or component output via connecting a breakout cable
8. Stereo audio output 10. VGAor component output switch button
Panel Descriptions
7 8 9 10
6
5
2
1 3 4
~ 6 ~
1. Connect HDMI or DVI source to the video input.
2. Connect S/PDIF or stereo audio source to RCAjack or 3.5mm jack.
3. For connecting to VGAdisplay/projector, link VGAcable to the VGAoutput connector. For connecting to component
(YPbPr) video display/projector, link VGA-component breakout cable first tothe VGAoutput connector then link a
component cable to the component (YPbPr) display/projector.
4. Power up theASP-HTV.
1. Power up theASP-HTV. Connect display to VGA/YPbPr Output.
2. To learn EDID for HDMI source, please power upASP-HTV first. Secondly pull down the DIP switch 1 to ON, and the
red light will be dark and bright to indicate the EDID learning process is complete. Finally, please remember to reboot
ASP-HTV for updating. You DON’TNEED to pull up the DIP switch again unless you want to learn another EDID by
pulling DIP switch 1 up and down.
3. To learn EDID for DVI source, please power upASP-HTV first. Secondly pull down the DIP switch 2 to ON, and the
red light will be dark and bright to indicate the EDID learning process is complete. Finally, please remember to reboot
ASP-HTV for updating. You DON’TNEED to pull up the DIP switch again unless you want to learn another EDID by
pulling DIP switch 2 up and down.
1. Only HDMI enabled TV sets with underscan/overscan*support, the full active video can be accurately displayed.
Some HDMI equipped TV sets may not support this feature. If underscan/overscan*is NOT supported, the top, bottom,
left and right border of the active video may be screened, and the S/PDIF audio may not sound right.
2. Analog stereo audio can merely support 2-channel audio. This version does NOTsupport 8-channel analog audio
applications.
3. S/PDIF audio input supports the main 2-channel audio input
4. S/PDIF supports only 48kHz audio sample rate. Other than this rate, the input digital audio should be adjusted to
48kHz in order to get audio signal correctly sent.
*Theunderscanmodedisplaysthefullvideoframe,whichrevealscontentontheedgethatisrecorded.Inoverscan,
thefieldmonitorzoomsintotheareathatwouldbevisibleonmosttelevisions.Setthefieldmonitortounderscan
ifyourvideowillbeviewedonacomputermonitororshownwithaprojectorandalsotolookforlightstands,
microphones,andotherunwantedobjectsontheedgesofyourshot.Setittooverscantoseehowthevideowill
lookonatelevision.
Hardware Installation
Notice
EDID Learning
~ 7 ~
Aurora Multimedia Corp. (“Manufacturer”) warrants that this product is free of defects in both materials and
workmanship for a period of 3 years as defined herein for parts and labor from date of purchase. Motorized
mechanical parts (Hard Drives, DVD, etc), mechanical parts (buttons, doors, etc), remotes and cables are
covered for a period of 1 year. Batteries are not covered by this warranty. During the warranty period, and
upon proof of purchase, the product will be repaired or replaced (with same or similar model) at our option
without charge for parts or labor for the specified product warranty period.
This warranty shall not apply if any of the following:
A) The product has been damaged by negligence, accident, lightning, water, act-of-God or mishandling; or,
B) The product has not been operated in accordance with procedures specified in operating instructions: or,
C) The product has been repaired and or altered by other than manufacturer or authorized service center; or,
D) The product's original serial number has been modified or removed: or,
E) External equipment other than supplied by manufacturer, in determination of manufacturer, shall have
affected the performance, safety or reliability of the product.
F) Part(s) are no longer available for product.
In the event that the product needs repair or replacement during the specified warranty period, product
should be shipped back to Manufacturer at Purchaser's expense. Repaired or replaced product shall be
returned to Purchaser by standard shipping methods at Manufacturer's discretion. Express shipping will be
at the expense of the Purchaser. If Purchaser resides outside the contiguous US, return shipping shall be at
Purchaser's expense.
No other warranty, express or implied other than Manufacturer's shall apply.
Manufacturer does not assume any responsibility for consequential damages, expenses or loss of revenue or
property, inconvenience or interruption in operation experienced by the customer due to a malfunction of
the purchased equipment. No warranty service performed on any product shall extend the applicable
warranty period.
This warranty does not cover damage to the equipment during shipping and Manufacturer assumes no
responsibility for such damage.
This product warranty extends to the original purchaser only and will be null and void upon any assignment
or transfer.
Aurora Multimedia Corp.
205 Commercial Court, Morganville, NJ 07751
Phone: (732) 591-5800 Fax: (732) 591-5801
www.auroramultimedia.com
Limited 3 Year Warranty
This manual suits for next models
1
Table of contents
Other Aurora Multimedia Media Converter manuals
