AUSTRACK CAMPERS TANAMI X15A User manual

Head Office –07 5498 388 Brisbane North –07 5408 7111 Brisbane South –07 3112 7868
Newcastle NSW –02 4006 6833 Campbellfield VIC –03 9357 5081 Kewdale WA –08 6252 7007
Precision Motors Armidale NSW –02 6772 5866 Rising Sun Townsville –07 4779 0211

Head Office –07 5498 388 Brisbane North –07 5408 7111 Brisbane South –07 3112 7868
Newcastle NSW –02 4006 6833 Campbellfield VIC –03 9357 5081 Kewdale WA –08 6252 7007
Precision Motors Armidale NSW –02 6772 5866 Rising Sun Townsville –07 4779 0211
Table of Contents
Table of Contents............................................2
Store Locator...................................................3
Head Office .................................................3
Caboolture Showroom................................3
Rocklea Showroom .....................................3
Newcastle Showroom.................................3
Melbourne Showroom................................3
Perth Showroom.........................................3
Re-sellers and suppliers ..................................4
Rising Sun Townsville –Re-seller................4
Precision Motors Armidale –Re-seller .......4
Redarc .........................................................4
Projecta.......................................................4
Truma hot water systems ...........................4
Country Comfort hot water systems ..........4
Dometic Air Conditioners............................4
Cruisemaster...............................................4
Ark...............................................................4
Warranty T&C’s...............................................5
General Safety Introduction............................7
Load Distribution.............................................8
Maintenance Schedule ...................................9
Specifications ................................................10
Electrical System ...........................................12
Battery Management System ...................12
Batteries....................................................12
Solar ..........................................................12
Inverter .....................................................13
Mains Power .............................................13
Extra Solar Input........................................14
Control Panel.............................................14
Fuse box....................................................15
Water System................................................16
Water Pump..............................................16
Truma Ultra-Rapid Hot Water System..........17
How to light hot water system on gas......17
How to light hot water system on 240 V..17
General Usage Instructions.......................17
Hot Water System Maintenance ..............17
Braking Systems............................................18
Electric Brakes...........................................18
Trailer Plug Wiring ....................................18
Anderson plug...........................................18
Trailer Breakaway .....................................19
Handbrake ................................................19
Setting up campsite ......................................20
Stabiliser Legs ...........................................20
Jockey wheel.............................................20
Gas System....................................................21
Outside Shade...............................................22
Electric awning..........................................22
Canvas Annex............................................22
Wet weather camping ..............................22
Toilet.............................................................23
Filling the flush tank..................................23
Preparing the waste tank..........................23
Use of the toilet ........................................24
Emptying the flush tank............................24
Preparing the toilet for storage ................25
External Kitchen............................................26
Air Conditioner..............................................28
TV antenna / TV / DVD..................................29
Watching Free-to-Air TV...........................29
Watching DVD...........................................29
Condensation / mould..................................30
Troubleshooting............................................31

Head Office –07 5498 388 Brisbane North –07 5408 7111 Brisbane South –07 3112 7868
Newcastle NSW –02 4006 6833 Campbellfield VIC –03 9357 5081 Kewdale WA –08 6252 7007
Precision Motors Armidale NSW –02 6772 5866 Rising Sun Townsville –07 4779 0211
Store Locator
Head Office
07 5498 3888
[e-mail]
Mon –Fri 9am-5pm
Scan for Map
Caboolture Showroom
73 Lear Jet Drive Caboolture, QLD 4510
07 5408 7111
[e-mail]
Mon –Fri 9am-5pm
Sat 9am-3pm
Rocklea Showroom
7 Collinsvale Street Rocklea, QLD 4106
07 3112 7868
[e-mail]
Mon –Fri 9am-5pm
Sat 9am-1pm
Newcastle Showroom
4/2364 Pacific Highway Heatherbrae, NSW 2324
02 4006 6833
[e-mail]
Mon –Fri 9am-5pm
Sat 9am-4pm
Melbourne Showroom
1644 Hume Highway Campbellfield, VIC 3061
03 9357 5081
[e-mail]
Mon –Fri 9am-5pm
Sat 9am-3pm
Perth Showroom
634 Casella Place Kewdale, WA 6105
08 6252 7007
[e-mail]
Mon –Fri 9am-5pm
Sat 9am-3pm

