Auto Care Products Park Smart Clean Park User manual

Clean Park®
Auto Care Products, Inc.
6345 Nancy Ridge Drive
San Diego, CA 92121
Warning:
• The Clean Park® is Slippery When Wet.
• For use with Snow Chains or Studded Snow Tires, Protector Strips purchased from
Auto Care Products, Inc. or carpet runner protectors (without spikes), which can be
purchased at your local hardware store, must be used to protect the Garage Mat.
• Do Not Turn Front Tires While Vehicle is Stationary on the Clean Park®.
For More Information Contact: Auto Care Products, Inc.
6345 Nancy Ridge Drive
San Diego, CA 92121
[phone] or [phone]
Fax: [phone]
Email: [email protected]
www.autocareproducts.com
U.S. Patent #6,258,430
Park Smart®Clean Park®
One (1) Year Limited Warranty
Auto Care Products, Inc. warrants your Park Smart®Clean Park® to be free from defects in material
and workmanship for a period of one (1) year from the date of purchase, subject to the following
conditions and limitations:
Conditions:
1. This warranty only applies to the original purchaser of the Park Smart®Clean Park®.
2. The attached warranty registration form must be completely lled out and mailed to Auto Care Products, Inc.
within fourteen (14) days of purchase.
Limitations:
This warranty does not cover the following:
1. Improper installation of the Park Smart®Clean Park®.
2. Placement of the Park Smart®Clean Park® on any surface that is not smooth and at.
3. Improper use of the Park Smart®Clean Park®.
4. Use with snow chains or studded snow tires.
5. Punctures caused by rocks and other sharp objects.
6. Use of Solvents, Chemicals and Detergents to clean the Park Smart®Clean Park®.
7. Normal wear and tear.
8. Discoloration of the vinyl sheeting that may occur over time.
9. Tire impressions made on the vinyl sheeting, which is considered normal.
Should a defect occur, contact Auto Care Products, Inc. to request a Return Authorization Number.
No returns will be accepted without a Return Authorization Number. It is the responsibility of the
customer to pay for all shipping costs including insurance. Upon receipt of the returned part(s),
Auto Care Products, Inc. will either repair or replace the defective part(s) as it deems necessary

Warning:
Rocks and other sharp objects may puncture the Clean Park®. To avoid punctures, regularly
remove debris by sweeping with a soft bristle broom.
Cleaning Instructions:
Remove one or more of the end pieces closest to the garage door. Be careful not to puncture or cut
the vinyl sheeting with the edge of the top piece as you pull it off. Sweep the Clean Park® with a soft
bristle broom. Hose off the Clean Park®. Use a soft bristle broom to push water towards the open
area, off of the Clean Park®. Only a mild dish soap may be used on the Clean Park®. Do Not Use
Solvents, Harsh Chemicals, Abrasive Cleaners or Bleach.
Name:__________________________________________________________________
Address:________________________________________________________________
City:____________________ State/Province:___________Zip/Postal Code:__________
Country:______Phone: _______________ Email address:_________________________
Please email me about new products and special discount promotions.
Park Smart®Clean Park®Model or Size: _______________ Purchase Price:____________
Purchased From:__________________________________Date of Purchase:__________
NOTE: All Clean Parks®can be shortened by 2’ increments just by omitting long V-Shaped side pieces
and cutting the vinyl sheet, as described in Step 2.
Sweep or vacuum garage oor. Repair
or cover (with duct tape) any cracks in
garage oor.
1. Attach long V-Shaped pieces to left and right sides. Start at the edge closest to the street. See gure 1.
2. On the end farthest away from the street, cut down vinyl sheet so it protrudes 1½” inches beyond
the last long V-Shaped side piece. See gure 2.
3. On the side farthest away from the street, attach the short V-Shaped pieces. See gure 3.
4. Next, lay the at parts with the mushroom shaped prole on the oor, under the edge of the vinyl
sheeting, closest to the street. See gure 4.
5. Each kit has two ramp sections with a rounded corner. These ramp sections snap on top of vinyl
sheet, with the rounded corner next to the long V-Shaped side pieces. See gures 5 & 6. First,
snap down the ramp sections with the rounded corners, on the left and right sides of the Garage
Mat. The ramp sections snap over the over vinyl sheeting, onto the at parts with the mushroom
shaped prole. See gure 7. Next, start at the left side, and snap down the remaining top
ramp sections.
Discoloration of the vinyl sheeting may occur over time and does not affect the integrity of
the material. Tire imprints due to the weight of your vehicle on the vinyl sheeting may occur
and will not affect your Clean Park®.
Assembly Instructions
Figure 2 Figure 3
Figure 5
Figure 4
Figure 1
Figure 7
Figure 6
Complete the Warranty Registration Form below and mail it within fourteen (14) days of purchase.