Aurora EGO AE120 User manual

Single Pack User Manual
Single Pack User Manual

Package Content
EGO fan x 1
Screws x 4
6-6 pin short connecting wire x 1
6-6 pin short connecting wire x 1

03
01
Please make sure the power is off.
02
Install the fans in your PC case,
and screw it in the designated areas.
Installation Guide
Please use the provided screws for fans and radia-
tors to assemble on the computer. The 6-6 pin long
and short connecting wires are provided to further
plan your build as a complementary item to other
EGO/Aurora involved builds.
* The single pack can only be synced with an addressable RGB
motherboard. Please make sure your motherboard supports
addressable RGB lighting.
EGO fans can be connected to each other through the 6-6pin
connecting wires, hence the installation above is a suggestion.
OUT OUTININ OUTIN
60mm
600mm

Troubleshooting
Important Notes
If your fan does not operate properly,
please follow the instructions below:
1.Please check your system’s power.
2.Please make sure all the connectors are
connected properly.
1.Please install the fan by following our instructions.
2.When storing the fan, please keep this product away
from high temperatures. Keep it away from machines
such as heaters that might cause high temperatures.
3.Please do not put anything in the impeller.
4.Please do not modify the wires or the connectors
provided by InWin.
5.Please do not touch the fan blades when the
fan is in operation.
6.Please only use your fan in a computer case.
7.Please keep this product away from any liquids.

■ Our products comply with RoHS regulation.
■ Specifications may vary based on different regions.
■ Extra fee for optional parts.
InWin EGO Fans
Specifications
Product Name
Fan Size
Material
Rated Voltage
Rated Power
Rated Current
ADD RGB Rated Voltage
ADD RGB Rated Power
ADD RGB Rated Current
Speed Mode
Air Flow
Air Pressure
LED
Connector
Noise Level
Bearing Type
EGO AE120
120 x 120 x 25mm
Silicone, PC
DC 12V
0.76W
0.06A
5V
4W
0.8A
(PWM) 800~1400 RPM
Turbo Mode: 2000 RPM Max.
40.7 CFM
Turbo Mode: 58.05 CFM
1.51mm/ H2O
Turbo Mode: 2.74mm/H2O
Addressable RGB
6-Pin Modular
< 22 dB(A)
Turbo Mode: 32 dB(A) Max.
Sleeve Bearing

Copyright © 2019 InWin Development Inc. All Rights Reserved.