Head Office –07 5498 388 Brisbane North –07 5408 7111 Brisbane South –07 3112 7868
Newcastle NSW –02 4006 6833 Campbellfield VIC –03 9357 5081 Kewdale WA –08 6252 7007
Precision Motors Armidale NSW –02 6772 5866 Rising Sun Townsville –07 4779 0211
Re-sellers and suppliers
Rising Sun Townsville –Re-seller
35 Bowen Road Rosslea, QLD 4812
07 4779 0211
Precision Motors Armidale –Re-seller
101/107 Barney Street Armidale, NSW
02 36772 5866
Redarc
www.redarc.com.au
Technical support 1300 733 272
Projecta
www.projecta.com.au
Technical support 1800 422 422
Truma hot water systems
https://www.leisure-tec.com.au/services/
Technical support 1300 072 018
Country Comfort hot water systems
https://countrycomfortwaterheater.com.au/
Technical support 0438 242 813 or 0412 111 656
Dometic Air Conditioners
https://www.dometic.com/en-au/support/service-locator
Technical support 1800 21 21 21
Cruisemaster
https://cruisemaster.com.au/
Customer Service & Support 1300 35 45 65
Ark
https://www.arkcorp.com.au/
Customer Service & Support 02 9678 9036

Head Office –07 5498 388 Brisbane North –07 5408 7111 Brisbane South –07 3112 7868
Newcastle NSW –02 4006 6833 Campbellfield VIC –03 9357 5081 Kewdale WA –08 6252 7007
Precision Motors Armidale NSW –02 6772 5866 Rising Sun Townsville –07 4779 0211
Warranty T&C’s
The following relates to warranties offered by Austrack Campers. Please read this information
carefully, and should you have any questions, please contact Austrack Campers Head Office on (07)
5498 3888 Option 2 or email [e-mail].
By purchasing an item from Austrack Campers, you hereby agree to all terms and conditions of
warranty as set forth by Austrack Campers.
1. CLAIMS VALIDITY
1.0 Warranties are only valid to the original purchaser of the item.
1.1 Warranties are valid from the original date of purchase only.
1.2 Warranties apply only to items sold as “new”.
1.3 Warranties do not extend to items deemed to be “factory seconds”, “ex-demo” or “damaged”.
Unless specifically stated otherwise by Austrack Campers in writing, warranties will only apply to items
as expressed in clause 1.0, 1.1 and 1.2.
1.4 Warranties do not apply to items sold via auction
1.5 Warranties are not transferable under any circumstances.
1.6 Should an item be sold by the original purchaser to a third party, all warranties immediately
become null and void. The original purchaser shall make no claims or be eligible for any claims on
behalf of the new owner.
1.7 Warranties do not extend to any products purchased from Austrack Campers that are used in hire
schemes or as rentals.
1.8 Austrack Campers will not cover damage caused as a result of unauthorised modifications, misuse,
abuse, incorrect assembly, improper and irregular maintenance, or accident or collision.
1.9 Any warranty repairs performed via an authorised warranty claim approved by Austrack Campers
must be performed by Austrack Campers, or by an authorised representative of Austrack Campers. In
certain circumstances Austrack Campers may authorise repairs by other repairers on a case-by-case
basis. Authorisation for these repairs will only be with the express written permission of Austrack
Campers.
1.10 Any affiliates, representatives, associates, agents, suppliers, resellers or similar of Austrack
Campers do not have the authority to authorise or deny warranty claims on behalf of Austrack
Campers. Austrack Campers Head Office are the only ones who are able to authorise warranty claims.
1.11 Austrack Campers are not liable, (in part or whole) for any warranties, either express or implied,
made by agents or resellers on behalf of Austrack Campers without the knowledge or express written
permission of Austrack Campers. Any such unauthorised claims shall be the responsibility of the agent
or reseller only.

