AUSTRALIAN MONITOR SY400V SY800V User manual

The Australian Monitor Synergy Series SY400V and SY800V offer contractors
ahost of practical features and deliver large amounts of power in a space
saving high performance package. The SY400V and SY800V are ideally suited
to today’s complex multi-zone 100v line systems.
SynergySeries
100V Line Models – Serious 100V Line Power
SY400V -2 x 200w at 100V Line
SY800V -2 x 375w at 100V Line

Features include
• Custom designed, 2RU heavy duty steel chassis.
• Symmetrical layout - even weight distribution.
• High current power supply.
• High efficiency toroidal mains transformer.
• Binding post outputs
• Dual Channel Operation
• Balanced inputs and buffered attenuators.
• 1 Watt output indication (2.828 volts).
• 1 dB below output clip indication.
• Efficient front to back cooling.
• Dual, twin speed axial fans.
• Multi-role output fault indication.
• Front carry handles.
• Rear rack mount ears.
• Signal ground lift switch.
• Built in limiter circuit.
• High-quality, close-tolerance components
The Synergy Series also feature
many levels of protection to
ensure a reliable and trouble-free
installation.
• Suppression of inrush current at mains turn-on.
• Input muting at turn-on.
• Input overvoltage protection.
• Radio-frequency interference suppression.
• Short-circuit protection and indication.
• High overload mains fuse.
• Internal, independent DC supply rail fuses.
Engineered and Distributed by
Audio Telex Communications Pty Ltd
ABN 78 001 345 482
149 Beaconsfield Street,
Silverwater, Sydney NSW 2128, Australia
NSW Tel [phone] Fax [phone]
VIC Tel [phone] Fax [phone]
QLD Tel [phone] Fax [phone]
SA Tel [phone] Fax [phone]
WA Tel [phone] Fax [phone]
NZ Tel [phone] Fax [phone]
International Enquiries
inter[email protected]
Website
www.australianmonitor.com.au
SynergySeries
Specifications
SY400V
Output power per channel into 200W per channel
100v line (max load 50 ohms) (both channels driven)
Bridge mode Not available
Frequency Response 50Hz-30kHz +/-3dB
Distortion <0.5%
Input Sensitivity 1Vrms
Voltage Gain 100
Signal to Noise 97dB
Input Impedance 20kohm
Input clipping +20dBV
Cooling Front to Back
Amplifier Indicators Power, Status(Signal/Clip),
Overload, Thermal, Fault
Amplifier Controls Level per channel, Ground Lift
Amplifier Protection Current Limiting, DC Protection,
mains fuse, DC rail fuses, Slow
Start, Thermal Cutout
Net weight 16kg
Shipping weight 18kg
Net Dimensions 87x482x400 HxWxD mm
Shipping dimensions 210x540x520 HxWxD mm
SY800V
Output power per channel into 375W per channel
100v line (max load 25 ohms) (both channels driven)
Bridge mode Not available
Frequency Response 50Hz-30kHz +/-3dB
Distortion <0.5%
Input Sensitivity 1Vrms
Voltage Gain 100
Signal to Noise 97dB
Input Impedance 20kohm
Input clipping +20dBV
Cooling Front to Back
Amplifier Indicators Power, Status(Signal/Clip),
Overload, Thermal, Fault
Amplifier Controls Level per channel, Ground Lift
Amplifier Protection Current Limiting, DC Protection,
mains fuse, DC rail fuses, Slow
Start, Thermal Cutout
Net weight 20kg
Shipping weight 22kg
Net Dimensions 87x482x400 HxWxD mm
Shipping dimensions 210x540x520 HxWxD mm