AUSTRALIAN MONITOR Synergy SY400 User manual

SynergySeries
Dual Channel Power Amplifiers
The Australian Monitor Synergy Series is aptly named. Taking from one side our years of experience in the
touring and hire markets, and from the other our years of experience in the installation market, we have
combined our experiences to create a high performance, low cost amplifier worthy of installations and hire.
An extensive market survey showed that whilst the lower cost amplifier market is growing, most people
were not satisfied with the end product. In many cases the sound quality was very poor and very few
people bought the same amplifier twice, constantly looking for a better performing amplifier that offered
exceptional value for money.
We have the solution. The Synergy Series has been a long term development project. We have not rushed
anything and we have spent a lot of time and money getting it right. There are now thousands of happy
Synergy Series customers across the world. We welcome you to join them.
Unlike most amplifiers in this price bracket, the Synergy Series does sound exceptionally good
- please compare!

SynergySeries
Specifications
SY400
Output power
per channel at 4 ohms 200W
Output power
per channel at 8 ohms 130W
Output power in bridge
mode at 8 ohms 400W
Frequency Response 15Hz-80kHz
+0dB -3dB
Distortion Better than 0.03%
Input Sensitivity 1Vrms
Voltage Gain 28.3
Slew Rate >40V/us
Damping Factor >375:1
Signal to Noise Better than 97dB
Input Impedance 20kohm
Input clipping +20dBV
Cooling Front to Back
Amplifier Indicators Power, Status(Signal/
Clip), Overload,
Thermal, Fault
Amplifier Controls Volume, Ground Lift,
Bridge Switch, Limiter
Amplifier Protection Current Limiting, DC
Protection, mains fuse,
DC rail fuses, Slow
Start, Thermal Cutout
Dimensions 87x482x400
Net weight 10kg
Shipping weight 12kg
Shipping dimensions 210x540x470
SY800
Output power
per channel at 4 ohms 375W
Output power
per channel at 8 ohms 235W
Output power in bridge
mode at 8 ohms 750W
Frequency Response 15Hz-70kHz
+0dB -3dB
Distortion Better than 0.03%
Input Sensitivity 1Vrms
Voltage Gain 38.7
Slew Rate >40V/us
Damping Factor >430:1
Signal to Noise Better than 97dB
Input Impedance 20kohm
Input clipping +20dBV
Cooling Front to Back
Amplifier Indicators Power, Status(Signal/
Clip), Overload,
Thermal, Fault
Amplifier Controls Volume, Ground Lift,
Bridge Switch, Limiter
Amplifier Protection Current Limiting, DC
Protection, mains fuse,
DC rail fuses, Slow
Start, Thermal Cutout
Dimensions 87x482x400
Net weight 13kg
Shipping weight 15kg
Shipping dimensions 210x540x470
SY1200
Output power
per channel at 4 ohms 600W
Output power
per channel at 8 ohms 390W
Output power in bridge
mode at 8 ohms 1200W
Frequency Response 15Hz-75kHz
+0dB -3dB
Distortion Better than 0.03%
Input Sensitivity 1Vrms
Voltage Gain 49.0
Slew Rate >41V/us
Damping Factor >450:1
Signal to Noise Better than 97dB
Input Impedance 20kohm
Input clipping +20dBV
Cooling Front to Back
Amplifier Indicators Power, Status(Signal/
Clip), Overload,
Thermal, Fault
Amplifier Controls Volume, Ground Lift,
Bridge Switch, Limiter
Amplifier Protection Current Limiting, DC
Protection, mains fuse,
DC rail fuses, Slow
Start, Thermal Cutout
Dimensions 87x482x450
Net weight 15kg
Shipping weight 17kg
Shipping dimensions 210x540x520
SY1600
Output power
per channel at 4 ohms 800W
Output power
per channel at 8 ohms 490W
Output power in bridge
mode at 8 ohms 1600W
Frequency Response 15Hz-62kHz
+0dB -3dB
Distortion Better than 0.03%
Input Sensitivity 1Vrms
Voltage Gain 56.5
Slew Rate >41V/us
Damping Factor >430:1
Signal to Noise Better than 97dB
Input Impedance 20kohm
Input clipping +20dBV
Cooling Front to Back
Amplifier Indicators Power, Status(Signal/
Clip), Overload,
Thermal, Fault
Amplifier Controls Volume, Ground Lift,
Bridge Switch, Limiter
Amplifier Protection Current Limiting, DC
Protection, mains fuse,
DC rail fuses, Slow
Start, Thermal Cutout
Dimensions 87x482x450
Net weight 18kg
Shipping weight 20kg
Shipping dimensions 210x540x520
Engineered and Distributed by
Audio Telex
Communications Pty Ltd
ABN 78 001 345 482
149 Beaconsfield Street,
Silverwater, Sydney NSW 2128,
Australia
NSW Tel [phone]
Fax [phone]
VIC Tel [phone]
Fax [phone]
QLD Tel [phone]
Fax [phone]
SA Tel [phone]
Fax [phone]
WA Tel [phone]
Fax [phone]
NZ Tel [phone]
Fax [phone]
International Enquiries
inter[email protected]
Website
www.australianmonitor.com.au
UNLIKE MOST AMPLIFIERS IN
THIS PRICE BRACKET,
THE SYNERGY SERIES DOES
SOUND EXCEPTIONALLY GOOD
- PLEASE COMPARE!
• It is very reliable
• It is very well constructed
• It features in-built clip limiting
• Ground Lift Facility
• Twin fans for efficient cooling
• It is genuinely suitable for
installations and hire
applications
• Industry standard XLR inputs
and speakon/binding post
outputs
FIVE SOLID LEVELS OF
PROTECTION:
• Overload
• Output Short Circuit
• Thermal
• Output DC Protection
• Slow Start Facility
FIVE STAGE INDICATION:
• Power
• Status/Clip (L/R)
• Overload
• Thermal
• Fault