Head Office –07 5498 388 Brisbane North –07 5408 7111 Brisbane South –07 3112 7868
Newcastle NSW –02 4006 6833 Campbellfield VIC –03 9357 5081 Kewdale WA –08 6252 7007
Precision Motors Armidale NSW –02 6772 5866 Rising Sun Townsville –07 4779 0211
2. HYBRIDS & CAMPER TRAILERS
2.0 Unless stated otherwise, hybrid campers & camper trailers are covered by a 12-month limited
manufacturer’s warranty from the original date of purchase. Furthermore, also from the original date
of purchase, Austrack Campers’ hybrid campers & camper trailers are covered by a 5-year structural
warranty that covers the draw bar and chassis only from fatigue.
2.1 All of our goods come with guarantees that cannot be excluded under the Australian Consumer
Law.
2.2 You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure.
2.3 Items no covered under warranty include:
•Rust
•Wheels and Tyres
•Paint
•Travel Covers and Straps
•General consumables (e.g. bearings, light bulbs etc)
•Zips and mesh or screens are not covered.
2.4 In addition to Austrack Campers’ warranty, the customers may also be covered by other rights and
remedies of Consumer Law in relation to the goods and/or services to which this warranty relates.
3. FACTORY SECONDS, EX-DEMONSTRATION AND DAMAGED GOODS
3.0 Occasionally, Austrack Campers may offer items for sale deemed to be “factory seconds”, “ex-
demonstration”, or “damaged”. Such items are sold on an “as is” basis.
3.1 No warranties, refunds, credits, exchanges or similar associated apply to “factory seconds”, “ex-
demonstration”, or “damaged” items. Upon selling these items, Austrack Campers will attempt to
provide all relevant information with regards to the item, including faults, defects, or similar. Note,
there may be instances where minor defects or imperfections have been overlooked. Understand this
is unintentional and in no way alters the nature of the sale.
3.2 “Ex-demonstration”, “factory seconds” or “damaged”, due to their nature, it is reasonable to
expect that some imperfections or flaws may exist including where not initially apparent. By
purchasing a “factory seconds”, “ex-demonstration”, or “damaged”, you agree to this statement in
full and accept that there are no warranties implied or expressed.
4. HOW TO LODGE A CLAIM
4.0 All warranty claims MUST BE LODGED via our website using our online Warranty Claim Form.
5. MAKE CONTACT
5.0 For questions relating to warranties, please contact us on [phone] Option 2
or [e-mail].

Head Office –07 5498 388 Brisbane North –07 5408 7111 Brisbane South –07 3112 7868
Newcastle NSW –02 4006 6833 Campbellfield VIC –03 9357 5081 Kewdale WA –08 6252 7007
Precision Motors Armidale NSW –02 6772 5866 Rising Sun Townsville –07 4779 0211
General Safety Introduction
WARNING–Before using this product you should read this manual and
those manuals supplied by component manufacturers applicable to this
product.
This manual is supplied as a reference to required maintenance of your new Austrack Campers Hybrid
offroad camper.
Failure to use and maintain the product in accordance with what is outlined in this manual may affect
your warranty.
Incorrect and/or insufficient maintenance may cause product failure resulting in property loss,
damage or injury or death.
Maintenance intervals are critical for normal use; extreme use may require shorter or additional
maintenance intervals. See Maintenance Schedule for more details.
This manual content does not imply, express or other any warranty, the owner should read the
Warranty T&C’s included in this manual.
Before using this product, you need to be certain that your tow vehicle is suitably rated and equipped
to tow the product safely and legally.
The trailer and vehicle pairing must we within the safe “Maximum Towing Capacity”, “Ball Weight
Capacity” and “Gross Combination Mass” as stated by the vehicle manufacturer.
This Hybrid camper is fitted with electric brakes and a “Breakaway System”. Requirements for
breakaway systems can vary from state to state. The breakaway battery draws its charge from the
house battery system of the Gibb. See Braking Systems section for more details.
Austrack Campers reserves the right to modify an advertised component (e.g., air conditioning unit,
stove, inverter) with an item of similar value and quality, due to supply and availability. In order to
fulfill orders, all Austrack Campers are subject to change at Austrack's discretion.

Head Office –07 5498 388 Brisbane North –07 5408 7111 Brisbane South –07 3112 7868
Newcastle NSW –02 4006 6833 Campbellfield VIC –03 9357 5081 Kewdale WA –08 6252 7007
Precision Motors Armidale NSW –02 6772 5866 Rising Sun Townsville –07 4779 0211
Load Distribution
When heading away on your next big adventure it is important to load your caravan correctly to
distribute weight evenly and achieve a suitable ball weight load and prevent loading in a manner that
can cause a caravan to sway and/or roll excessively left and right. The optimum ball weight on a
caravan is between 8% and 12% of the total caravan weight.
WARNING: BALL LOADING (DOWNWARD LOAD ON TOW HITCH) MUST NOT EXCEED 350KG
OR THE MAXIMUM ALLOWABLE LOAD BY THE VEHICLE MANUFACTURER OR TOW BAR RATING,
WHICH EVER IS THE LOWEST.
Exceeding these limits may result in an accident, causing property damage and/or serious injury or
death.
• Always load both sides of the caravan evenly
• Load heavy items low and directly over the axle.
• Secure all items to prevent damage to the caravan during travel.
• Consider water tank levels and how they may affect the balance front and back and the percentage
of ball weight.
• Overhead cupboards should only be used for lightweight items such as clothes, personal items,
bedding etc.
• Never store heavy items in overhead cupboards.
• Heavy cooking equipment should be stored in lower cupboards.
• Tinned and bottled food for cooking etc. should be stored in the pantry drawer.
• Never load in a manner that causes the ball weight to exceed the limit of the tow vehicle.

