Autonomous Clone Robot User manual
Instruction Manual
Before You Start
Step 1:
Step 2:
Page 1
Clone’s Tablet Setup Instruction
Step 1: Download Autonomous Clone App from the Google Play Store
by scanning this QR code
Step 2: Register for a new Autonomous account or log in
Step 3: Allow the app to access device’s camera, microphone, speaker and location
Page 2
Step 4: Add a new clone by pressing + button
Step 5: Fill in the following information to setup Clone
SSID: Your Wi-Fi name (Clone will pick the first available 2.4GHz network)
Password: Your Wi-Fi password
Clone’s Wifi: Name of Clone’s Wireless Network
Clone’s name: Preferred name for your Clone
Page 3
Optional: You can pick a different Wi-Fi network if the default one is not correct
Step 6: Wait for the connection to be finish
Page 4
*Please restart clone robot once in
order for auto docking to work
Tablet Installation Guide
(Holder Style A)
Insert the tablet on to the tablet holder
Tighten the indicated screws to
secure the tablet. Careful to not
overtighten the screws to damage
the tablet
Adjust the holder according
to your tablet size using
indicated screws
Page 5
Tablet Installation Guide
(Holder Style B)
Page 6
Pull the two claws on the ends of the holder and clamp them on the
opposite side of your tablet. Make sure the tablet is firmly secured. Adjust
the tablet to upright position.
Clip-On Fisheye lens
Page 7
Clip the fish-eye lens on top of the tablet’s front camera
Note: You can use the tablet’s camera app to help adjust the lens alignment
Remote Control Using
Mobile Application
Step 1: Download Clone Remote Control App from the Google Play Store
by scanning this QR code
Step 2: Register for a new Autonomous account or log in
Page 8
Step 3: Allow the app to access device’s camera, microphone, speaker and location
Step 4: Click on your clone icon to connect to it
Page 9
Mute/Unmute
Volume Control
Take Snapshot
End call
Directional Buttons - Press once to turn left/right
or go forward / blackward
Stop Button - Press once to stop
Control scheme
Page 10
Autodock
Remote Control Using
Web Control Interface
Login to https://clone.ai with your account
Click on “Move” button to start calling your Clone
Clone home screen
Page 11
Web interface mainscreen
Use the following control scheme to direct Clone
Tablet BatteryBase Battery
Click on this icon to
initiate autodocking
procedure
Take Photo
Speedometer
Hang Up Volume
Control
Mute View Gallery
T
T
Page 12
Table of contents