Head Office –07 5498 388 Brisbane North –07 5408 7111 Brisbane South –07 3112 7868
Newcastle NSW –02 4006 6833 Campbellfield VIC –03 9357 5081 Kewdale WA –08 6252 7007
Precision Motors Armidale NSW –02 6772 5866 Rising Sun Townsville –07 4779 0211
Maintenance Schedule

Head Office –07 5498 388 Brisbane North –07 5408 7111 Brisbane South –07 3112 7868
Newcastle NSW –02 4006 6833 Campbellfield VIC –03 9357 5081 Kewdale WA –08 6252 7007
Precision Motors Armidale NSW –02 6772 5866 Rising Sun Townsville –07 4779 0211
Specifications
Structure & Finish
Fully welded Aluminium frame construction with Royal silver aluminium
composite panel & gloss black aluminium checker plate.
Construction
Fully Welded aluminium wall frame, aluminium composite panelling, Hot
dipped galvanised Chassis & Drawbar.
Drawbar & Chassis
Hot dipped galvanised Inside & Outside 150 x 50 x 4mm. Full RHS box chassis
100 x 50 x 3mm. Q345Steel Tube.
Roof Construction
Reinforced aluminium composite with aluminium frame.
Hitch
3500 Kg rated off road hitch. ADR approved rated safety chains. Dual rear
recovery points. Ark XO 750 Series extra heavy duty swing away dual wheel
jockey wheel.
Brakes
6 stud 4×4 hubs, heavy duty bearings and 12-inch heavy duty electric brakes
with mechanical handbrake. Trailer breakaway system.
Suspension
Adjustable independent coil spring suspension with twin reinforced shock
absorbers.
Stone Guard
Fully Enclosed front storage box with twin gas bottle holders and twin Jerry
can storage.
Gas & Fuel
2 x 9kg or 4.5kg Gas holder. 2 x 20L Jerry Can Holders.
Wheels & Tyres
4 x Brand New Reinforced Black alloy mag wheels. 4 x Brand New M/T (Mud
Terrain), Tyre Size: 265/75R16. 4 x Heavy Duty Lockable and Adjustable Drop-
Down stabiliser legs. Double spare tyre holder. 4 x Embossed Mudflaps.
Bearings
Inner - Cup 25580
Cone 25520
Outer - Cup 15123
Cone 15245
Seal 33940
Electrical Connection
1 x 7 pin flat or round plug. 1 x 50Amp Anderson plug. External 240V inlet,
240v outlet.
Electrical System
2 x 100AH Lithium batteries. 4 x 100W roof mounted solar panels. REDARC
2kW Pure Sinewave inverter with 240v auto changeover. REDARC Manager30
with built in 30amp AC charger, 30amp DC/DC charger with power supply
mode. Includes full battery management system. Digital display amp and
voltmeter. Internal and external 240V outlets. Multiple USB and accessory
outlets.
Lighting
External LED body lights, Multiple internal LED lights & 2 LED reading lights.
LED Stair light handle. LED strip lighting.

Head Office –07 5498 388 Brisbane North –07 5408 7111 Brisbane South –07 3112 7868
Newcastle NSW –02 4006 6833 Campbellfield VIC –03 9357 5081 Kewdale WA –08 6252 7007
Precision Motors Armidale NSW –02 6772 5866 Rising Sun Townsville –07 4779 0211
Gas Lines
Completely plumbed from gas bottles to kitchen with dual bottle change over
valve & gas certification certificate. Additional bayonet gas connection at rear
of camper for a BBQ gas supply.
Water Storage
2 x 120L Food grade poly water tanks & 1 X 80L plumbed grey water tank &
system. 12.5L per min 12V Electric Pump. Water tank guards, water gauge.
Storage
Multiple Storage Boxes with Drawers & plenty of open space. High Quality
pinch-weld automotive seals & adjustable compression locks.
Windows
Double glazed quality tinted glass door with mosquito & security mesh.
Windows include anti-mosquito mesh and shade curtain.
Internal setup
Gas strut assisted pop up roof for easy quick set up. Internal zip windows with
screens in pop top.
Internal Features
Timber look Vinyl flooring. Plush faux leather seating. Under seat storage.
Dining table. Upright wardrobe and draw storage. Multiple internal side
pockets for extra storage.
Dining
Adjustable and removable swing away dining table, faux leather sofa.
Mattress
Plush 150mm Custom King foldable innerspring mattress.
Shower
Truma Water ultra-rapid Gas/electric water heater. Full internal bathroom
with electric flushing toilet (external removable cassette), vanity sink with
mirror & fully adjustable shower rose & shower curtain. External hot/cold RV
Side Mounted Shower Tent.
Kitchen
Slide Out Stainless steel kitchen with cutlery drawer, utility drawers, electric
pump, hot/cold tap, large sink & AGA approved multi burner stove with wind
break. Drainage rack, rear prep bench & Large slide out kitchen preparation
bench. Multiple storage compartments.
Bonus inclusions
Roof Mounted Air conditioner
Electric PVC waterproof awning: 3.8M x 2.5M
Multiple gas outlets to allow for kitchen plumbing & also a spare for a BBQ
LED TV With interior & exterior mounts and connections
Fully enclosed canvas annex incl. roof, walls, floor, draft skirt. 450gsm
Stereo CD/DVD/MP3/USB/RADIO. Internal + External Speakers
Closed
Measurements
6700L x 2180W x 2650H (including aircon)
Tare weight
Approx. 2340kg (Bonus Inclusions do not make up part of tare weight
Registered
3000kg
Ball Weight
Approx. 140kg

Head Office –07 5498 388 Brisbane North –07 5408 7111 Brisbane South –07 3112 7868
Newcastle NSW –02 4006 6833 Campbellfield VIC –03 9357 5081 Kewdale WA –08 6252 7007
Precision Motors Armidale NSW –02 6772 5866 Rising Sun Townsville –07 4779 0211
Electrical System
Battery Management System
The Tanami is equipped with the Redarc Manager30 Battery Management System (BMS). The
Manager30 operates like 6 separate products, it charges an auxiliary battery from the vehicle while
on the move, it’s a 240 V charger, a MPPT solar regulator, a battery isolator, a load disconnect
controller, all with a remote battery monitor. This is wired into the Tanami so that you do not need to
change the charging source, the BMS will always prioritise the solar charging, and top up from the
other inputs if available and required.
Batteries
The Tanami is fitted with 2 x 100 Ah Lithium Iron Phosphate Batteries. These batteries have an
integrated BMS to prevent accidental damage to the batteries. Included is an activation cable, should
the battery become discharged at or below 10 V, connect the hybrid to a power source and press the
button on the activation cable to awaken the batteries. It is only required to activate one battery, and
this will awaken both.
When the hybrid is placed into storage, it is important to ensure that there is a power source
connected, either from mains 240 V or solar. The Redarc Manager30 BMS can be put into storage
mode to ensure that the batteries are maintained. It is still important to check the battery condition
on a regular basis, especially if relying on solar to maintain the charge. If the hybrid is under shelter or
has a fitted cover, an external power source will be required to maintain the power to the batteries.
Even with the control panel turned off, there will be power draw on the batteries.
Solar
There is 400W of solar standard on the Tanami. This is mounted on the roof of the hybrid and is
connected to the MPPT solar regulator connection of the Redarc Manager30 BMS. This will
automatically begin charging when the panel is exposed to solar radiation. Whilst 400 W of solar is
generally more than sufficient to supply enough power to the batteries for normal usage, there will
be times that an external panel will need to be connected to maintain the battery voltage. Shade from
trees or cloud cover can greatly affect the performance of the solar panels. Excessive use of the
inverter or running extra fridge/freezers will also draw more current than the solar can replace each
day.

Head Office –07 5498 388 Brisbane North –07 5408 7111 Brisbane South –07 3112 7868
Newcastle NSW –02 4006 6833 Campbellfield VIC –03 9357 5081 Kewdale WA –08 6252 7007
Precision Motors Armidale NSW –02 6772 5866 Rising Sun Townsville –07 4779 0211
Inverter
The Tanami is also equipped with a Redarc 2000 W pure sine wave inverter and automatic change-
over relay. This means that no matter where you are, you are able to run your 240 V appliances off
the hybrid! If you are free camping, you will need to turn on the inverter, and you are limited to 2000
W appliances. To turn on the inverter, you will need to push the on/off button in the control panel
near the door. If there is a red light illuminated, then the inverter is on.
If you are plugged into 240 V mains power, then the system will automatically switch over and allow
you to run your appliances using the mains power without needing to turn the inverter on.
When using the inverter, especially with high wattage appliances there will be a temporary drop in
the voltage of your batteries, this is due to the high current being drawn by the system. This will
increase back to normal once the appliance has been switched off.
When not in use, the inverter should be switched off using the button on the control panel. The
inverter will draw current off the batteries, even if not supplying power to a 240 V appliance, and this
can cause your batteries to become flat if there is not sufficient charge being supplied to the hybrid.
Mains Power
The Tanami comes standard with a 15 A input on the side of the hybrid to allow mains power to be
connected directly to the electrical system. This 15 A input has a larger earth connection than a
standard home plug and requires the use of a specialised 15 A extension lead which will have the
larger earth pin on both ends. If connecting the van to mains power point where a 15 A power point
is not available, you must use a 10 A -15 A adaptor with safety switch. These are available from most
camping or hardware stores.
The RCD safety switch for the 240 V circuits is located on the outside end of the main bed.
240 V mains power is lethal, failing to use an adaptor can result in serious injury or death.

Head Office –07 5498 388 Brisbane North –07 5408 7111 Brisbane South –07 3112 7868
Newcastle NSW –02 4006 6833 Campbellfield VIC –03 9357 5081 Kewdale WA –08 6252 7007
Precision Motors Armidale NSW –02 6772 5866 Rising Sun Townsville –07 4779 0211
Extra Solar Input
Also included on the Tanami is a solar input on the rear driver’s side of the hybrid. This is for connection
to an external solar panel to supplement the 400 W of solar on the roof. This input requires a regulated
panel to be connected, use of an un-regulated panel may cause damage to the batteries in the hybrid.
Control Panel
The main control panel of the Tanami is pictured below.
1. Front water tank gauge
2. Rear water tank gauge
3. Grey water tank gauge
4. Push button power switches
5. 3-way Electric awning switch (Open/Off/Close)
6. Stereo
7. 2-way Step switch (Open/Close)
8. Truma hot water system gas switch
9. Switch for hot water system on 240 v
10. Inverter power switch
11. Redarc Manager30 display screen

Head Office –07 5498 388 Brisbane North –07 5408 7111 Brisbane South –07 3112 7868
Newcastle NSW –02 4006 6833 Campbellfield VIC –03 9357 5081 Kewdale WA –08 6252 7007
Precision Motors Armidale NSW –02 6772 5866 Rising Sun Townsville –07 4779 0211
Fuse box
The fuse box is located under the seat inside the Tanami. Each of the fuses are listed on the inside of
the fuse box lid and will have a red light next to them if they need replacing. It is highly recommended
to keep a mix pack of spare fuses in the hybrid in case of tripping.

Head Office –07 5498 388 Brisbane North –07 5408 7111 Brisbane South –07 3112 7868
Newcastle NSW –02 4006 6833 Campbellfield VIC –03 9357 5081 Kewdale WA –08 6252 7007
Precision Motors Armidale NSW –02 6772 5866 Rising Sun Townsville –07 4779 0211
Water System
The Tanami is equipped with 2 x 120 L fresh water poly tanks with stainless steel guard and
1 x 80 L grey water poly tank with stainless steel guard. All 3 tanks have taps and bungs on the bottom
of the tank for easy draining and rinsing.
The fresh water tanks are not interconnected, and these can be changed using the handle under the
seat inside the hybrid. It is recommended to drain one tank before switching to the other tank, and
not to draw from both tanks at the same time.
The blue handle has been designed to point in the direction of the tank that is being drawn from, so if
the handle is pointing forwards, you are drawing from the front tank & vice versa.
Each of the water tanks require filling independently, the rear water tank filler is inside the cover with
the mains water connection and the front filler is in front of the wheel arch. The filler is equipped with
a breather hole which will allow the air to escape the tank while the water is going in. If this hole is
blocked, water will not be able to enter the tank. The tank is full when water comes out the breather
hole.
The grey water tank is connected to the internal ensuite basin and ensuite shower drain. It can be
emptied by connecting a hose to the outlet of the tank and opening the red valve. Always empty the
grey water into an appropriate waste collection point, or as directed by Caravan Park
management/National Parks officers.
Water Pump
The water pump will need to be switched on using the push button switch on the control panel. It may
make noise when initially turned on with all taps closed to pressurise the system and top up the hot
water system, but this should shut off quickly. If the pump continues to run with all taps closed, this
could indicate a leak and requires investigation and rectification.
The water pump with automatically turn on when a tap is opened and will shut off shortly after the
tap is closed. It may turn on and off quickly a few times to fully pressurise the system and this is totally
normal.
If the water pump is cycling on and off and the system has been thoroughly inspected for leaks with
nothing found, please contact the service department for more instructions.

Head Office –07 5498 388 Brisbane North –07 5408 7111 Brisbane South –07 3112 7868
Newcastle NSW –02 4006 6833 Campbellfield VIC –03 9357 5081 Kewdale WA –08 6252 7007
Precision Motors Armidale NSW –02 6772 5866 Rising Sun Townsville –07 4779 0211
Truma Ultra-Rapid Hot Water System
The Tanami has a Truma ultra-rapid gas/electric hot water system installed. This system is designed
to run off either the plumbed gas in the hybrid or from 240 V mains power. For detailed instructions,
please see the instruction manual supplied in the hybrid.
How to light hot water system on gas
•Ensure gas bottle is turned on and that valve is pointing to the correct gas bottle
•Turn on water pump or connect town water
•Remove the cover off the external vent
•Ignite gas burner on outside kitchen
•Open the hot water tap on the external kitchen until water is running through smoothly
•Ignite hot water system using switch inside the control panel to either 60° or 70°
•Turn off outside burner
How to light hot water system on 240 V
•Ensure hybrid is plugged into 240 V mains. Hot water system will not run off the inverter.
•Turn on water pump or connect town water
•Open the hot water tap on the external kitchen until water is running through smoothly
•Turn on the white switch in the control panel
•Will automatically heat up to 70°
General Usage Instructions
Always leave the yellow drain valve in the closed position in line with the water hose. When storing
the hybrid, empty the hot water system by putting this valve into the upright position while the water
pump is turned off and open hot taps in the van to clear the water in the lines. To refill the hot water
system, ensure the water pump is on or connected to mains water, open a hot tap and allow tap to
stay open until water runs through smoothly. Always ensure that the hot water system is filled before
igniting to avoid damage to the system.
Water must be drained from the system if there is a risk of frost. Frozen water will damage the system,
and this is not covered by warranty.
Do not operate the water heater when the vehicle is in motion.
Hot Water System Maintenance
The Truma hot water system must be descaled on a regular basis, at least twice a year. Regular
commercial cleaning products are suitable for the cleaning, disinfection, and care of the hot water
system.
To prevent micro-organism colonisations, it is recommended to heat the system to 70° at regular
intervals.
Operate the P&T safety valve and drain valve need to be operated regularly to remove lime deposits.

Head Office –07 5498 388 Brisbane North –07 5408 7111 Brisbane South –07 3112 7868
Newcastle NSW –02 4006 6833 Campbellfield VIC –03 9357 5081 Kewdale WA –08 6252 7007
Precision Motors Armidale NSW –02 6772 5866 Rising Sun Townsville –07 4779 0211
Braking Systems
Electric Brakes
The Tanami comes fitted with electric brakes which require a brake controller installed into the towing
vehicle that can be controlled from the driver’s seat. There are many systems available which can
either be permanently installed into the tow vehicle or Bluetooth units that are mounted to the trailer
and have a remote to control from the driver’s position. You must have a brake controller installed in
the vehicle or a Bluetooth unit on the day of handover otherwise the hybrid will not be released to
you.
Electric trailer brakes are designed to assist your vehicle brakes to stop in a safe and effective manner.
It is important that both your vehicle and the trailer are serviced regularly. The trailer brakes will have
a run-in period that will vary trailer to trailer, but it is important to have the trailer brakes inspected
and adjusted by a qualified professional in line with the maintenance schedule.
Trailer Plug Wiring
The Tanami comes fitted standard with a 7-pin flat trailer plug.
If a different plug configuration has been requested, please reach out to your local showroom or the
service department to obtain a copy of the wiring diagram.
Anderson plug
The Tanami has an Anderson plug connection at the drawbar. This is wired to the DC-DC connection
of the Redarc Manager30 and has a circuit breaker installed under the bed. The ignition trigger wire
has not been connected; this can be connected by an auto electrician to suit your vehicle. This
connection is exclusively for a vehicle alternator/battery voltage, it will not work with a solar panel
whether regulated or not. The Redarc Manager30 has a voltage cut out for the DC-DC charger,
meaning that it will preserve the started vehicle battery when the alternator is not providing charge.

Head Office –07 5498 388 Brisbane North –07 5408 7111 Brisbane South –07 3112 7868
Newcastle NSW –02 4006 6833 Campbellfield VIC –03 9357 5081 Kewdale WA –08 6252 7007
Precision Motors Armidale NSW –02 6772 5866 Rising Sun Townsville –07 4779 0211
Trailer Breakaway
The Tanami comes fitted with a Breakaway switch. The steel cable attached to the drawbar switch is
designed to attach to a solid part of your vehicle. In the event of a trailer disconnection, this will pull
out the pin from the switch and activate the trailer brakes. The brakes will stay locked on as long as
the pin is removed from the drawbar switch and there is power in the battery system of the hybrid. It
is important that the breakaway cable is not attached to the tow bar, but instead to the vehicle itself,
in the event the tow bar comes loose.
The breakaway system has a battery fitted under the seat of the Tanami, this is designed to supply the
breakaway system with power to lock the brakes on for at least 15 minutes when the pin is removed
from the drawbar switch. The breakaway battery charges from the house batteries fitted to the hybrid,
and as such will always show a charging light on the control box. When the test button is pushed, it
should display a green light. If any other light is displayed, please contact the service department for
more advice.
Do not use the breakaway system as an alternative to the handbrake or remove the pin from
the breakaway switch as an anti-theft measure, this will cause a rapid discharge of your house
batteries. This will leave your hybrid without power and can cause damage to the batteries.
Handbrake
The handbrake is operated mechanically by means of a cable. The cable attaches to the backing plate
and when the handbrake is applied the cable creates a force on the primary and secondary brake shoe.
This causes them to spread until they make contact with the brake drum surface.
The cable adjuster needs to provide enough tension that the handbrake is 1/3 raised when the hybrid
is unloaded. Once the hybrid is loaded, test and adjust if necessary. Insufficiently adjusted handbrake
will still allow the hybrid to move when the handbrake is fully raised.
It is very important to always use wheel chocks and levelling ramps, do not rely solely on the
handbrake even if on a level surface.

Head Office –07 5498 388 Brisbane North –07 5408 7111 Brisbane South –07 3112 7868
Newcastle NSW –02 4006 6833 Campbellfield VIC –03 9357 5081 Kewdale WA –08 6252 7007
Precision Motors Armidale NSW –02 6772 5866 Rising Sun Townsville –07 4779 0211
Setting up campsite
When setting up your campsite it is important to have the camper set up close to level but keeping a
small run off to the rear of the van to ensure water does not pool on the roof.
Picking a spot that is relatively level, gets sun during the day and is not under any large tree’s,
especially Gum trees, is important. If you are free camping, do not set up too close to a river or in an
area that is prone to flash flooding.
Stabiliser Legs
Levelling ramps will need to be used if excessive side to side levelling is required. Front to back levelling
is don’t using the jockey wheel. Once the hybrid is level, drop down the stabiliser legs. These are only
designed to be used for reducing the movement in the hybrid when set up, these are not to be used
for levelling. Using a drill or any power tool to adjust the height of the stabiliser leg will damage the
internal components of the leg and will void the warranty.
Jockey wheel
The hybrid is supplied with the Ark XO750 jockey wheel. This jockey wheel not only winds up and
down, but it also has adjustments available in the outer shaft, so no matter what vehicle or ground
level you are setting up on, you can safely adjust the jockey wheel.
The handle is removable, keep this somewhere inside your hybrid or vehicle when travelling.
Check out the video from Ark to properly use your jockey wheel -
https://www.youtube.com/watch?v=Ibe7zrAs0nc
It is important however, to never move the hybrid when the jockey wheel is extended past the
safe moving line on the extension shaft. The safe working load limit reduces past this line, and it may
cause the jockey wheel to bend or break under the load.